Producte acabatview
The Oxygenics 88446 Power Massage Hand Held Showerhead is designed to provide an intensely satisfying shower experience while conserving water. Featuring advanced amplifying technology and oxygen-infused water, this showerhead delivers powerful spray performance even with lower water pressure. Its durable construction and easy-clean nozzles ensure long-lasting, clog-free operation.
Figure 1: Oxygenics 88446 Power Massage Hand Held Showerhead, showcasing its brushed nickel finish and spray face.
Característiques principals:
- 5 Configuracions de polvorització: Customize your shower experience from a gentle rinse to a powerful massage.
- Amplifying Technology: Infuses water with oxygen to create a more powerful spray, enhancing pressure and coverage.
- Oxygen-Infused Water: Provides a revitalizing and invigorating shower.
- Durable Brushed Nickel Finish: Resists corrosion and tarnishing, maintaining its aesthetic appeal.
- Non-Stick Internal Parts: Engineered to prevent mineral buildup and clogging, ensuring consistent performance.
- Broquets fàcils de netejar: Simple to wipe clean, preventing limescale accumulation.
- Standard 1/2 inch Connection: Compatible with most standard shower arms.
- 60-Inch Hose: Provides extended reach and flexibility for handheld use.
Configuració i instal·lació
This showerhead is designed for quick and easy installation, typically taking only a few minutes. No specialized tools are required beyond what is commonly found in a household.
Què inclou:
- Oxygenics Handheld Showerhead
- 60" Shower Hose
- Shower Arm Diverter/Holder
- Plumber's Tape (Teflon Tape)
Passos d'instal·lació:
- Prepareu el braç de dutxa: Ensure the water supply to your shower is turned off. Unscrew and remove your existing showerhead from the shower arm. Clean any residue from the shower arm threads.
- Aplicar cinta de lampista: Wrap plumber's tape (provided) clockwise around the threads of the shower arm 3-4 times. This helps create a watertight seal.
- Install the Diverter/Holder: Screw the shower arm diverter/holder onto the taped shower arm threads. Hand-tighten only. Do not use tools, as this may damage the unit. Ensure the diverter is oriented correctly for the hose connection.
- Attach the Hose to the Diverter: Apply plumber's tape to the threads of one end of the 60" shower hose. Screw this end onto the bottom outlet of the diverter/holder. Hand-tighten only.
- Attach the Showerhead to the Hose: Apply plumber's tape to the threads of the showerhead's handle. Screw the other end of the 60" shower hose onto the showerhead handle. Hand-tighten only.
- Place Showerhead in Holder: Insert the showerhead into the holder on the diverter.
- Prova de fuites: Turn on the water supply and check for any leaks at all connection points. If leaks occur, turn off the water, re-tape the threads, and re-tighten the connections.
Instruccions de funcionament
The Oxygenics Power Massage Hand Held Showerhead offers multiple spray settings for a customized showering experience.
Canvi de la configuració de polvorització:
Locate the spray selector lever or dial on the face of the showerhead. Gently rotate or slide this selector to cycle through the 5 available spray patterns. Each setting provides a unique flow, from a wide, gentle spray to a concentrated, powerful massage.
Ús portàtil:
The 60-inch hose allows for convenient handheld use, making it ideal for rinsing specific areas, cleaning the shower, or bathing children and pets.
Manteniment
Regular maintenance will ensure your Oxygenics showerhead continues to perform optimally and remain clog-free.
Neteja dels broquets:
The easy-clean nozzles are designed to prevent mineral buildup. To clean, simply rub your finger or a soft cloth over the rubber nozzles on the showerhead face while water is flowing. This will dislodge any mineral deposits.
Neteja general:
To clean the exterior of the showerhead and hose, use a soft cloth and mild soap or a non-abrasive bathroom cleaner. Avoid using harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the brushed nickel finish.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Baixa pressió d'aigua | Mineral buildup in nozzles; water restrictor; low household water pressure. | Clean nozzles by rubbing them. Ensure water restrictor (if present and removable per local codes) is not obstructed. Consult a plumber for persistent low household pressure. |
| Fuites a les connexions | Insufficient plumber's tape; loose connection; damaged washer. | Turn off water, re-apply plumber's tape, and hand-tighten connections. Check that rubber washers are properly seated and not damaged. Replace if necessary. |
| Showerhead Clogging | Mineral deposits in nozzles. | Rub the rubber nozzles to dislodge deposits. The "NEVER CLOG!" warranty covers clogging due to mineral buildup. |
Especificacions
- Model: 88446
- Marca: Oxygenics
- Shower Head Type: Portàtil
- Acabat: Níquel raspallat
- Material: Níquel
- Number of Spray Settings: 5
- Caudal: 1.75 GPM (galons per minut)
- Mida de la connexió: 1/2 inch (Standard)
- Longitud de la mànega: 60 polzades
- Dimensions del producte: Approximately 5.4"L x 4.1"W (Showerhead face)
- Pes de l'article: 1.51 lliures
- Estil: Modern
- Característica especial: Oxygenics spray with dual Oxygenics engines
Garantia i Suport
"NEVER CLOG!" Warranty:
Oxygenics showerheads are backed by a "NEVER CLOG!" warranty, providing limited lifetime performance warranty against clogging due to mineral buildup. This ensures your showerhead maintains its optimal spray performance for years to come.
Atenció al client:
For technical assistance, warranty claims, or replacement parts, please contact Oxygenics Customer Support. Refer to the product packaging or the official Oxygenics weblloc web per obtenir la informació de contacte més actualitzada.
Weblloc: www.oxygenics.com
Telèfon: (Check Oxygenics weblloc web per al número de telèfon actual)
