Introducció
The Kestrel 3500 Pocket Weather Meter is a robust and portable device designed to provide accurate environmental measurements. It is ideal for a variety of applications including outdoor sports, agriculture, research, and industrial use. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Kestrel 3500.
Image: The Kestrel 3500 Pocket Weather Meter, a compact yellow device. It features a rotating impeller at the top for wind speed measurement, a clear digital display in the center showing numerical readings, and three control buttons (left arrow, center select, right arrow) positioned below the screen for navigation and settings adjustment. The model number '3500' is visible on the right side of the display.
Configuració
Instal·lació de la bateria
- Localitzeu el compartiment de la bateria a la part posterior de la unitat.
- Using a coin, twist the battery compartment cover counter-clockwise to open.
- Insert the supplied AAA battery, ensuring the positive (+) end faces the correct direction as indicated inside the compartment.
- Replace the cover and twist clockwise to secure it. Do not overtighten.
Encès inicial
- Press and hold the center button (O) for approximately 2 seconds to power on the device.
- The display will illuminate and show the current measurement mode.
En funcionament
Modes de navegació
- Use the left (◀) i dreta (▶) arrow buttons to cycle through the available measurement modes.
- Available modes typically include: Wind Speed (current, average, max gust), Temperature, Relative Humidity, Barometric Pressure, Altitude, and Dew Point.
Prendre mesures
- Velocitat del vent: Point the back of the unit into the wind, allowing the impeller to rotate freely. The display will show the current wind speed.
- Temperatura/humitat: Ensure the sensors are exposed to the ambient air. Avoid direct sunlight or holding the unit for extended periods, as body heat can affect readings.
- Barometric Pressure/Altitude: For accurate altitude readings, calibrate the unit to a known reference altitude or pressure. Refer to the calibration section in the full manual for detailed steps.
Selecció d'unitats
- To change measurement units (e.g., mph to km/h, °F to °C), navigate to the desired measurement mode.
- Press and hold the center button (O) for 2 seconds. The unit will flash.
- Use the arrow buttons to select the desired unit.
- Press the center button (O) again to confirm your selection.
Manteniment
Neteja
- Netegeu l'exterior de la unitat amb un damp tela. No utilitzeu netejadors abrasius ni dissolvents.
- For the impeller, gently blow air through it to remove dust or debris. Avoid using compressed air directly on the bearings.
Canvi de bateria
- When the low battery indicator appears on the display, replace the AAA battery promptly.
- Seguiu els passos d'instal·lació de la bateria que s'indiquen a la secció Configuració.
Emmagatzematge
- Store the Kestrel 3500 in a cool, dry place away from direct sunlight and extreme temperatures.
- Si l'emmagatzemeu durant un període prolongat, retireu la bateria per evitar fuites.
Resolució de problemes
- La unitat no s'encén: Comproveu la instal·lació de la bateria i assegureu-vos que la bateria sigui nova.
- Lectures inexactes: Ensure sensors are clean and unobstructed. Allow the unit to acclimate to the environment for a few minutes before taking readings. For wind speed, ensure the impeller is spinning freely.
- La pantalla està en blanc o congelada: Remove and reinsert the battery to perform a soft reset. If the issue persists, contact customer support.
Especificacions
- Dimensions: Aproximadament 4.8 x 1.7 x 1.1 polzades (122 x 42 x 28 mm)
- Pes: Approximately 2.3 ounces (65 grams) with battery
- Potència: 1 x piles AAA (incloses)
- Temperatura de funcionament: -22 a 122 °F (-30 a 50 °C)
- Resistència a l'aigua: IP67 (submergible fins a 1 metre durant 30 minuts)
- Mides: Wind Speed (current, average, max gust), Temperature, Relative Humidity, Barometric Pressure, Altitude, Dew Point, Heat Index, Wind Chill.
Garantia i Suport
Kestrel products are designed for durability and accuracy. For specific warranty details and to register your product, please refer to the official Kestrel website or the warranty card included with your purchase. For technical support, troubleshooting assistance beyond this manual, or replacement parts, please contact Kestrel customer service directly.
Note: Specifications and features are subject to change without notice. Always refer to the latest information available from the manufacturer.
