Fender '68 Custom Twin Reverb AmpManual d'instruccions de lifier

1. Introducció i finalview

The Fender '68 Custom Twin Reverb Amplifier pays tribute to the classic look, sound, and performance of Fender's late '60s "silver face" amplifiers. Originally a transitional year for Fender amps, 1968 brought a fresh aesthetic with a silver and turquoise front panel and aluminum "drip edge" grille cloth trim, while maintaining the pure Fender tone. This amplifier is renowned for its clear, deep, and powerful sound, delivering big tube tone with world-class Fender reverb and vibrato effects.

The '68 Custom Twin Reverb features both channels with reverb and tremolo. The "custom" channel incorporates a modified Bassman tone stack, offering modern players enhanced tonal flexibility, especially when using pedals. It also provides quicker gain onset and reduced negative feedback for greater touch sensitivity. Equipped with dual 12-inch Celestion G12V-70 speakers, this amplifier delivers a distinctively rock 'n' roll flavor.

2. Característiques clau

• Dual Channel Reverb and Tremolo: Both channels are equipped with reverb and tremolo effects, offering a vintage feel with modern versatility.
• Modified Bassman Tone Stack: The "custom" channel features a Bassman tone stack, providing enhanced tonal flexibility for use with various pedals.
• Celestion G12V-70 Speakers: Dual 12-inch Celestion G12V-70 speakers deliver a distinctively rock 'n' roll sound.
• Responsivitat millorada: Quicker gain onset and reduced negative feedback contribute to greater touch sensitivity.
• Accessoris inclosos: Comes with a fitted amplifier cover and a 2-button footswitch for convenient control of effects.

3. Configuració

3.1 Desembalatge i col·locació

Traieu amb cura ampl'envàs. Col·loqueu el amplifier on a stable, level surface. Ensure adequate ventilation around the unit to prevent overheating. Avoid placing the ampescalfador a prop de fonts de calor o sota la llum solar directa.

3.2 Connexió d'alimentació

1. Assegureu-vos el amplifier's power switch is in the "OFF" position.
2. Connect the supplied power cord to the AC inlet on the rear panel of the ampmés viu.
3. Connecteu l'altre extrem del cable d'alimentació a una presa de corrent de CA amb connexió a terra.

3.3 Instrument Connection

Connect your guitar or other instrument to one of the input jacks on the front panel using a high-quality instrument cable. The amplifier features two input jacks per channel (Custom and Vintage), typically labeled "1" (high gain) and "2" (low gain). Experiment to find the input that best suits your instrument's output level and desired tone.

3.4 Footswitch Connection

Connect the included 2-button footswitch to the "FOOTSWITCH" jack on the rear panel to enable remote control of the reverb and tremolo effects.

4. Instruccions de funcionament

4.1 Engegada/apagada

1. Per encendre:
   • Ensure all volume controls are set to zero.
   • Flip the "POWER" switch to the "ON" position.
   • Wait approximately 30-60 seconds for the tubes to warm up.
   • Flip the "STANDBY" switch to the "ON" position.
   • Slowly raise the volume to your desired level.
2. Per apagar:
   • Lower all volume controls to zero.
   • Flip the "STANDBY" switch to the "OFF" position.
   • Wait a few seconds, then flip the "POWER" switch to the "OFF" position.

4.2 Controls del panell frontal

The '68 Custom Twin Reverb features two distinct channels: a 'Custom' channel with a modified Bassman tone stack and a 'Vintage' channel for classic Fender tones. Both channels include Reverb and Tremolo.

• Inputs (1 & 2): Input 1 offers higher gain, while Input 2 provides lower gain.
• Volum: Controls the overall output level of the selected channel.
• Aguts: Ajusta la resposta d'alta freqüència.
• Middle (Custom Channel Only): Adjusts the mid-range frequency response.
• Baix: Ajusta la resposta de baixa freqüència.
• Reverb: Controls the intensity of the digital hall reverb effect.
• Speed (Tremolo): Ajusta la velocitat de l'efecte tremolo.
• Intensity (Tremolo): Ajusta la profunditat de l'efecte tremolo.

4.3 Tone Shaping Tips

• For a classic clean Fender tone, start with Volume around 3-5, Treble and Bass at 5-7, and Reverb at 2-4.
• To achieve a natural tube overdrive, increase the Volume control. The amp will begin to break up as it gets louder.
• The 'Custom' channel's Bassman tone stack allows for more aggressive mid-range shaping, ideal for driving pedals.
• Experiment with the Speed and Intensity controls of the Tremolo to find your preferred modulation.

4.4 Product Demonstration Videos

5. Manteniment

5.1 Cures i neteja generals

• Mantenir el ampNetegeu-lo amb un drap suau i sec.
• Eviteu utilitzar netejadors o dissolvents abrasius, ja que poden danyar l'acabat.
• Protegiu el amplifier from dust, moisture, and extreme temperatures.
• When transporting, use the included fitted amplifier cover to protect against scratches and impacts.

5.2 Substitució del tub

Vacuum tubes have a finite lifespan and will eventually need replacement. If you notice a decrease in performance, unusual noise, or a change in tone, it may be time to replace the tubes. It is recommended to have tube replacement and biasing performed by a qualified technician to ensure proper operation and safety.

5.3 Canvi de fusibles

Si el amplifier fails to power on, check the main fuse located on the rear panel. Always replace a blown fuse with one of the exact same type and rating to prevent damage to the amplifier and ensure safety. Consult the specifications section for the correct fuse type.

6. Solució De Problemes

• Sense so:
  • Check all cable connections (power, instrument, speaker).
  • Assegureu-vos el amplifier is powered on and the standby switch is engaged.
  • Verify instrument volume and tone controls are not set to zero.
  • Check if the fuse has blown (refer to Maintenance section).
• Soroll/bruix excessiu:
  • Assegureu-vos que tots els cables estiguin correctament blindats i en bon estat.
  • Proveu de connectar el amplifier into a different power outlet or a power conditioner.
  • Mou el amplifier away from other electronic devices that may cause interference.
  • Faulty tubes can cause noise; consider professional inspection.
• So feble o distorsionat:
  • Comproveu si el cable de l'instrument està danyat.
  • Verify speaker connection.
  • Tubes may be worn out or faulty; professional inspection is recommended.

7. Especificacions

Davant view of the Fender '68 Custom Twin Reverb Ampvidador, espectacleasing its silver and turquoise front panel, aluminum "drip edge" grille cloth trim, and control knobs.

lateral view of the Fender '68 Custom Twin Reverb Amplifier, illustrating its physical dimensions: 10.38 inches depth, 19.88 inches height, and 26.16 inches width.

8. Garantia i Suport

For warranty information, product registration, and technical support, please visit the official Fender website or contact Fender customer service. Keep your proof of purchase for any warranty claims.

Oficial de Fender Weblloc: www.fender.com