1. Introducció
The OmniMount OC40FM is a full motion articulating TV mount designed for flat panel televisions ranging from 13 to 37 inches and supporting up to 40 pounds. This mount offers versatile viewing options with its tilt, pan, and swivel capabilities. It features a low mounting profile and integrated cable management for a clean installation.
Les característiques clau inclouen:
- Pro de muntatge baixfile: 3.2" (82 mm)
- Tilt, pan, and swivel for maximum viewflexibilitat
- Lift n' Lock system for easy TV attachment
- Extension: Max. 9.5" (240 mm) / Min. 3.2" (82 mm)
- Integrated cable management and plastic covers to conceal wires
- Simple leveling post-installation adjustments
2. Què hi ha a la caixa
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- 13"–37" OmniClassic Full-Motion Mount
- Kit de ferreteria de muntatge (diversos cargols, volanderes, separadors per a TV i fixació a la paret)
- Plantilla d'instal·lació
- Manual d'instruccions (aquest document)
Note: Specific hardware may vary. Refer to the included hardware bag for exact contents.
3. Configuració i instal·lació
Informació important de seguretat: Read all instructions before installation. If you have any questions, contact customer service. Ensure the mounting surface can support the combined weight of the mount and your TV. Professional installation is recommended for optimal safety and performance.
- Prepara la televisió: Attach the TV brackets to the back of your television using the appropriate screws and spacers from the hardware kit. Ensure the brackets are securely fastened and centered.
- Localitza el muntant de la paret: Use a stud finder to locate a suitable wood stud in your desired mounting location. Mark the center of the stud.
- Muntar la placa de paret: Position the wall plate of the mount against the wall, aligning it with the marked stud center. Use a level to ensure it is straight. Mark the pilot hole locations. Drill pilot holes into the stud. Secure the wall plate to the stud using the provided lag bolts and washers.
- Attach TV to Mount: Carefully lift the TV with the attached brackets and hook it onto the wall plate using the Lift n' Lock system. Ensure the TV is securely seated on the mount.
- Televisió segura: Tighten any safety screws or locking mechanisms to prevent accidental dislodging of the TV from the mount.
- Gestió de cables: Route TV cables through the integrated cable management channels and use the plastic covers to conceal them for a tidy appearance.
Figure 3.1: The OmniMount OC40FM mount extended, illustrating its articulating arm and the TV attachment plate.
Figure 3.2: The OmniMount OC40FM mount in its retracted position, demonstrating its low profile Contra la paret.
4. Funcionament de la muntura
The OC40FM mount provides full motion capabilities to optimize your viewing experience. Always handle the TV carefully when adjusting its position.
- Extensió: Gently pull the TV away from the wall to extend the articulating arm. The mount can extend up to 9.5 inches (240 mm).
- Retracció: Push the TV gently back towards the wall until it reaches its minimum profile of 3.2 inches (82 mm).
- Girar: Rotate the TV left or right along the horizontal axis to achieve the desired viewangle de ing.
- Inclinació: Adjust the vertical angle of the TV by tilting it up or down. The maximum tilt angle is 12 degrees. This adjustment is typically secured with a lever or knob on the mount.
- Nivell: The mount allows for simple post-installation leveling adjustments to ensure your TV is perfectly horizontal.
Figura 4.1: Un example of the OmniMount OC40FM in use, showcasing a TV extended and angled for optimal viewing in a room setting.
5. Manteniment
Un manteniment regular garanteix la longevitat i el funcionament segur del suport del televisor.
- Neteja: Netegeu el suport amb un drap suau i sec per eliminar la pols. Per a marques difícils, netegeu lleugeramentamp es pot fer servir un drap i després assecar-lo. Eviteu netejadors o dissolvents abrasius.
- Inspecció periòdica: Annually, or if you notice any changes in performance, inspect all screws and bolts to ensure they are tight. Check for any signs of wear, damage, or corrosion.
- Lubricació: The articulating joints are designed for smooth operation and typically do not require lubrication. If movement becomes stiff, consult customer support.
6. Solució De Problemes
If you encounter issues with your OmniMount OC40FM, refer to the following common solutions:
- El televisor no està anivellat: Use the post-installation leveling adjustment feature to correct the horizontal alignment. Ensure the wall plate was installed level initially.
- La muntura se sent fluixa: Re-check all wall attachment bolts and TV bracket screws. Ensure they are securely tightened. If the issue persists, the wall stud may not be adequately supporting the weight, or the installation was not performed correctly.
- Difficulty adjusting TV position: Ensure no cables are snagged or obstructing movement. Check if any locking mechanisms for tilt or swivel are engaged.
- Peces que falten: If any parts were missing from the box, contact OmniMount customer support for assistance.
7. Especificacions
| Número de model | OC40FM |
| Mides de TV compatibles | 13 - 37 polzades |
| Capacitat màxima de pes | 40 lliures |
| Tipus de muntatge | Moviment complet |
| Tipus de moviment | Fixed/Full Motion |
| Interval d'extensió | Min. 3.2" (82 mm) / Max. 9.5" (240 mm) |
| Angle d'inclinació màxim | 12 graus |
| Material | Metall |
| Color | Negre |
| Dimensions del producte | 12 x 3.2 x 8.2 polzades |
| Pes de l'article | 3.1 lliures |
8. Garantia i Suport
For warranty information or technical support, please refer to the official OmniMount weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el rebut de compra per a reclamacions de garantia.
Informació de contacte: Please visit the OmniMount official weblloc web per obtenir les dades de contacte i els recursos d'assistència més actualitzats.
