KYOCERA Ryobi 6832535 Auxiliary Handle Instruction Manual

1. Producte acabatview

The KYOCERA Ryobi 6832535 Auxiliary Handle is designed to enhance control and stability when operating compatible disc grinders. This supplementary handle provides an additional gripping point, allowing for safer and more precise handling during various grinding tasks.

Característiques clau

• Ergonomic design for improved grip and comfort.
• Provides enhanced stability and control during disc grinder operation.
• Construcció duradora per a un ús durador.
• Fàcil de col·locar i desenganxar.

Models compatibles

This auxiliary handle is compatible with the following Ryobi disc grinder models:

• G-1010H
• G-1030
• G-1040
• RG-100
• RG-100H
• G-104P
• G-104PH
• G-104PHS
• G-1021
• G-108HA
• G-1080
• G-1080H

2. Informació important de seguretat

Always prioritize safety when working with power tools. Read and understand the instruction manual for your disc grinder before attaching or using this auxiliary handle. Failure to follow safety instructions can result in serious injury.

• Utilitzeu l'equip de protecció individual (EPI) adequat: This includes safety glasses, hearing protection, gloves, and a dust mask.
• Ensure the handle is securely attached: Before each use, verify that the auxiliary handle is firmly tightened to the grinder.
• Mantingueu una subjecció ferma: Always use both hands to operate the disc grinder when the auxiliary handle is attached, ensuring maximum control.
• Inspeccionar per danys: Before each use, check the handle for any cracks, wear, or damage. Do not use a damaged handle.
• Mantingueu la zona de treball neta: Assegureu-vos que la vostra zona de treball estigui ben il·luminada i lliure de trastos per evitar accidents.
• Desconnecteu l'alimentació: Always disconnect the disc grinder from its power source before attaching, adjusting, or removing the auxiliary handle.

3. Instal·lació i configuració

Follow these steps to properly install the auxiliary handle onto your compatible Ryobi disc grinder:

1. Ensure Power Tool is Off and Unplugged: Before beginning, always ensure your disc grinder is switched off and disconnected from the power supply to prevent accidental startup.
2. Locate the Auxiliary Handle Mounting Point: Identify the threaded hole on the side or top of your disc grinder, specifically designed for an auxiliary handle. Refer to your grinder's manual if unsure.
3. Align the Handle: Take the KYOCERA Ryobi 6832535 Auxiliary Handle and align its threaded shaft with the mounting hole on the grinder.
4. Thread and Tighten: Carefully screw the auxiliary handle into the mounting hole. Turn clockwise until it is hand-tight. Do not overtighten, but ensure it is snug and does not wobble.
5. Verifica la seguretat: Gently pull and twist the handle to confirm it is securely fastened and will not loosen during operation.

4. Instruccions de funcionament

The auxiliary handle is intended to provide additional control and reduce fatigue during prolonged use of your disc grinder. Always operate the grinder with both hands when the auxiliary handle is attached.

• Two-Handed Operation: Grip the main body of the grinder with one hand and the auxiliary handle with the other. This two-handed grip provides superior control and stability, especially during demanding tasks.
• Mantenir l'equilibri: Use the auxiliary handle to balance the weight of the grinder and apply even pressure to the workpiece.
• Ajust de posició: If your grinder allows, the auxiliary handle can often be repositioned to different mounting points (e.g., left or right side) to suit your working angle and handedness. Always disconnect power before adjusting.
• Evitar exagerar: Keep your body in a stable position and avoid overreaching while operating the grinder. The auxiliary handle helps maintain a comfortable and controlled posture.

5. Cura i Manteniment

Proper care and maintenance will extend the life of your auxiliary handle and ensure safe operation.

• Neteja: After each use, wipe the handle clean with a dry cloth to remove dust, debris, and grime. Do not use harsh chemicals or solvents that could damage the material.
• Inspecció: Regularly inspect the handle for any signs of wear, cracks, or damage, particularly around the threaded connection point. If any damage is found, replace the handle immediately.
• Emmagatzematge: Store the auxiliary handle in a clean, dry place, away from direct sunlight and extreme temperatures. If detached from the grinder, keep it with the grinder's accessories to prevent loss.

6. Solució De Problemes

If you encounter issues with your auxiliary handle, refer to the following common problems and solutions:

• Handle feels loose or wobbly:
  • Ensure the handle is fully threaded and tightened securely.
  • Check the threaded hole on the grinder for any debris or damage that might prevent a tight fit.
  • Inspect the handle's threaded shaft for stripped threads. If stripped, the handle needs replacement.
• Handle is difficult to attach:
  • Verify that the handle's threads are clean and free of debris.
  • Ensure you are aligning the handle correctly with the grinder's mounting hole. Do not force it, as this can cross-thread.
  • Confirm that the handle is compatible with your specific grinder model.

7. Especificacions del producte

8. Garantia i Suport

For information regarding the product warranty, please refer to the documentation provided with your original purchase or contact KYOCERA customer support. If you require technical assistance or have questions about the auxiliary handle, please reach out to the manufacturer's authorized service center or customer service department.

La informació de contacte normalment es pot trobar a la pàgina oficial del fabricant weblloc o en els materials d'embalatge.