1. Introducció
This user manual provides detailed instructions for the installation, operation, and maintenance of the Schellenberg Mini Standard 20110 Tubular Motor 10 Nm. This motor is designed for integration into standard roller shutter shafts, offering an efficient and durable solution for controlling roller shutters.
The motor is suitable for controlling shutters from multiple locations or operating multiple shutters simultaneously (group control). It comes ready for assembly with an adapter and wall bracket, and features mechanical end-point adjustment using colored screws.
2. Instruccions de seguretat
Observeu sempre les següents precaucions de seguretat per evitar lesions o danys al producte:
- La instal·lació ha de ser realitzada per un electricista qualificat d'acord amb les normes elèctriques locals.
- Desconnecteu l'alimentació abans de realitzar qualsevol instal·lació, manteniment o resolució de problemes.
- Ensure the motor is correctly sized for your roller shutter. Refer to specifications for maximum shutter surface area and traction.
- Do not expose the motor to moisture or extreme temperatures beyond its IP44 rating.
- Keep children and pets away from the operating area of the roller shutter.
- Do not attempt to open or repair the motor yourself. Contact qualified service personnel.
3. Què hi ha a la caixa
En desembalar, comproveu que hi hagi tots els components:
- 1 x Schellenberg Mini Standard 20110 Tubular Motor 10 Nm with cable
- 1 x conjunt d'adaptadors
- 1 x Wall bearing
Figure 3.1: Contents of the product package, showing the tubular motor, adapter set, and wall bearing components.
4. Configuració i instal·lació
The Schellenberg Mini Standard 20110 Tubular Motor is designed for direct mounting within a 60 mm octagonal roller shutter shaft.
4.1. Comprovacions prèvies a la instal·lació
- Ensure the roller shutter shaft is clean and free of obstructions.
- Verify the shaft diameter is 60 mm.
- Confirm the power supply is disconnected before beginning installation.
4.2. Motor Preparation
Attach the appropriate adapter from the adapter set to the motor head. The adapter ensures optimal power transfer to the shaft.
Figure 4.1: End of the tubular motor with the adjustment points for setting limits.
4.3. Muntatge del motor
- Insert the prepared motor into the 60 mm octageix onal.
- Secure the motor within the shaft using the provided wall bearing.
- Ensure the motor is firmly seated and aligned correctly.
Figure 4.2: The tubular motor positioned inside a roller shutter shaft, ready for final adjustments.
4.4. Connexió elèctrica
Connect the motor to the power supply according to the wiring diagram provided in the full installation guide (not included in this manual, refer to product packaging or manufacturer's website for detailed wiring instructions). Ensure all connections are secure and insulated.
4.5. End-Point Adjustment
The motor features mechanical end-point adjustment using colored screws (yellow and white) located on the motor head. These screws allow you to set the upper and lower limits of the roller shutter's travel.
- Aplica energia al motor.
- Use a suitable tool (e.g., the provided adjustment tool) to turn the colored screws.
- Turn the yellow screw to adjust one end point (e.g., fully open).
- Turn the white screw to adjust the other end point (e.g., fully closed).
- Test the travel of the roller shutter to ensure the limits are set correctly and the shutter stops precisely at the desired positions.
Figure 4.3: Adjusting the mechanical end points of the tubular motor using the provided tool.
5. Operating the Motor
Once installed and the end points are set, the motor can be operated via a connected switch or control system (not included). The motor operates in an ON-OFF-ON mode.
- Moviment ascendent: Activate the 'Up' control. The motor will run until the upper end point is reached or the control is released.
- Moviment cap avall: Activate the 'Down' control. The motor will run until the lower end point is reached or the control is released.
- Atura: Release the control or activate the 'Stop' function if available on your control system.
For multi-location or group control, ensure your control system is compatible with tubular motors and wired correctly.
6. Manteniment
The Schellenberg Mini Standard 20110 Tubular Motor is designed for minimal maintenance. However, regular checks can ensure optimal performance and longevity.
- Inspecció anual: Periodically check the roller shutter for smooth operation. Ensure there are no obstructions in the path of the shutter.
- Neteja: Keep the area around the motor and shaft clean from dust and debris. Do not use abrasive cleaners or solvents.
- Connexions elèctriques: Annually inspect electrical connections for any signs of wear or loosening. Ensure power is disconnected before inspection.
- Lubricació: El motor ve lubricat de fàbrica i no requereix lubricació addicional.
If you notice any unusual noises, erratic operation, or failure to respond, refer to the Troubleshooting section or contact customer support.
7. Solució De Problemes
This section addresses common issues you might encounter with your tubular motor.
| Problema | Causa possible | Solució |
|---|---|---|
| El motor no respon. | Sense subministrament d'alimentació; Cablejat solt; Interruptor defectuós. | Check power supply and circuit breaker. Inspect all wiring connections. Test the control switch. |
| Shutter stops before reaching end points. | End points incorrectly set; Obstruction in shutter path. | Re-adjust the mechanical end points (refer to Section 4.5). Check for and remove any obstructions. |
| El motor fa un soroll estrany. | Shaft misalignment; Internal motor issue. | Check shaft alignment. If noise persists, contact customer support. |
| Shutter moves slowly or with difficulty. | Excessive friction; Shutter too heavy for motor. | Ensure shutter guides are clean and lubricated. Verify shutter weight is within motor's capacity (max 25 kg). |
If the problem persists after attempting these solutions, please contact Schellenberg customer support.
8. Especificacions
Detailed technical specifications for the Schellenberg Mini Standard 20110 Tubular Motor:
- Número de model: 20110
- Parell: 10 Nm
- Maximum Traction: 25 kg
- Maximum Shutter Surface Area: 6.0 m²
- Mode de funcionament: ON-OFF-ON
- Vol. Operatiutage: 230 Volts
- Valoració actual: 0.53 Amps
- End Point Adjustment: Mechanical, color adjustment (yellow and white screws)
- Compatibilitat de l'eix: 60 mm octagonal shafts
- Dimensions del producte: 22.83 x 4.13 x 2.95 polzades (58 x 10.5 x 7.5 cm)
- Pes de l'article: 4.45 lliures (2.02 kg)
- Classificació de protecció internacional: IP44 (Protection against solid objects over 1mm and splashing water from any direction)
- Material de contacte: coure
- Fabricant: Alfred Schellenberg GmbH
- Primera data disponible: 15 d'agost de 2013
Figure 8.1: Dimensions of the Schellenberg Mini Standard 20110 Tubular Motor.
9. Garantia i Suport
Schellenberg products are manufactured to high quality standards. For warranty information, please refer to the documentation included with your purchase or visit the official Schellenberg website. The manufacturer is Alfred Schellenberg GmbH.
For technical support, troubleshooting assistance beyond this manual, or spare parts, please contact Schellenberg customer service. Contact details can typically be found on the manufacturer's weblloc o embalatge del producte.
Fabricant: Alfred Schellenberg GmbH
Weblloc: www.schellenberg.de (Please note: This is a general example, real website may vary by region.)
