Manual d'usuari del llum de inundació per a paisatges RAB Lighting LFP38A

1. Introducció

This manual provides detailed instructions for the safe installation, operation, and maintenance of the RAB Lighting LFP38A Landscape Flood Light Fixture. Please read this manual thoroughly before installation and retain it for future reference.

The RAB Lighting LFP38A is a durable outdoor flood light fixture designed for landscape illumination. It accommodates a 150-watt maximum PAR38 bulb and operates on a 120-volt electrical system.

2. Informació de seguretat

ADVERTÈNCIA: Risc de descàrrega elèctrica. Desconnecteu l'alimentació abans de la instal·lació o el manteniment.

• Ensure the power supply is turned off at the circuit breaker before beginning any work.
• All wiring must be in accordance with national and local electrical codes. If you are unsure about wiring, consult a qualified electrician.
• No supereu la potència màximatage specified for the bulb (150-watt PAR38).
• This fixture is designed for outdoor use and is water-resistant. However, ensure all connections are properly sealed to prevent water intrusion.
• Do not operate the fixture with a damaged cord or if the housing is compromised.
• Allow the bulb to cool completely before attempting to replace it.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de continuar amb la instal·lació:

• RAB Lighting LFP38A Flood Light Fixture (1 unit)
• Mounting hardware (if applicable, typically included with the fixture)
• Manual d'instruccions (aquest document)

Note: Bulb is not typically included and must be purchased separately.

4. Configuració i instal·lació

Follow these steps for proper installation of your RAB Lighting LFP38A fixture:

4.1 Eines necessàries

• Tornavís
• Pelacables
• Alicates
• Electrical tape (optional, for added insulation)
• Weatherproof sealant (optional, for outdoor connections)

4.2 Muntatge de l'aparell

The LFP38A fixture features a 1/2 Inch NPS Threaded Locking Swivel Arm for versatile mounting. This allows for precise aiming of the light.

Image: Detail of the 1/2 inch NPS threaded locking swivel arm, indicating its adjustability and connection point.

1. Apagueu l'alimentació: Locate the circuit breaker controlling the outdoor lighting circuit and switch it to the OFF position. Verify power is off using a voltage provador.
2. Preparació de la superfície de muntatge: Ensure the mounting surface is stable and can support the fixture.
3. Attach mounting arm: Secure the 1/2 inch NPS threaded swivel arm to a junction box or appropriate mounting accessory. Ensure a watertight seal for outdoor applications.
4. Connexions de cable: Connect the fixture's wires to the main power supply wires. Typically, this involves connecting black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground). Use approved wire connectors.
5. Connexions segures: Ensure all wire connections are tight and properly insulated. For outdoor use, consider using weatherproof wire nuts and sealing the junction box.
6. Install bulb: Carefully screw a PAR38 or PAR20 bulb (up to 150 watts) into the fixture's socket. Do not overtighten.

Image: The RAB Lighting LFP38A fixture, ready for installation.

Image: The flood light fixture installed and illuminating an area, highlighting its ease of installation.

5. Instruccions de funcionament

Once the RAB Lighting LFP38A fixture is securely installed and wired:

1. Restaura l'alimentació: Gireu l'interruptor de circuit de nou a la posició ON.
2. Prova de funcionament: The light should illuminate.
3. Ajustar l'objectiu: Loosen the locking swivel arm, adjust the fixture to the desired angle for optimal illumination, and then tighten the swivel arm to secure its position. The fixture allows for 180-degree adjustment.

Image: An illustration demonstrating the 180-degree rotational capability of the fixture's mounting arm for precise light direction.

6. Manteniment

Regular maintenance ensures optimal performance and longevity of your flood light fixture.

• Neteja: Netegeu periòdicament l'aparell amb un drap suau iamp drap. No utilitzeu productes de neteja abrasius ni dissolvents. Assegureu-vos que l'alimentació estigui apagada abans de netejar.
• Substitució de bombetes:
  1. Apagueu l'alimentació a l'interruptor.
  2. Allow the old bulb to cool completely.
  3. Desenrosqueu amb cura la bombeta antiga.
  4. Screw in a new PAR38 or PAR20 bulb (max 150 watts) into the socket.
  5. Restaura l'alimentació i prova.
• Inspecció: Annually inspect the wiring and housing for any signs of wear, damage, or corrosion. Address any issues promptly.

Image: The fixture is designed to withstand various outdoor weather conditions, including sun, rain, and snow.

7. Solució De Problemes

If your RAB Lighting LFP38A fixture is not functioning as expected, consider the following common issues:

If troubleshooting steps do not resolve the issue, contact RAB Lighting customer support.

8. Especificacions

9. Informació de la garantia

This RAB Lighting LFP38A fixture is covered by a Garantia del fabricant de 1 anys from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications.

For warranty claims or further details, please contact RAB Lighting customer support.

10. Atenció al client

For technical assistance, replacement parts, or warranty inquiries, please contact RAB Lighting directly.

Visit the official RAB Lighting weblloc web per obtenir informació de contacte i recursos addicionals: www.rablighting.com