Introducció
This manual provides essential information for the proper setup, operation, and maintenance of your TeeJet AI11004-VS 110 Degree Air Induction Flat Spray Tip. Understanding these instructions will ensure optimal performance and longevity of the product.
The TeeJet AI11004-VS is designed for broadcast spraying applications, featuring a stainless steel insert and a polymer insert holder with a pre-orifice. Its air induction technology produces large, air-filled droplets, which significantly reduces spray drift. This tip provides a tapered edge flat spray pattern for uniform coverage.
Producte acabatview
The image displays the TeeJet AI11004-VS 110 Degree Air Induction Flat Spray Tip. It is red in color and features a robust design with visible internal components at the top, indicating its precision engineering for spray applications. The model number "AI11004-VS" is clearly printed on the side of the tip.
Característiques principals:
- Air Induction Technology: Produces large, air-filled droplets for reduced drift.
- Tapered Edge Flat Spray Pattern: Ensures uniform coverage.
- Construcció duradora: Features a stainless steel insert and polymer holder.
- Aplicació versàtil: Suitable for various broadcast spraying needs.
- Recommended Pressure Range: 30-115 PSI (2-8 bar).
Configuració i instal·lació
Proper installation is crucial for the optimal performance of your spray tip.
- Inspeccionar components: Before installation, ensure all components of the spray tip are free from damage or debris.
- Preparació del polvoritzador: Ensure your sprayer system is clean and free of any residual chemicals.
- Adjunta un consell: Securely attach the TeeJet AI11004-VS spray tip to your sprayer's nozzle body. For automatic spray alignment, it is recommended to pair it with the 114443A-1-CELR TeeJet Black Cap and Gasket.
- Comproveu les connexions: Verify all connections are tight to prevent leaks during operation.
- Prova inicial d'aigua: Before applying any chemicals, perform a test spray with clean water to check for proper spray pattern and leaks.
Instruccions de funcionament
Follow these guidelines for effective and safe operation of the spray tip.
Configuració de pressió:
The recommended operating pressure range for the TeeJet AI11004-VS is 30-115 PSI (2-8 bar). Operating within this range ensures the best spray pattern and drift reduction.
Application Rate Chart:
This image displays a detailed TeeJet Flat Application Rate Chart. The chart provides data for various TeeJet spray tips, including the AI11004-VS, showing flow rates in GPM (Gallons Per Minute) and nozzle output in OZ/MIN (Ounces Per Minute) at different PSI (Pounds per Square Inch) levels. It also includes application rates in Gallons Per Acre (GPA) and Gallons Per 1000 Square Feet (GPM/1000 SQ FT) based on different MPH (Miles Per Hour) speeds. Users should consult this chart to determine the appropriate pressure and speed for their desired application rate.
Refer to the TeeJet Flat Application Rate Chart to determine the correct pressure and speed for your specific application volume. This chart provides detailed information on flow rates and coverage based on various operating parameters.
Drift Reduction:
The air induction technology of this tip is designed to minimize drift. To further reduce drift, avoid spraying in windy conditions and ensure the spray boom height is appropriate for the application.
Manteniment
Regular maintenance will extend the life of your spray tip and ensure consistent performance.
- Neteja: After each use, thoroughly flush the spray tip with clean water to remove any chemical residues.
- Clog Removal: If the tip becomes clogged, remove it from the sprayer and clean it using a soft brush or compressed air. Do not use metal objects or sharp tools, as this can damage the orifice.
- Emmagatzematge: Store the spray tip in a clean, dry place away from direct sunlight and extreme temperatures.
- Inspecció: Periodically inspect the tip for wear, damage, or blockages. Replace the tip if the spray pattern becomes uneven or flow rate is inconsistent.
Resolució de problemes
Problemes comuns i les seves solucions:
| Problema | Causa possible | Solució |
|---|---|---|
| Patró de polvorització desigual | Partially clogged orifice; Worn tip; Incorrect pressure. | Clean the tip; Replace the tip; Adjust pressure to recommended range. |
| Caudal reduït | Clogged tip or filter; Low pump pressure. | Clean the tip and system filters; Check pump and pressure regulator. |
| Excessive Drift | Too high pressure; Spraying in windy conditions; Incorrect boom height. | Reduce pressure; Avoid spraying in high winds; Adjust boom height. |
| Fuita a la connexió | Loose connection; Damaged gasket or O-ring. | Tighten connection; Replace gasket or O-ring. |
Especificacions
| Atribut | Detall |
|---|---|
| Número de model | AI11004-VS |
| Marca | TeeJet |
| Material | Acer inoxidable |
| Angle de polvorització | 110 graus |
| Patró de polvorització | Tapered Edge Flat Spray |
| Pressió de funcionament recomanada | 30-115 PSI (2-8 bar) |
| Dimensions (L x A x A) | 0.63 x 0.63 x 1.75 polzades |
| Pes | 0.16 unces |
| Mida de la connexió d'entrada | 0.63 polzades |
| Tipus de connexió d'entrada | Barb |
| Mida de connexió de presa | 0.63 polzades |
| Tipus de connexió de presa | Barb |
Contacte i Suport
For further assistance or inquiries regarding your TeeJet AI11004-VS spray tip, please contact TeeJet customer support or visit their official weblloc.
Note: Warranty information is typically provided with the product packaging or available on the manufacturer's official weblloc.
