One Control OC10 Crocodile Tail Loop Programmable Looper User Manual

1. Introducció

The One Control OC10 Crocodile Tail Loop is a highly versatile programmable looper designed for guitar effects pedalboards. It allows musicians to create complex signal chains and recall them instantly, enhancing performance flexibility and sound management.

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your OC10 Crocodile Tail Loop.

2. Característiques clau

10 Switchable Effects Loops: Provides extensive options for pedalboard configuration.
Series and Independent Loops: Loops 1-7 operate in series from a single main input, while loops 8, 9, and 10 feature independent external inputs for advanced routing.
Mode directe: Allows individual toggling of loops via dedicated footswitches.
Integració MIDI: Enables control and synchronization with MIDI-compatible devices.
Disseny compacte: Optimized for pedalboard space efficiency.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

One Control OC10 Crocodile Tail Loop Unit
Power Adapter (if included in bundle)
4 x Patch Cables (as per bundle description)
Manual d'usuari (aquest document)

One Control OC10 Crocodile Tail Loop with included cables

Figura 3.1: Frontal view of the One Control OC10 Crocodile Tail Loop with included patch cables. The unit is black with silver footswitches and a central silver handle. Two short patch cables and two longer patch cables are visible above the unit.

4. Configuració i connexions

Proper connection of the OC10 is crucial for optimal performance. Follow these steps to integrate the looper into your setup.

4.1 Connexió d'alimentació

Connect the appropriate 9V DC power adapter (center negative) to the "9V IN" jack on the rear panel of the OC10. Ensure the power source meets the specified voltage i requisits actuals.

4.2 Connexions d'àudio

The OC10 features multiple input and output jacks for flexible routing.

posterior view of One Control OC10 Crocodile Tail Loop showing all input and output jacks

Figure 4.1: Rear panel of the One Control OC10 Crocodile Tail Loop, displaying various input, output, send, and return jacks for effects loops, MIDI IN/OUT/THRU, and power input.

Entrada principal: Connect your guitar or the output of your first pedal to the "IN" jack.
Sortida principal: Connect the "OUT-1" jack to your amplifier's input or the next device in your signal chain.
Effects Loops (1-7): For each loop, connect the "SEND" jack to the input of your effect pedal and the "RETURN" jack to the output of the same pedal. These loops are in series.
Independent Loops (8, 9, 10): These loops have dedicated "IN" and "OUT" jacks (e.g., IN8, OUT8). Use these for effects that require a separate input or for parallel routing.
Sortida del sintonitzador: Connect your tuner to the "TUNER" jack. This output is buffered.

4.3 Connexions MIDI

The OC10 supports MIDI for advanced control and integration with other MIDI-enabled devices.

MIDI IN: Connect a MIDI controller or interface here to send program change (PC) or control change (CC) messages to the OC10.
MIDI OUT/THRU: Use "MIDI OUT" to send MIDI messages generated by the OC10. "MIDI THRU" passes incoming MIDI data directly to another device.

5. Instruccions de funcionament

The OC10 offers various modes of operation to suit different performance needs.

A dalt view of One Control OC10 Crocodile Tail Loop showing footswitches and control buttons

Figure 5.1: Top panel of the One Control OC10 Crocodile Tail Loop, highlighting the footswitches for program selection and bank changes, along with the smaller control buttons for programming and MIDI settings.

5.1 Mode de programa

In Program Mode, you can store and recall combinations of activated effects loops. Each program saves the on/off state of all 10 loops.

Selecció de programes: Use the footswitches labeled PGM1/L1 through PGM7/L7 to select a stored program. The active program's LED will illuminate.
Changing Banks: Use the "BANK UP/L8" and "BANK DN/L9" footswitches to navigate through different banks of programs.
Storing Programs:
1. Activate or deactivate the desired loops using the small buttons above the footswitches (or in Direct Mode).
2. Press and hold the footswitch where you want to save the program until its LED flashes, indicating successful storage.

5.2 Direct Mode

Direct Mode allows you to individually toggle each of the 10 effects loops on or off in real-time, without recalling a stored program.

Activating Direct Mode: Press the "DIRECT" button (usually near the tuner output switch). The "DIRECT" LED will illuminate.
Toggling Loops: In Direct Mode, each footswitch (PGM1/L1 to PGM7/L7, BANK UP/L8, BANK DN/L9, TUNER/L10) directly controls its corresponding loop. Press the footswitch to toggle the loop on or off.

5.3 Operació MIDI

The OC10 can send and receive MIDI Program Change (PC) and Control Change (CC) messages.

