Kett KS-426 Panel Cutting Saw User Manual

Introducció

The Kett KS-426 Panel Cutting Saw is designed for precision cutting of various materials. It efficiently slits thin-walled metal-clad cable for stripping and can be used on both aluminum and steel armored cable. The saw features a cast aluminum head with a positive depth-stop, allowing precise blade penetration to protect insulated wires. This variable-speed electric saw is capable of cutting panels, plastic, and other rigid materials up to 1/4-inch thick, aluminum up to 1/8-inch, and cold-rolled mild steel up to 16-gauge and lighter. Powered by a 2500 RPM, 5-AMP variable speed electric motor, it provides ample power for diverse cutting tasks.

Figure 1: Kett KS-426 Panel Cutting Saw

Informació de seguretat

Observeu sempre les precaucions de seguretat bàsiques per reduir el risc d'incendi, descàrrega elèctrica i lesions personals quan feu servir eines elèctriques.

• Llegeix totes les instruccions: Familiaritzeu-vos amb el funcionament de l'eina i les pautes de seguretat abans d'utilitzar-la.
• Utilitzeu l'equip de protecció individual (EPI) adequat: Utilitzeu sempre ulleres de seguretat, protecció auditiva i guants.
• Assegurar la peça de treball: Ensure the material being cut is stable and clamped securely to prevent movement during operation.
• Mantenir una zona de treball neta: Les zones desordenades i els bancs conviden a accidents.
• Eviteu entorns perillosos: No utilitzeu eines elèctriques a damp o llocs humits, o exposar-los a la pluja. Mantenir la zona de treball ben il·luminada.
• Mantenir els nens allunyats: Tots els visitants s'han de mantenir a una distància segura de la zona de treball.
• Emmagatzema les eines inactives: Quan no s'utilitzin, les eines s'han de guardar en un lloc sec, alt o tancat amb clau, fora de l'abast dels nens.
• No forceu l'eina: Farà la feina millor i més segur al ritme per al qual va ser dissenyat.
• Utilitzeu l'eina adequada: Do not force small tool or attachment to do the job of a heavy duty tool.
• Vesteix correctament: No porteu roba solta ni joies. Poden quedar atrapats en parts mòbils. Es recomanen guants de goma i calçat antilliscant quan es treballa a l'aire lliure. Utilitzeu una coberta protectora per al cabell per contenir els cabells llargs.
• Desconnectar les eines: When not in use, before servicing, or when changing accessories, disconnect tools from power supply.
• Eviteu l'arrencada no intencionada: Do not carry plugged-in tool with finger on switch.
• Comproveu si hi ha peces danyades: Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless otherwise indicated elsewhere in this instruction manual.

Components

The Kett KS-426 Panel Cutting Saw includes the following main components:

• Saw Guard Assembly (268-20)
• Saw Body (156-21)
• Saw Guard (160-20)
• 2" & 2-1/2" Saw Blade
• Electric Motor (5-AMP, Variable Speed)
• Cast Aluminum Saw Head
• Depth-Stop Mechanism

Configuració

1. Desembalatge: Carefully remove the saw and all components from the packaging. Inspect for any damage that may have occurred during shipping.
2. Instal·lació de la fulla:
   • Assegureu-vos que l'eina estigui desconnectada de la font d'alimentació.
   • Refer to the saw guard assembly for proper blade orientation.
   • Securely fasten the saw blade using the provided hardware. Ensure it is seated correctly and tightened to prevent wobbling during operation.
3. Ajust de profunditat:
   • The saw features a positive depth-stop. Adjust the depth-stop to ensure the blade penetrates only the material's sheath, protecting underlying wires or surfaces.
   • Perform a test cut on a scrap piece of material to verify the desired cutting depth before beginning your project.
4. Connexió d'alimentació: Connect the 8-foot power cord to a standard 120-volt electrical outlet. Ensure the outlet is properly grounded.

Instruccions de funcionament

Follow these steps for safe and effective operation of your Kett KS-426 Panel Cutting Saw:

1. Preparació de la peça de treball: Place the material to be cut on a stable, flat surface. Secure it with clamps if necessary to prevent movement.
2. Agafeu l'eina: Hold the saw firmly with both hands, ensuring a secure grip on the handle. The ergonomic and lightweight design is intended for comfortable use.
3. Engegar la serra: Press the trigger switch to activate the motor. The variable speed feature allows you to control the RPM up to 2500 RPM. Start at a lower speed for initial engagement and increase as needed.
4. Comença a tallar: Gently guide the saw blade into the material. Apply steady, even pressure. Allow the saw to do the work; do not force it.
5. Follow Cut Line: Mantenir una clara view of your cutting line and guide the saw along it. The compact blade guard assists in smooth and safe plunge cuts.
6. Cutting Specific Materials:
   • Metal-Clad Cable: Use the depth-stop to set the blade to just penetrate the outer sheath, protecting the internal wires.
   • Panels, Plastic, Rigid Materials: Can cut up to 1/4-inch thick.
   • Alumini: Can cut up to 1/8-inch thick.
   • Cold-Rolled Mild Steel: Can cut up to 16-gauge and lighter.
7. Tall complet: Continue cutting until the desired length or shape is achieved.
8. Stop the Saw: Release the trigger switch to turn off the motor. Wait for the blade to come to a complete stop before setting the tool down.

Figure 2: Operating the Kett KS-426 Panel Cutting Saw

Manteniment

Regular maintenance ensures the longevity and optimal performance of your Kett KS-426 Panel Cutting Saw.

• Neteja: After each use, unplug the tool and clean off any dust, debris, or metal shavings from the saw head, blade, and motor vents. Use a dry cloth or soft brush.
• Inspecció de la fulla: Regularly inspect the saw blade for sharpness, damage, or excessive wear. A dull or damaged blade can affect cutting performance and safety. Replace blades as needed.
• Lubricació: Refer to the detailed service manual for specific lubrication points and schedules, if applicable. Generally, moving parts may require periodic lubrication.
• Inspecció del cable: Comproveu si el cable d'alimentació està tallat, esfilagarsat o danyat. No feu servir l'eina si el cable està danyat.
• Emmagatzematge: Store the tool in a dry, secure location away from moisture and extreme temperatures.

Resolució de problemes

Especificacions

Garantia

The Kett KS-426 Panel Cutting Saw comes with a GARANTIA LIMITADA D'1 ANY. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation included with your product or contact Kett customer support.

Atenció al client

For technical assistance, replacement parts, or warranty inquiries, please contact Kett Tool Company directly.

• Visit the official Kett Tool Company weblloc web amb informació de contacte i preguntes freqüents.
• Refer to the contact details provided on your product packaging or included documentation.