Motorola HKKN4027A RM Series CPS Programming Cable Instruction Manual

Introducció

The Motorola HKKN4027A CPS Programming Cable is designed to connect your Motorola RM, RDX, and CLP Series Business Radios to a personal computer. This connection facilitates the customization of radio settings and frequencies using compatible Customer Programming Software (CPS).

Què hi ha a la caixa

• RM Series CPS Programming Cable

Configuració

1. Connecting the Cable to Your Radio

1. Ensure your Motorola RM, RDX, or CLP Series radio is powered off.
2. Locate the accessory jack(s) on the side of your radio.
3. Carefully insert the radio-side connector of the HKKN4027A cable into the radio's accessory jack(s). Ensure it is fully seated.
4. Enceneu la ràdio.

2. Connecting the Cable to Your Computer

1. Plug the USB Type A connector of the HKKN4027A cable into an available USB port on your computer.

3. Instal·lació de controladors i programari

The programming cable requires specific drivers to function correctly with your computer. These drivers are typically provided with the Motorola Customer Programming Software (CPS). If a driver CD is included, install the drivers from it. Alternatively, download the latest CPS and drivers from the official Motorola Solutions weblloc.

Nota important: Some programming cables feature a switch labeled 'CPS' and 'Flash'. Ensure this switch is set to the 'CPS' position for standard programming operations.

Image: The Motorola HKKN4027A programming cable features a switch to select between 'CPS' (Customer Programming Software) and 'Flash' modes. For general radio programming, ensure the switch is set to 'CPS'.

4. Configuring the COM Port

After installing the drivers, you may need to configure the correct COM port in your CPS. This is a common step to ensure communication between the software and the radio.

1. Connecteu el cable USB al vostre ordinador.
2. Open your computer's Device Manager (search for 'Device Manager' in Windows).
3. Expand the 'Ports (COM & LPT)' section.
4. Identify the USB-Serial device and note its assigned COM Port (e.g., COM3).
5. Launch your Motorola CPS.
6. Navigate to the radio connection settings (often under a 'Radio' or 'Communication' tab).
7. Select the COM Port that matches the one identified in Device Manager.

En funcionament

Programant la teva ràdio

1. With the cable connected and COM port configured, open your Motorola CPS.
2. Follow the software's instructions to read the current configuration from your radio. This is recommended before making any changes.
3. Modify frequencies, channels, and other settings as needed within the CPS interface.
4. Once modifications are complete, use the software's 'Write to Radio' or 'Program' function to transfer the new settings to your radio.
5. After successful programming, disconnect the cable and restart your radio to apply the new settings.

Manteniment

To ensure the longevity and reliable performance of your Motorola HKKN4027A programming cable, follow these maintenance guidelines:

• Emmagatzematge: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling or kinking the cable, which can damage internal wires.
• Neteja: Feu servir un drap suau i sec per netejar el cable i els connectors. Eviteu utilitzar productes químics agressius o materials abrasius.
• Manipulació: Always grasp the connector ends when plugging or unplugging the cable, rather than pulling on the cable itself.
• Resistència a l'aigua: The cable features a water-resistant design, making it suitable for both indoor and outdoor use. However, it is not fully waterproof. Avoid submerging the cable in water or exposing it to heavy rain for extended periods.

Resolució de problemes

Cable Not Recognized by Computer

• Instal·lació del controlador: Ensure the correct drivers for the programming cable are installed. Reinstalling drivers can often resolve recognition issues.
• COM Port Mismatch: Verify that the COM port selected in your CPS matches the one assigned to the USB-Serial device in your computer's Device Manager (refer to 'Configuring the COM Port' in the Setup section).
• Port USB: Prova de connectar el cable a un port USB diferent de l'ordinador.
• Estat del cable: Inspect the cable for any visible damage. A damaged cable may not function correctly.

Errors de programació

• Potència de ràdio: Ensure the radio is powered on and fully charged during programming.
• Connexió per cable: Confirm that the cable is securely connected to both the radio and the computer.
• Versió del programari: Use the correct version of Motorola CPS compatible with your specific radio model.
• Posició del canvi: If your cable has a CPS/Flash switch, ensure it is in the 'CPS' position.
• Mode de ràdio: Some radios require being in a specific mode (e.g., programming mode) before they can be programmed. Consult your radio's manual.

Especificacions

Garantia i Suport

As a genuine Motorola accessory, this product is subject to Motorola Solutions' standard warranty terms. For specific warranty details, please refer to the documentation included with your purchase or visit the official Motorola Solutions weblloc.

Important: Motorola recomana la compraasing only from an authorized dealer to ensure product authenticity and eligibility for support and warranty services.

For technical support or further assistance, please contact Motorola Solutions customer service or consult their online resources.