1. Introducció
The Vanguard Alta Pro 263AP is a versatile aluminum tripod designed for photographers seeking stability and flexible shooting angles. It features a unique Multi-Angle Central Column (MACC) System and a PH-32 three-way panhead, making it suitable for various photography styles, including macro and special-angle shots.
2. Configuració
Follow these steps to set up your Vanguard Alta Pro 263AP tripod:
- Unfolding the Tripod Legs: Release the leg locks and extend the three-section aluminum alloy legs. The legs can be adjusted to 25, 50, and 80-degree angles for various shooting requirements.
- Ajust de l'angle de les cames: Utilize the quick flip leg locks to secure the legs at your desired angle. The rubber feet with retractable spikes provide stability on different terrains.
- Connectant la càmera: The PH-32 three-way panhead includes a quick release plate (QS-52). Attach this plate to the base of your camera, then slide the camera with the plate onto the panhead until it locks securely.
- Leveling the Tripod: The panhead features three bubble levels to ensure your setup is perfectly level for accurate shots.
Figure 1: Vanguard Alta Pro 263AP Tripod in standard setup with panhead.
Figure 2: Illustration of tripod leg angle adjustments (25°, 50°, 80°).
3. Instruccions de funcionament
3.1 Multi-Angle Central Column (MACC) System
The innovative MACC system allows the central column to move from 0 to 180-degree angles, enabling vertical and horizontal positioning for diverse shots.
- Repositioning the Central Column: Use the Instant Swivel Stop-n-Lock (ISSL) System to quickly and securely reposition the central column in one simple movement.
- Horizontal Shooting: Extend the central column and pivot it horizontally for overhead or low-angle macro photography.
Figure 3: Central column extended horizontally for overhead or macro shots.
Figure 4: Diagram showing the 0 to 180-degree movement of the central column.
3.2 PH-32 Panhead Operation
The PH-32 panhead offers precise pan and tilt functions for smooth camera movements.
- Moviment de panoràmica: Loosen the panning lock to rotate the camera 360 degrees horizontally. Tighten to secure.
- Moviment d'inclinació: Adjust the tilt handle to move the camera vertically (-30° to +90°) and laterally (-60° to +90°).
Figure 5: PH-32 Panhead showing pan and tilt capabilities.
Figure 6: Close-up of the three bubble levels on the panhead for precise leveling.
3.3 Leg Adjustments
The tripod legs offer multiple angle settings and quick extension for adaptability.
- Leg Angle Selectors: Each leg features a selector to set angles at 25°, 50°, or 80° for stability on uneven surfaces or for low-angle shots.
- Bloqueigs ràpids de les potes: Use the quick flip locks to extend or retract leg sections rapidly.
- Rubber Feet with Retractable Spikes: The feet can be used with rubber pads for indoor or smooth surfaces, or with retractable spikes for enhanced grip on soft ground.
Figure 7: Detail of the leg locks and the convertible rubber/spike feet.
4. Manteniment
- Neteja: Wipe down the tripod with a soft, dry cloth after each use. For stubborn dirt, use a damp drap i sabó suau, després assecar-lo bé.
- Lubricació: Periodically check leg locks and moving parts for smooth operation. Apply a small amount of silicone-based lubricant if necessary, avoiding excessive application.
- Emmagatzematge: Store the tripod in a dry, clean environment, preferably in its included tripod bag, to protect it from dust and moisture.
- Inspecció: Regularly inspect all screws, joints, and locks for tightness and wear. Tighten any loose components using the provided tools.
5. Solució De Problemes
- Legs not extending/retracting smoothly: Check for dirt or debris in the leg locks. Clean and apply a small amount of silicone lubricant if needed. Ensure locks are fully disengaged/engaged.
- Panhead movement is stiff or loose: Adjust the tension knobs on the panhead. If still stiff, check for debris. If too loose, ensure all locking mechanisms are fully tightened.
- El trípode és inestable: Ensure all leg sections are fully extended and locked. Verify that the leg angles are set appropriately for the terrain and load. Check that the central column is securely locked.
- Camera not securely attached: Ensure the quick release plate is firmly attached to your camera and properly seated in the panhead's receiver. Confirm the panhead's quick release lever is locked.
6. Especificacions
| Característica | Detall |
|---|---|
| Nom del model | ALTA PRO 263AP |
| Marca | VANGUARDA |
| Material | Alumini |
| Alçada plegada | 28.5 polzades |
| Alçada ampliada | 69.9 polzades |
| Pes de l'article | 5.73 lliures |
| Límit de pes | 11 lliures |
| Seccions de cames | 3 |
| Angles de cames | 25°, 50°, 80° |
| Tipus de capçal de trípode | Pan Heads (PH-32) |
| Característiques especials | Adjustable, Lightweight, Rotatable Central Column |
7. Garantia i Suport
For warranty information and customer support, please visit the official VANGUARD weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el rebut de compra per a reclamacions de garantia.
Online resources and FAQs may also be available on the VANGUARD brand store: VANGUARD Store
8. Vídeos oficials de productes
Vanguard Alta Pro 2+ Series Overview
Aquest vídeo ofereix un finalview of the Vanguard Alta Pro 2+ series, highlighting its innovative features, new materials for stability and lightweight performance, and the multi-angle central column system. It showcases the sleek design, durable foam grips, and adaptable rubber feet for various terrains.
