Introducció
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Performance Tool W50084 10 Amp Variable Speed Polisher/Sander. Please read this manual thoroughly before using the tool and retain it for future reference.
Image: The Performance Tool W50084 Polisher/Sander, showing its main body, D-handle, and polishing pad.
Informació de seguretat
Always observe basic safety precautions when using electrical tools to reduce the risk of fire, electric shock, and personal injury. This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning).
Normes generals de seguretat:
- Llegiu totes les instruccions abans d'utilitzar l'eina.
- Utilitzeu equips de protecció individual adequats, incloent-hi protecció ocular, protecció auditiva i guants.
- Assegureu-vos que la zona de treball estigui neta, ben il·luminada i lliure d'obstacles.
- No feu servir eines elèctriques en atmosferes explosives, com ara en presència de líquids, gasos o pols inflamables.
- Mantingueu els nens i els espectadors allunyats mentre feu servir una eina elèctrica.
- Eviteu l'arrencada accidental. Assegureu-vos que l'interruptor estigui en posició apagada abans de connectar-lo.
- No sobrepasseu. Mantingueu els peus i l'equilibri adequats en tot moment.
- Desconnecteu l'endoll de la font d'alimentació abans de fer qualsevol ajust, canviar accessoris o emmagatzemar l'eina.
- Mantingueu les eines amb cura. Mantingueu les eines de tall afilades i netes.
- Feu servir l'eina correcta per a la vostra aplicació. No forceu l'eina.
- No abusis del cable. No utilitzeu mai el cable per transportar, estirar o desconnectar l’eina elèctrica.
- Guardeu les eines inactives fora de l'abast dels nens i de les persones no formades.
Components i accessoris
The Performance Tool W50084 Polisher/Sander comes with several components and accessories to facilitate various tasks.
- 10 Amp Variable Speed Polisher/Sander Unit
- Ergonomic D-handle
- Hook-and-loop backer pad
- Foam wax applicator
- Terry cloth bonnet
- Gorra de llana sintètica
- Two sanding disc pads
- Clau clau
- 6ft. 2-pronged power cord
Image: Various accessories included with the polisher, such as foam pads, wool bonnets, and sanding discs.
Configuració
Before operating the polisher/sander, ensure it is properly assembled and all accessories are securely attached.
- Attach the D-Handle: Secure the ergonomic D-handle to the front of the polisher using the provided hardware. Ensure it is tightened firmly for stable operation. The D-handle can be positioned for either left or right-hand use.
- Install the Backer Pad: If not already installed, attach the hook-and-loop backer pad to the spindle of the polisher. Use the spanner wrench to tighten it securely.
- Adjuntar accessoris: Depending on your task (polishing or sanding), attach the appropriate accessory (foam wax applicator, terry cloth bonnet, synthetic wool bonnet, or sanding disc) to the hook-and-loop backer pad. Press firmly to ensure it adheres properly.
- Connexió d'alimentació: Ensure the tool's power switch is in the "OFF" position before plugging the 2-pronged power cord into a suitable electrical outlet.
Imatge: Lateral view of the polisher/sander, illustrating the D-handle and the attachment point for pads.
Instruccions de funcionament
Follow these steps for effective and safe operation of your polisher/sander.
- Encès: With the appropriate pad/bonnet attached, hold the tool firmly with both hands using the main grip and the D-handle. Press the power switch to turn the tool on.
- Ajustar velocitat: The tool features variable speed control, allowing for 0-4200 no-load RPM. Use the speed adjustment dial (typically a thumb wheel) to select the desired RPM for your specific task. Lower speeds are generally used for polishing and waxing, while higher speeds are suitable for sanding.
- Aplicació:
- Polit/Encerat: Apply a small amount of polish or wax directly to the foam applicator or the surface. Start the tool at a low speed and spread the product evenly before increasing speed as needed. Move the tool in a consistent, overlapping pattern.
- Poliment: Ensure the sanding disc is securely attached. Start the tool before making contact with the surface. Apply light, even pressure and move the tool smoothly across the surface to avoid gouging.
- Safety Lockout: The tool is equipped with a comfortable paddle switch with a safety lockout feature. Familiarize yourself with its operation to prevent accidental starts.
- Apagar: When finished, release the power switch. Wait for the pad to come to a complete stop before setting the tool down. Disconnect the tool from the power source.
Nota: No official product videos were found for this model. For general usage tips, refer to the written instructions provided.
Manteniment
Regular maintenance ensures the longevity and optimal performance of your polisher/sander.
- Neteja: After each use, wipe down the tool's exterior with a clean, damp cloth. Remove any dust or residue from the ventilation openings to prevent overheating.
- Pad/Bonnet Care: Clean used foam applicators, terry cloth bonnets, and synthetic wool bonnets according to their specific care instructions. Allow them to dry completely before storage.
- Inspecció del cable: Regularly inspect the power cord for any signs of damage, cuts, or fraying. Do not use the tool if the cord is damaged.
- Emmagatzematge: Store the polisher/sander and its accessories in a clean, dry place, out of reach of children.
- Motor de rodaments de boles: The ball bearing motor is designed for long-lasting durability. No user-serviceable parts are typically associated with the motor itself.
Resolució de problemes
If you encounter issues with your Performance Tool W50084 Polisher/Sander, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| L'eina no s'engega ni funciona. | No power supply; power cord damaged; switch in "OFF" position; internal fault. | Check power outlet and cord. Ensure switch is "ON". If problem persists, seek professional service. |
| Tool runs but pad does not spin or spins slowly. | Pad not securely attached; excessive pressure applied; internal mechanism issue. | Ensure pad is firmly attached to backer pad. Reduce pressure. If issue continues, professional service may be required. |
| Vibracions o sorolls excessius. | Pad/bonnet improperly attached or damaged; loose components; internal wear. | Check pad/bonnet for proper attachment and condition. Inspect for any loose parts. If severe, discontinue use and seek professional service. |
| L'eina s'escalfa massa. | Blocked ventilation openings; continuous heavy use; motor overload. | Clear ventilation openings. Allow tool to cool down. Avoid prolonged heavy use. |
Especificacions
Key technical specifications for the Performance Tool W50084 Polisher/Sander:
| Característica | Especificació |
|---|---|
| Model | W50084 |
| Motor | 10 Amp |
| No-Load RPM | 0-4200 RPM (velocitat variable) |
| Voltage | 120 Volts |
| Potència màxima | 1200 watts |
| Pes de l'article | 6.4 lliures (aproximadament 6.35 lliures) |
| Dimensions del producte | 17.3 x 5.1 x 5.1 polzades |
| Font d'alimentació | Elèctric amb cable |
| Material | Acer inoxidable (per a certs components) |
| Color | Negre / Gris |
Garantia i Suport
Performance Tool products are designed for quality and durability. For information regarding warranty coverage, product support, or service, please refer to the warranty card included with your purchase or visit the official Performance Tool weblloc web. També podeu contactar amb el seu servei d'atenció al client per obtenir ajuda.
For additional information, you can visit the Performance Tool Store on Amazon.
