1. Producte acabatview
The Sunlite T12 Straight Tube Fluorescent Lamp is an energy-efficient and cost-effective lighting solution designed for various environments. This 20-watt lamp provides 1150 lumens of bright, consistent illumination with a cool white light at 4100K, creating a clean and refreshing ambiance. Its G13 bi-pin base ensures easy installation, and with an impressive lifespan of 8,000 hours, it minimizes the need for frequent replacements.
Característiques principals:
- Disseny tradicional: Sleek and modern, blending effortlessly into any setting.
- Eficient energètic: Consumes only 20 watts, reducing electricity consumption and carbon footprint.
- Llarga vida útil: Boasts an average rated life of 8,000 hours for long-term, hassle-free use.
- Alt Brillantor: Delivers 1150 lumens for excellent visibility and vibrant colors.
- Base de dos pins G13: Ensures easy and secure installation in compatible fixtures.
- Llum blanca freda: 4100K color temperature provides a clean and refreshing glow.
Image: Sunlite F20T12/CW Fluorescent Lamps (30-pack).
2. Guia d'instal·lació
Before beginning installation, ensure the power supply to the fixture is completely disconnected to prevent electrical shock. Always handle fluorescent lamps by the ends to avoid damaging the glass or internal components.
Passos d'instal·lació:
- Apagar: Turn off the power to the lighting fixture at the circuit breaker or wall switch.
- Elimina la L antigaamp (si escau): Si es substitueix una l existentamp, gently twist the old lamp to disengage it from the sockets and carefully remove it.
- Alinear els pins: Align the two bi-pins on each end of the new Sunlite F20T12/CW lamp with the slots in the fixture's lamptitulars.
- Inserir i girar: Insert the pins into the slots and gently twist the lamp approximately 90 degrees until it clicks securely into place. Ensure both ends are firmly seated.
- Restaura l'alimentació: Un cop lamp is securely installed, restore power to the fixture. The lamp hauria d’il·luminar.
Image: Lamp dimensions and G13 bi-pin base detail.
3. Funcionament
The Sunlite F20T12/CW Fluorescent Lamp operates immediately upon receiving power from a compatible fixture. Simply use the fixture's switch to turn the lamp on or off. This lamp is designed for indoor use and provides consistent, cool white illumination suitable for a variety of settings.
Aplicacions típiques:
- Offices and Commercial Spaces
- Garatges i tallers
- Basements and Utility Rooms
- Residential Lighting (e.g., kitchens, laundry rooms)
Image: Sunlite T12 lamps providing illumination in an office setting.
4. Manteniment
Fluorescent lamps require minimal maintenance. Regular cleaning and proper handling will help ensure optimal performance and extend their lifespan.
Cura i neteja:
- Neteja: Assegureu-vos que lamp is off and cool before cleaning. Gently wipe the lamp with a soft, dry, lint-free cloth to remove dust and debris. Do not use liquid cleaners or abrasive materials, as these can damage the lampla superfície.
- Manipulació: Manegeu sempre la lamp by its ends. Avoid touching the glass tube directly with bare hands, as oils from your skin can create hot spots and reduce lamp vida.
- Substitució: Substituïu la lamp when its light output significantly diminishes, it begins to flicker excessively, or it fails to illuminate.
Eliminació:
Fluorescent lamps contain small amounts of mercury and should be disposed of according to local regulations. Do not dispose of them in regular household trash. Contact your local waste management facility or recycling center for proper disposal instructions.
5. Solució De Problemes
If your Sunlite F20T12/CW lamp is not functioning as expected, refer to the following common issues and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Lamp no s’encén | Sense poder per fixar Lamp not properly seated Defectuós lamp Defective ballast (in fixture) | Comproveu l'interruptor de circuit i l'interruptor de paret Assegureu-vos lamp pins are fully inserted and twisted securely Substitueix lamp amb un de nou Consult an electrician to check/replace ballast |
| Lamp flickers or hums | Connexió fluixa Lamp a prop del final de la vida Incompatible or failing ballast Temperatura ambient baixa | Torneu a col·locar la lamp fermament Substitueix lamp Consult an electrician to check/replace ballast Ensure operating temperature is within recommended range |
| Reducció de la producció de llum | Dust/dirt on lamp Lamp a prop del final de la vida | Neteja lamp amb un drap sec Substitueix lamp |
6. Especificacions tècniques
| Atribut | Especificació |
|---|---|
| Marca | Sunlite |
| Nom del model | Sunlite 30010 |
| Número de model de l'article | F20T12/CW |
| Tipus de llum | Fluorescent |
| Wattage | 20 watts |
| Brillantor | 1150 lúmens |
| Temperatura de color | 4100 Kelvin (blanc fred) |
| Base del bulb | G13 (Medium Bi-Pin) |
| Average Rated Lifespan | 8,000 hores |
| Voltage | 120 Volts |
| Dimensions del producte | 24" d'amplada x 1.5" d'alçada |
| Material | Policarbonat (PC) |
| Ús interior/exterior | Interior |
Image: Key technical specifications of the lamp.
7. Informació de la garantia
For detailed warranty information regarding your Sunlite F20T12/CW Fluorescent Lamp, please refer to the packaging of the product. The warranty terms and conditions, including coverage period and claim procedures, are provided directly on the product packaging.
8. Atenció al client
Should you have any questions, require technical assistance, or need to report an issue with your Sunlite F20T12/CW Fluorescent Lamp, please contact Sunlite customer support. Refer to the product packaging or the official Sunlite website for the most current contact information, including phone numbers, email addresses, or online support portals.
