1. Producte acabatview
The SINGCALL Wireless Calling System APE560 is a single call button designed to facilitate efficient communication between guests or customers and service staff. This button is an integral part of a larger wireless calling system and cannot be used alone. It requires a compatible receiver (e.g., SINGCALL Watch Receiver APE6600 or Display Receiver APE9300) to function. When pressed, the button sends a signal to the receiver, which then displays the corresponding call number, alerting staff that service is required.
This system is ideal for various service environments, including restaurants, cafes, hotels, food courts, and foot spas, enhancing service efficiency and customer satisfaction.
Image: The SINGCALL Wireless Calling System APE560 single call button in brown, viewed des de dalt.
Image: Restaurant staff demonstrating the efficient service enabled by the SINGCALL wireless paging system.
2. Configuració i instal·lació
The APE560 call button is designed for easy setup. Ensure you have a compatible SINGCALL receiver before proceeding.
2.1 Instal·lació/substitució de la bateria
The call button is powered by a CR2 battery. Follow these steps to install or replace the battery:
- Step 1: Separate the Base
Push the top part of the call button to the right to detach it from its base. - Pas 2: traieu els cargols
Use a small screwdriver to remove the screws securing the internal components. - Step 3: Change Batteries
Carefully remove the old CR2 battery and insert a new one, ensuring correct polarity. Then, reassemble the button by replacing the screws and reattaching the top to the base.
Image: Pushing the call button to the right to separate the base.
Image: Using a screwdriver to access the battery compartment.
Image: Replacing the CR2 battery.
2.2 Col·locació
Place the call button in an easily accessible location for guests or customers, such as on a table, counter, or near a service area. Ensure it is within the operating range of your SINGCALL receiver.
3. Instruccions de funcionament
Using the SINGCALL APE560 call button is straightforward:
- Initiating a Call: When service is required, the user should press the 'Call' button firmly.
- Transmissió del senyal: The button will transmit a wireless signal to the paired SINGCALL receiver. A red light on the button may blink to indicate activation.
- Receiver Notification: The receiver will display the unique number associated with the call button, alerting the service staff.
Important Note on Press Duration:
For reliable signal transmission, ensure the button is pressed for at least un segon. A quick press, even if the red light blinks, may not always send the message to the receiver. A sustained press ensures the signal is properly sent.
Image: A customer pressing the call button, and the receiver displaying the call number.
3.1 Interval de funcionament
The effective operating range of the SINGCALL Wireless Calling System APE560 varies depending on the environment:
- Gamma interior: Up to 130-200 feet (40-60 meters)
- Gamma exterior: Up to 1600-2600 feet (500-800 meters)
Image: Visual representation of the indoor operating range.
Image: Visual representation of the outdoor operating range.
4. Manteniment
To ensure the longevity and optimal performance of your SINGCALL APE560 call button, follow these maintenance guidelines:
- Neteja: Wipe the surface of the button with a soft, damp drap. Eviteu utilitzar productes químics agressius o netejadors abrasius, ja que poden danyar el material.
- Comprovació de la bateria: Regularly check the battery life. If the button's response becomes inconsistent or the indicator light fails to illuminate, it may be time to replace the CR2 battery as described in Section 2.1.
- Protecció del medi ambient: While the button is equipped with a waterproof base and designed to withstand temperature and humidity changes, avoid prolonged exposure to extreme conditions or direct submersion in water.
- Emmagatzematge: If storing the button for an extended period, remove the battery to prevent leakage and potential damage. Store in a cool, dry place.
5. Solució De Problemes
If you encounter issues with your SINGCALL APE560 call button, refer to the following troubleshooting tips:
| Problema | Causa possible | Solució |
|---|---|---|
| Button pressed, but receiver does not display call number. | El botó no s'ha premut el temps suficient. | Ensure the button is pressed firmly for at least un segon. A quick press may not register. |
| Button indicator light does not illuminate. | Bateria baixa o esgotada. | Replace the CR2 battery as per Section 2.1. |
| Call signal is inconsistent or weak. | Out of range or environmental interference. | Ensure the button is within the specified operating range of the receiver. Minimize obstructions like thick walls or metal structures. |
| Button is physically damaged or unresponsive. | Physical impact or internal component failure. | Inspect for visible damage. If damaged, replacement may be necessary. |
6. Especificacions
Detailed specifications for the SINGCALL Wireless Calling System APE560 Single Call Button:
- Marca: SINGCALL
- Número de model: SC-560 (APE560)
- Fabricant: Dongwei technology
- Pes de l'article: 1.76 unces (0.05 quilograms)
- Dimensions del producte: 2.36 x 2.36 x 1.26 polzades
- Color: marró
- Tipus de material: Acrilonitril butadiè estirè (ABS)
- Bateries: Necessita 1 pila CR2
- Característiques: Equipped with waterproof base, stable login mode, anti-temperature and humidity changes, number can be changed optionally with strong re-use ability.
Image: Dimensions of the SINGCALL receiver and call button.
Image: Components of the SINGCALL wireless receiver.
7. Garantia i Suport
Specific warranty information for the SINGCALL Wireless Calling System APE560 is not provided in the product details. For warranty claims or detailed support, please refer to the documentation included with your purchase or contact SINGCALL customer service directly through their official weblloc web o el venedor on es va comprar el producte.
També podeu visitar el SINGCALL Store on Amazon per obtenir informació addicional sobre el producte i recursos d'assistència.
