1. Introducció
The AGPTEK Flameless LED Tea Lights provide a safe and convenient alternative to traditional candles. These battery-operated tea lights feature a flickering warm white light effect and an integrated timer function, making them suitable for various decorative purposes without the concerns of open flames or melting wax. This manual provides instructions for the proper setup, operation, and maintenance of your LED tea lights.

AGPTEK Flameless LED Tea Lights displayed in a glass holder with decorative elements, showcasing their warm glow.
2. Informació de seguretat
- Mantingueu les piles fora de l'abast dels nens i les mascotes.
- No barregeu piles velles i noves, o diferents tipus de piles.
- Eliminar les bateries usades d'acord amb la normativa local.
- Do not expose the tea lights to extreme temperatures or direct sunlight for prolonged periods.
- These tea lights are not waterproof. Avoid contact with water or moisture.

Comparison of LED candles versus traditional candles, illustrating the benefits of LED candles: energy-saving, flameless, no dripping wax, and no risk of fire.
3. Contingut del paquet
Verifiqueu que tots els elements siguin presents al vostre paquet:
- 24 x LED Tealight Candles
- 24 x CR2032 Coin Batteries (pre-installed inside the candles)
4. Configuració
Instal·lació de la bateria
The AGPTEK LED tea lights come with CR2032 button cell batteries pre-installed. If you need to replace the battery:
- Locate the battery compartment cover on the bottom of the tea light.
- Use a small coin or screwdriver to gently open the cover.
- Traieu la bateria CR2032 antiga.
- Introduïu una pila CR2032 nova amb el costat positiu (+) cap amunt.
- Tanqueu de manera segura la tapa del compartiment de la bateria.

Detallada view of the AGPTEK LED tea light, illustrating its dimensions (36mm/1.4inch diameter and height) and the battery compartment with a CR2032 button cell for easy replacement.
5. Instruccions de funcionament
Encès/Apagat
Each tea light has a small slide switch located on its bottom. To turn the tea light ON, slide the switch to the 'ON' position. To turn it OFF, slide the switch to the 'OFF' position.
Funció de temporitzador
The AGPTEK LED tea lights feature an automatic timer function. Once you turn the switch to the 'ON' position, the tea light will illuminate for 6 hours, then automatically turn off for 18 hours. This 24-hour cycle will repeat daily. To reset the timer, simply turn the tea light OFF and then ON again at your desired start time.

Diagram illustrating the ON/OFF switch on the bottom of the tea light and the 6-hour on, 18-hour off timer cycle for automatic operation.
6. Manteniment
Neteja
To clean the tea lights, gently wipe them with a soft, dry cloth. Do not use abrasive cleaners or immerse them in water.
Canvi de bateria
When the light appears dim or stops working, it is time to replace the CR2032 battery. Refer to the 'Battery Installation' section under 'Setup' for detailed instructions.
7. Solució De Problemes
- Tea light does not turn on: Ensure the switch is in the 'ON' position. Check if the battery is correctly installed with the positive (+) side up. Replace the battery if it is depleted.
- La llum és tènue: This indicates a low battery. Replace the CR2032 battery.
- Timer function not working as expected: Ensure the tea light was turned ON at the desired start time. The timer cycle begins from the moment the switch is set to 'ON'. To reset, turn OFF and then ON again.
8. Especificacions
| Marca | AGPTEK |
| Nom del model | AGPTEK Timer Tea Lights |
| Material | PP+LED |
| Tipus de font de llum | LED |
| Color clar | Blanc càlid |
| Efecte de llum | Flickering Flashing |
| Dimensions del producte | 1.4"D x 1.4"W x 1.4"H (3.6cm Diameter x 3.6cm Height) |
| Pes de l'article | 1.6 ounces (per tea light) |
| Tipus de bateria | Cèl·lula botó CR2032 |
| Durada de la bateria | 72-100 hores |
| Funció de temporitzador | 6 hours ON, 18 hours OFF (24-hour cycle) |
| Nombre d'articles | 24 |
9. Garantia i Suport
For warranty information or technical support, please refer to the product packaging or contact AGPTEK customer service through the retailer where the product was purchased. Please retain your proof of purchase for any warranty claims.