Receiving PC Messages: The OC10 can be configured to switch programs based on incoming MIDI PC messages. Refer to the detailed MIDI section in the full manual for mapping.
Sending PC/CC Messages: The OC10 can be programmed to send MIDI PC or CC messages when a program is recalled or a loop is toggled. This allows it to control other MIDI-compatible devices in your setup.

6. Manteniment

To ensure the longevity and optimal performance of your OC10 Crocodile Tail Loop, follow these maintenance guidelines:

Neteja: Use a soft, dry cloth to wipe down the unit. Avoid abrasive cleaners or solvents.
Emmagatzematge: Guardeu la unitat en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
Connexions: Periodically check all cable connections for secure fit and signs of wear. Loose connections can cause signal loss or noise.
Font d'alimentació: Always use the specified power supply. Incorrect voltagLa polaritat o el voltatge poden danyar la unitat.

7. Solució De Problemes

If you encounter issues with your OC10, refer to the following common problems and solutions:

Problema	Causa possible	Solució
Sense alimentació/La unitat no s'encén	Incorrect power supply; Loose power connection; Faulty outlet	Ensure correct 9V DC (center negative) power supply is used. Check power cable connection. Test outlet with another device.
No sound/Signal loss	Incorrect cable connections; Faulty cables; Loop not activated; Buffer issue	Verify all audio cables are correctly connected to IN/OUT/SEND/RETURN jacks. Test cables. Ensure the desired loop is active in Program or Direct Mode. Check buffer settings.
Zum o soroll	Ground loop; Faulty power supply; Interference from other devices	Use isolated power supply for pedals. Ensure proper grounding. Move unit away from power transformers or noisy electronics.
Programs not saving	Incorrect saving procedure	Ensure you press and hold the target footswitch until the LED flashes to confirm saving.

If the problem persists after trying these solutions, please contact One Control customer support.

8. Especificacions

Característica	Detall
Model	OC10 Crocodile Tail BUNDLE
Dimensions (L x A x A)	24 x 18 x 8 polzades (aproximat, basat en les dimensions del producte)
Pes	17.3 lliures
Font d'alimentació	9 V CC (negatiu central)
Effects Loops	10 (7 series, 3 independent)
MIDI	MIDI IN, MIDI OUT/THRU
Color	Negre
Interfície del maquinari	Àudio d'1/4 de polzada
Format del senyal	Analògic

9. Garantia i Suport

One Control products are designed for reliability and performance. For warranty information and technical support, please refer to the official One Control weblloc web o poseu-vos en contacte amb el vostre distribuïdor autoritzat.

Atenció al client: For assistance with product setup, operation, or troubleshooting, please visit the One Control Support Page o contactar directament amb el seu servei d'atenció al client.

Plans de protecció: Additional protection plans may be available for purchase. Please check with your retailer for details on extended warranty options.

	Manual d'usuari del bucle de cua de cocodril One Control Guia d'usuari del One Control Crocodile Tail Loop, un pedal commutador programable de punta amb capacitats MIDI i un buffer BJF integrat.
	One Control Minimal Series MIDI Dual Stereo Loop User Manual Detailed user manual for the One Control Minimal Series MIDI Dual Stereo Loop (MDSL) pedal. Learn about its MIDI loop functionality, stereo/mono capabilities, specifications, MIDI signal control commands (PC and CC), and L1/L2 switch settings for managing mono-to-stereo signal conversion. The MDSL offers compact design and sophisticated functionality for guitarists and musicians.
	One Control Chamaeleo Tail Loop MK2 User Manual User manual for the One Control Chamaeleo Tail Loop MK2, a programmable guitar effects loop switcher with 5 loops, buffer, and intuitive controls.
	Agamidae Tail Loop User Manual User manual for the One Control Agamidae Tail Loop, detailing its features, operation, and technical specifications for managing guitar effects pedals.
	One Control Minimal Series Black Loop with BJF-Buffer: Product Overview i Especificacions Discover the One Control Minimal Series Black Loop, a versatile loop switcher with an integrated BJF-buffer, offering true bypass or buffered operation and dual DC outputs for guitar effects setups. Learn about its features, specifications, and the advanced functionality of the Minimal Series.
	Gebruikershandleiding Chamaeleo Tail Loop MKIII - One Control Gedetailleerde gebruikershandleiding voor de One Control Chamaeleo Tail Loop MKIII, een compacte 5-programmige loopswitcher met 4 serieloops, 1 aparte loop, Mute/Tuner Out en BJF Buffer voor effectieve signaalroutering.

One Control OC10 Crocodile Tail BUNDLE