1. Introducció
The Schneider Electric Compact NSX series circuit breakers and switch-disconnectors are designed for controlling and isolating electrical distribution circuits in both tertiary and industrial applications. The Compact NSX range offers high performance, a wide selection of trip units, and various display and communication modules to meet diverse system requirements.
This manual provides essential information for the safe and effective installation, operation, and maintenance of the Compact NSX630H Micrologic 5.3 A Circuit Breaker (Model LV432902).
2. Producte acabatview
The Compact NSX630H Micrologic 5.3 A Circuit Breaker is a robust device featuring 4 poles, suitable for both fixed and withdrawable installations. It incorporates an electronic trip unit for precise protection.
Figura 2.1: Frontal view of the Schneider Electric Compact NSX630H Micrologic 5.3 A Circuit Breaker.
This image displays the main components of the circuit breaker, including the main body, the operating handle, the Micrologic 5.3 A trip unit with its display and control buttons, and the terminal connections. The "OFF" indicator is visible on the handle mechanism. Technical specifications such as voltage ratings (Ue, Ui, Uimp) and breaking capacities (Icu, Ics, HIC) are printed on the front label.
2.1 Key Components and Indicators
- Mànec de funcionament: Used to manually switch the circuit breaker ON or OFF. Features a clear "OFF" indicator.
- Micrologic 5.3 A Trip Unit: An electronic trip unit providing advanced protection functions. It includes a digital display and control buttons for setting parameters.
- Pantalla de visualització: Shows current settings, measurements, and status information (e.g., "630 A" for rated current).
- Botons de control: "Mode" and "OK" buttons for navigating menus and confirming settings on the Micrologic unit.
- Trip Indicators: Visual indicators for trip status (e.g., "Trip" LED).
- Terminals: Connections for electrical conductors, designed for secure and reliable wiring.
- Etiqueta de qualificació: Provides essential electrical specifications such as rated voltage (Ue, Ui), impulse withstand voltage (Uimp), and ultimate breaking capacity (Icu, Ics) at various voltages.
3. Configuració i instal·lació
Installation of the Compact NSX630H circuit breaker should only be performed by qualified personnel in accordance with all local and national electrical codes and regulations. Ensure power is disconnected before beginning any installation work.
3.1 Muntatge
The circuit breaker can be installed in either a fixed or withdrawable configuration. Refer to the specific mounting instructions provided with the mounting accessories for detailed steps.
3.2 Connexions elèctriques
- Connect the incoming and outgoing power cables to the designated terminals. Ensure proper torque is applied to all terminal screws to prevent loose connections and overheating.
- Comproveu que el voltage and frequency of the electrical system match the ratings of the circuit breaker (e.g., 50/60 Hz, up to 690V).
- Ensure correct phase sequence and neutral connection (indicated by 'N' on the breaker).
3.3 Trip Unit Configuration (Micrologic 5.3 A)
The Micrologic 5.3 A trip unit allows for precise adjustment of protection parameters. Use the "Mode" and "OK" buttons to navigate the display and set the following:
- Ir (Long-time protection): Adjustable rated current from 250A to 630A. This setting determines the overload protection threshold.
- tr (Long-time delay): Time delay for long-time protection.
- Isd (Short-time protection): Short-circuit protection threshold, adjustable as a multiple of Ir.
- tsd (Short-time delay): Time delay for short-time protection.
- li (Instantaneous protection): Instantaneous short-circuit protection threshold.
Refer to the detailed Micrologic 5.3 A user guide for advanced programming and communication module (RS485 or Ethernet) setup, if applicable.
4. Instruccions de funcionament
4.1 Encesa/apagada
- To switch the circuit breaker ON, push the operating handle upwards until it latches.
- To switch the circuit breaker OFF, push the operating handle downwards until it latches. The "OFF" indicator will be visible.
4.2 Indicació de desconnexió i reinici
In the event of an overload or short-circuit, the circuit breaker will automatically trip, moving the operating handle to an intermediate position (between ON and OFF) and illuminating the "Trip" indicator (if present). To reset the breaker after a trip:
- Identify and rectify the cause of the trip (e.g., overload, short-circuit).
- Fully push the operating handle downwards to the OFF position.
- Then, push the operating handle upwards to the ON position.
If the breaker trips immediately after resetting, do not attempt to re-engage it without further investigation of the electrical circuit.
5. Manteniment
Regular maintenance ensures the longevity and reliable operation of your circuit breaker. Always disconnect power before performing any maintenance.
- Inspecció visual: Inspeccioneu periòdicament l'interruptor automàtic per detectar qualsevol signe de danys físics, decoloració, connexions soltes o acumulació excessiva de pols.
- Neteja: Use a dry, lint-free cloth to gently clean the exterior of the circuit breaker. Do not use abrasive cleaners or solvents.
- Comprovació del terminal: Annually check the tightness of all terminal connections. Loose connections can lead to overheating and potential failure.
- Comprovació operativa: Periodically operate the circuit breaker manually (ON/OFF) to ensure smooth mechanical action.
For detailed maintenance procedures, consult the comprehensive technical documentation provided by Schneider Electric.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| L'interruptor automàtic salta amb freqüència. | Overload, short-circuit, ground fault, incorrect trip unit settings. |
|
| L'interruptor automàtic no es reinicia. | Persistent fault, internal damage, or mechanical issue. |
|
| Micrologic display is blank or unresponsive. | No power to the trip unit, internal fault. |
|
7. Especificacions
| Paràmetre | Valor |
|---|---|
| Número de model | LV432902 |
| Marca | Schneider Electric |
| Nombre de pols | 4 |
| Tipus d'unitat de viatge | Micrologic 5.3 A (Electronic) |
| Rated Current (Ir) | 630 A (Adjustable 250-630A) |
| Aïllament nominal Voltage (Ui) | 800 V |
| Resistència d'impuls nominal Voltage (Uimp) | 8 kV |
| Rated Operational Frequency | 50/60 Hz |
| Ultimate Breaking Capacity (Icu) at 220/240V~ | 40 kA |
| Ultimate Breaking Capacity (Icu) at 380/415V~ | 36 kA |
| Ultimate Breaking Capacity (Icu) at 440V~ | 30 kA |
| Ultimate Breaking Capacity (Icu) at 500V~ | 25 kA |
| Ultimate Breaking Capacity (Icu) at 525V~ | 22 kA |
| Ultimate Breaking Capacity (Icu) at 660/690V~ | 8 kA |
| Dimensions (L x A x A) | 0.03 x 10 x 10 cm |
| Pes | 1 kg |
| Normes | IEC/EN 60947-2, NEMA AB1 |
8. Garantia i Suport
Specific warranty information for the Schneider Electric Compact NSX630H Micrologic 5.3 A Circuit Breaker (Model LV432902) is not provided in the available product data. For detailed warranty terms and conditions, please refer to the official Schneider Electric weblloc web o contacteu directament amb el seu servei d'atenció al client.
Information regarding the availability of spare parts for this product is currently unavailable. For technical support, service, or inquiries about spare parts, please contact Schneider Electric customer service or your local authorized distributor.
