Manual d'usuari del punt d'accés sense fil N600 de doble banda EnGenius ECB600

1. Introducció

The EnGenius ECB600 is a high-performance Dual-Band Wireless N600 Indoor Access Point and Client Bridge designed to provide robust and extended wireless coverage. It operates on both 2.4 GHz and 5 GHz frequency bands, offering up to 300 Mbps throughput on each band for a combined 600 Mbps. Key features include high power output for long-range coverage, SSID-to-VLAN tagging for network segmentation, and Power over Ethernet (PoE) compatibility for flexible deployment.

2. Contingut del paquet

• EnGenius ECB600 Dual-Band Wireless N600 Indoor Access Point / Client Bridge
• Adaptador d'alimentació (si no feu servir PoE)
• Cable Ethernet
• Guia d'instal·lació ràpida

3. Sobrecàrrega físicaview

Familiarize yourself with the device's ports and indicators before installation.

Figura 1: EnGenius ECB600 Access Point showing the device from an angle, highlighting the four external antennas, the EnGenius logo on top, and the DC-IN, LAN, and Reset ports on the rear panel.

3.1. Ports i botons del panell posterior

• Port DC-IN: Connects to the included power adapter for power supply.
• Port LAN: Connects to your network switch or router. This port also supports Power over Ethernet (PoE) for power and data transmission.
• Botó de restabliment: Used to reset the device to factory default settings. Press and hold for approximately 10 seconds while the device is powered on.

3.2. Indicadors LED

El panell frontal inclou indicadors LED que proporcionen informació d'estat:

• LED d'alimentació: Indica l'estat d'alimentació.
• LED LAN: Indica activitat al port LAN.
• LED de 2.4 GHz: Indicates 2.4 GHz wireless activity.
• LED de 5 GHz: Indicates 5 GHz wireless activity.

4. Configuració i instal·lació

4.1. Attaching Antennas

Carefully screw the four external omni-directional antennas onto the corresponding connectors on the device. Ensure they are securely fastened but do not overtighten.

4.2. Alimentació del dispositiu

The ECB600 can be powered using one of two methods:

1. Adaptador d'alimentació: Connect the included power adapter to the DC-IN port and plug it into a standard electrical outlet.
2. Alimentació per Ethernet (PoE): If using a PoE-enabled switch or injector (IEEE 802.3at/af compliant), connect an Ethernet cable from the PoE source to the LAN port on the ECB600. No separate power adapter is needed in this configuration.

4.3. Connexió a la xarxa

Connect an Ethernet cable from your network switch or router to the LAN port on the ECB600. This provides the data connection for the access point.

4.4. Configuració Inicial

To configure the ECB600, you can use a web browser or the EnGenius EZ Controller software:

• Web Navegador: Connect a computer to the same network as the ECB600. Open a web browser and enter the device's default IP address (refer to the Quick Installation Guide for the default IP). Log in with the default credentials to access the configuration interface.
• EZ Controller Software: Download and install the EnGenius EZ Controller software from the EnGenius website. This software allows for centralized monitoring and management of multiple EnGenius access points.

During initial setup, it is recommended to:

• Change the default administrator password.
• Configure the SSID (Wi-Fi network name) and security settings (WPA2-PSK recommended).
• Adjust channel frequencies to avoid interference, especially in congested environments.

5. Funcionament del dispositiu

5.1. Dual-Band Operation

The ECB600 supports simultaneous operation on both 2.4 GHz and 5 GHz bands. This allows for greater flexibility and performance:

• Banda de 2.4 GHz: Offers wider coverage and better penetration through obstacles, suitable for general internet browsing and devices further away.
• Banda de 5 GHz: Provides higher speeds and less interference, ideal for bandwidth-intensive applications like video streaming and online gaming, especially for devices closer to the access point.

You can configure separate SSIDs for each band or use a single SSID with band steering enabled (if supported by your firmware) to allow devices to automatically connect to the optimal band.

5.2. SSID-to-VLAN Tagging

The ECB600 supports up to eight SSIDs (four per frequency band), each of which can be tagged to a specific VLAN. This feature allows for network segmentation, enabling different user groups (e.g., guests, employees, IoT devices) to have separate access rights and network resources, enhancing security and network management.

5.3. High Power and Long-Range Coverage

With high RF transmit power (29 dBm for 2.4 GHz, 26 dBm for 5 GHz), the ECB600 provides extended wireless coverage, reducing dead zones and improving signal strength across larger areas.

6. Manteniment

6.1. Actualitzacions de firmware

Regularly check the EnGenius website for the latest firmware updates. Firmware updates can improve performance, add new features, and address security vulnerabilities. Follow the instructions provided with the firmware download for the update process.

6.2. Restabliment dels valors predeterminats de fàbrica

If you encounter persistent issues or forget your login credentials, you can reset the device to its factory default settings. With the device powered on, use a paperclip or similar pointed object to press and hold the Reset button for approximately 10 seconds. The device will restart with default settings.

6.3. Neteja

Keep the device clean and free from dust. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.

7. Solució De Problemes

7.1. Sense poder

• Ensure the power adapter is securely connected to the DC-IN port and a working electrical outlet.
• If using PoE, verify that the Ethernet cable is connected to a PoE-enabled port on your switch/injector and that the PoE source is active.
• Check the Power LED on the device. If it is off, try a different power source or adapter.

7.2. No es pot connectar a la Wi-Fi

• Verify that the 2.4 GHz and 5 GHz LEDs are active, indicating wireless functionality.
• Ensure your device is within range of the access point.
• Check that you are selecting the correct SSID and entering the correct Wi-Fi password.
• Restart the access point and your client device.

7.3. Slow Wireless Performance

• Ensure the access point is placed in a central location, away from obstructions and sources of interference (e.g., microwaves, cordless phones).
• Check for overlapping Wi-Fi channels in your area using a Wi-Fi analyzer tool. Adjust the channel settings in the ECB600's configuration to a less congested channel.
• Ensure your client devices support 802.11n and are connecting to the appropriate band (5 GHz for higher speeds).
• Update the firmware of the ECB600 to the latest version.

7.4. Device Unresponsive or Locking Up

• Perform a soft reboot by unplugging and replugging the power.
• If the issue persists, consider performing a factory reset (see Section 6.2) and reconfiguring the device.
• Ensure the device has adequate ventilation to prevent overheating.
• Verify that the firmware is up to date.

8. Especificacions

9. Garantia i Suport

For warranty information and technical support, please refer to the documentation included with your product or visit the official EnGenius Technologies website. The manufacturer provides resources for product registration, driver downloads, and customer service inquiries.

Tecnologies EnGenius Weblloc: www.engeniustech.com