Manual d'usuari de recanvi del comandament a distància Viper 7345V

Producte acabatview

The Viper 7345V is a premium LCD 2-way remote designed as an additional or replacement remote for compatible Viper security and remote start systems. It offers up to 1/4 mile range and provides visual and audible confirmation of commands.

Característiques clau

• 2-Way communication with up to 1/4 mile range.
• LCD display for visual feedback and system status.
• 4-Button control for various functions (Lock, Unlock, AUX, Remote Start).
• Provides visual and audible confirmation when commands are sent successfully.
• Priority icons map for simple and clear vehicle monitoring.
• Compatible with Viper Systems: 4305V, 3305V, 5305V.

Figura 1: Frontal view of the Viper 7345V 2-Way LCD Remote Control, showing the LCD screen and four control buttons (Lock, Unlock, AUX, and Remote Start).

Figura 2: Angle view of the Viper 7345V 2-Way LCD Remote Control, highlighting its ergonomic design and button layout.

Setup: Programming Your Remote

To program your new Viper 7345V remote control to your existing Viper system, follow these steps carefully. Ensure the system's Valet/Program switch is plugged into the BLUE port before beginning.

1. Porta: Open a vehicle door.
2. Clau: Turn the vehicle's ignition key to the ON position.
3. Tria el canal: Within 5 seconds, press and release the Valet/Program button the number of times corresponding to the desired channel (see table below). After selecting the channel, press the Valet/Program button once more and hold it. The system's LED will flash the same number of times as the selected channel, and the siren will chirp to confirm the selection. DO NOT release the Valet/Program button yet.
4. Transmetre: While still holding the Valet/Program button, press the desired button on the new transmitter (remote control). The unit will chirp to confirm that the transmitter has been successfully programmed to the receiver.
5. Alliberament: Once the code is learned, you may release the Valet/Program button and remove the ignition key.

Transmitter Channel Selection:

Note: For detailed transmitter operation and auto-learn configurations, refer to your Viper system's owner's guide.

Operating Instructions: Remote Control Functions

The Viper 7345V remote features four primary buttons and an LCD screen to provide comprehensive control and feedback for your vehicle's security system.

• Botó de bloqueig (🔒): Press to arm your vehicle's security system and lock the doors. The LCD will display a locked icon and provide confirmation.
• Botó de desbloqueig (🔓): Press to disarm your vehicle's security system and unlock the doors. The LCD will display an unlocked icon and provide confirmation.
• Botó AUX: This button controls auxiliary functions, which may vary depending on your system's installation. Common uses include trunk release or other custom features. Refer to your system's owner's guide for specific AUX function details.
• Remote Start/Star Button (✱): Press and hold to remotely start your vehicle (if equipped with remote start). The LCD will show engine status and provide confirmation.
• Pantalla LCD: The LCD screen provides visual feedback on the vehicle's status, including door lock status, alarm armed/disarmed status, remote start status, and battery level.

Maintenance: Battery Replacement

The Viper 7345V remote control is powered by one AAA battery. When the battery level is low, the LCD display may dim or the remote's range may decrease. Replace the battery as follows:

1. Localitza la tapa del compartiment de les piles a la part posterior del comandament a distància.
2. Carefully open the cover using a small flat-head screwdriver or a coin if necessary.
3. Traieu la pila AAA antiga.
4. Insert a new AAA battery, ensuring correct polarity (+ and -).
5. Col·loqueu la coberta del compartiment de la bateria amb seguretat.

Nota: Desfeu-vos de les piles velles de manera responsable d'acord amb la normativa local.

Resolució de problemes

If you experience issues with your Viper 7345V remote, consider the following common solutions:

• El comandament a distància no respon:
  • Check the remote's battery and replace if necessary.
  • Ensure you are within the operating range of the vehicle's system.
  • Verify that the vehicle's security system is powered and functioning correctly.
• Abast reduït:
  • Substitueix la pila del comandament a distància.
  • Environmental factors (e.g., large buildings, radio interference) can affect range. Try operating the remote in a different location.
• Problemes de la pantalla LCD:
  • If the display is dim or blank, replace the battery.
  • Ensure the remote has not been exposed to extreme temperatures or moisture.
• Remote Not Programming:
  • Double-check all steps in the "Programming Your Remote" section.
  • Ensure the Valet/Program switch is correctly connected and functioning.
  • Confirm compatibility with your specific Viper system model (4305V, 3305V, 5305V).

If problems persist after attempting these solutions, contact Viper customer support or a certified installer.

Especificacions tècniques

Garantia i Suport

For specific warranty details and terms, please refer to the documentation included with your original Viper security or remote start system, or visit the official Viper weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.

If you require technical assistance, have questions about your product, or need to troubleshoot further, please contact Viper customer support. Contact information can typically be found on the Viper website or in your system's original manual.

També podeu visitar el Botiga Viper a Amazon per obtenir informació i recursos addicionals sobre el producte.