Frigidaire 137108000 Drain Pump Instruction Manual

1. Introducció

This manual provides essential information for the proper installation, operation, and maintenance of your Frigidaire 137108000 Drain Pump. This genuine replacement part is designed for use in washing machines to effectively remove water during the drain cycle. Please read these instructions carefully before proceeding with installation or any service to ensure safe and correct usage.

2. Informació de seguretat

ADVERTIMENT: To reduce the risk of electric shock, fire, or injury to persons, read all instructions before installing or servicing this appliance part.

• Always disconnect the appliance from the power supply before attempting any installation, repair, or maintenance.
• Utilitzeu equips de protecció personal adequats, com ara guants i ulleres de seguretat.
• Ensure all water lines are shut off and any residual water is drained before beginning work.
• Si teniu dubtes sobre alguna part del procés d'instal·lació, consulteu un tècnic qualificat.
• Mantenir els nens i les mascotes lluny de la zona de treball.

3. Producte acabatview

The Frigidaire 137108000 Drain Pump is a critical component for your washing machine's drainage system. It is responsible for pumping water out of the wash tub during the drain and spin cycles.

Figura 1: Davant view of the Frigidaire 137108000 Drain Pump. This image shows the main body and the inlet/outlet ports of the pump.

Figura 2: lateral view of the Frigidaire 137108000 Drain Pump. This view highlights the motor housing and electrical connections.

4. Instal·lació

This section outlines the general steps for replacing a washing machine drain pump. Specific steps may vary depending on your washing machine model. Refer to your appliance's service manual for detailed instructions.

Eines necessàries:

• Alicates de bloqueig de canal
• Stubby screwdriver or small socket wrench set
• Bucket or shallow pan for draining water
• Tovalloles
• New screw-type hose clamps (recommended over spring clamps for easier installation and better seal)

Passos d'instal·lació:

1. Desconnecteu l'alimentació: Desendolleu la rentadora de la presa de corrent.
2. Tancament del subministrament d'aigua: Turn off the hot and cold water supply valves to the washer.
3. Escorreu l'aigua residual: Place a bucket or shallow pan under the drain hose and lower the hose to drain any remaining water from the tub.
4. Accés a la bomba: Depending on your washer model, you may need to remove the front panel, rear panel, or tilt the machine back to access the drain pump.
5. Desconnectar les mànegues: Use channel lock pliers to loosen and remove the hose clamps securing the inlet and outlet hoses to the old drain pump. Be prepared for some water spillage.
6. Desconnecteu el cablejat: Carefully disconnect the electrical wiring harness from the old pump. Note the orientation if necessary.
7. Treure la bomba antiga: Unscrew any mounting screws or release clips holding the old pump in place and remove it.
8. Instal·lar una bomba nova: Position the new Frigidaire 137108000 Drain Pump in the same location and secure it with the mounting screws or clips.
9. Reconnectar les mànegues: Attach the inlet and outlet hoses to the new pump. Secure them tightly with new screw-type hose clamps per evitar fuites.
10. Reconnectar el cablejat: Connect the electrical wiring harness to the new pump.
11. Torneu a muntar la rentadora: Reattach any panels removed during access.
12. Prova de funcionament: Turn on the water supply, plug in the washing machine, and run a short drain or rinse cycle to check for proper function and leaks.

5. Funcionament

The Frigidaire 137108000 Drain Pump operates automatically as part of your washing machine's cycle. When the washer enters a drain or spin phase, the control board activates the pump to remove water from the wash tub. No manual intervention is required for its normal operation.

6. Manteniment

Un manteniment regular pot allargar la vida útil de la bomba de desguàs i prevenir problemes comuns.

• Comproveu si hi ha deixalles: Periodically inspect the drain pump filter (if accessible on your washer model) and the pump's impeller for lint, coins, socks, or other foreign objects that can obstruct flow or damage the pump.
• Clean Drain Hose: If drainage issues occur, consider purging or cleaning the drain hose to remove any blockages.
• Inspeccionar les mànegues: Check the inlet and outlet hoses connected to the pump for cracks, kinks, or loose connections that could lead to leaks.

7. Solució De Problemes

If you experience problems with your washing machine's drainage, the following troubleshooting steps may help.

Problemes comuns i solucions:

• Washer Not Draining:
  • Assegureu-vos que la mànega de desguàs no estigui doblegada ni obstruïda.
  • Check the pump filter for obstructions.
  • Verify that the pump is receiving electrical power.
  • The pump impeller may be damaged or seized.
• Funcionament sorollós:
  • A new pump may operate with a slightly different sound than an old, failing pump. This is often normal.
  • Excessive noise could indicate debris caught in the impeller or a worn motor bearing. Disconnect power and inspect.
• Leaks Around Pump:
  • Check all hose connections to ensure they are tight and properly sealed, especially if new screw-type hose clamps were not used or tightened sufficiently.
  • Inspect the pump housing for cracks or damage.

If these steps do not resolve the issue, it may be necessary to consult a qualified appliance repair technician.

8. Especificacions

9. Garantia i Suport

This Frigidaire genuine replacement part is covered by the manufacturer's standard warranty. For specific warranty details, claims, or technical support, please refer to the documentation provided with your original appliance or visit the official Frigidaire weblloc web. Conserveu el rebut de compra com a comprovant de compra a efectes de garantia.

For further assistance, you may contact Frigidaire customer service through their official channels.