1. Introducció
This manual provides instructions for the installation, operation, and maintenance of the Duravit Happy D.2 Toilet Seat and Cover, model 0064610000. This product features a removable seat and cover with stainless steel hinges, designed for durability and ease of cleaning. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.
Figure 1: Duravit Happy D.2 Toilet Seat and Cover. This image displays the white, rectangular-shaped toilet seat and cover, designed for modern bathrooms.
2. Informació de seguretat
- Assegureu-vos sempre que tots els components estiguin ben fixats abans d'utilitzar-los.
- Do not stand on the toilet seat or cover.
- Avoid using abrasive cleaners or harsh chemicals, as these can damage the finish and material.
- Mantingueu les peces petites fora de l'abast dels nens per evitar perills d'asfixia.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- Duravit Happy D.2 Toilet Seat
- Duravit Happy D.2 Toilet Cover
- Stainless Steel Hinges (set)
- Maquinari de muntatge (cargols, volanderes, femelles)
4. Instal·lació
Follow these steps for proper installation of your Duravit Happy D.2 Toilet Seat.
4.1 Eines necessàries (no incloses)
- Clau o alicates ajustables
- Screwdriver (Phillips or Flathead, depending on hardware)
4.2 Passos d'instal·lació
- Preparar la tassa del vàter: Ensure the toilet bowl's mounting holes are clean and free of debris.
- Attach Hinges to Seat: Insert the stainless steel hinges into the designated slots on the underside of the toilet seat. Ensure they are oriented correctly.
- Position Seat on Bowl: Place the toilet seat assembly onto the toilet bowl, aligning the hinge posts with the mounting holes on the bowl.
- Maquinari de muntatge segur: From underneath the toilet bowl, attach the washers and nuts to the hinge posts. Hand-tighten first, then use an adjustable wrench or pliers to gently tighten until secure. Do not overtighten, as this can damage the ceramic.
- Ajustar l'alineació: Ensure the seat is centered and aligned with the toilet bowl. Adjust the hinges if necessary before final tightening.
- Adjuntar la coberta: If the cover is separate, align it with the seat and snap it into place on the hinges.
Figure 2: Installed Duravit Happy D.2 Toilet Seat. This image shows a Duravit Happy D.2 toilet seat and cover installed on a wall-mounted toilet, alongside a matching bidet, in a contemporary bathroom setting with tiled walls.
5. Operation (Usage)
The Duravit Happy D.2 Toilet Seat is designed for straightforward use.
- Lifting the Seat/Cover: Gently lift the seat and/or cover by hand.
- Removable Feature: The seat and cover are designed to be easily removable for cleaning. To remove, typically press release buttons located near the hinges or lift straight up when the seat is in a specific position (refer to hinge mechanism for exact method). Reattach by aligning and pressing down until it clicks into place.
6. Manteniment i Neteja
Regular cleaning will help maintain the appearance and hygiene of your toilet seat.
- Neteja diària: Use a soft cloth with mild soap and water. Wipe down all surfaces of the seat and cover.
- Neteja profunda: For thorough cleaning, remove the seat and cover from the toilet bowl. Clean the hinges and mounting area.
- Eviteu productes químics durs: Do not use abrasive cleaners, scouring pads, strong acids, or alkaline detergents, as these can damage the finish and material of the seat and hinges.
- Assecat: Always dry the seat and hinges thoroughly after cleaning to prevent water spots and maintain the stainless steel finish.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El seient està fluix o inestable. | Els elements de muntatge no estan prou ajustats. | Tighten the nuts underneath the toilet bowl. Do not overtighten. |
| Seat does not align properly. | Hinges are not correctly positioned or adjusted. | Loosen mounting hardware, adjust seat position, then re-tighten. |
| Difficulty removing/reattaching seat for cleaning. | Incorrect removal procedure or debris in hinge mechanism. | Refer to the specific hinge mechanism for removal instructions. Clean any debris from the hinge area. |
8. Especificacions
| Característica | Detall |
|---|---|
| Número de model | 0064610000 |
| Marca | Duravit |
| Material | Stainless Steel (hinges), other components not specified but typically durable plastic/resin. |
| Color | White (Off-White) |
| Forma | Oval (Happy D.2 design) |
| Pes de l'article | Aproximadament 6 lliures (2.7 kg) |
| Dimensions del producte | 15.13 x 22 x 2.38 polzades (38.43 x 55.88 x 6.05 cm) |
| Característiques | Removable cover and seat, Stainless steel hinges |
8.1 Dibuixos dimensionals
Figura 3: lateral View Dimensions. Technical drawing showing the side profile of the toilet seat with key dimensions: 48mm total height, 28mm from hinge center to top, and 20mm from hinge center to bottom.
Figura 4: superior View Dimensions. Technical drawing showing the top view of the toilet seat with key dimensions: 489mm total length, 222mm width at the front, 320mm inner width, 470mm inner length, and hinge spacing of 140mm.
9. Garantia i Suport
Specific warranty details are typically provided with your purchase documentation or can be found on the official Duravit website. For technical support, replacement parts, or warranty claims, please contact Duravit customer service directly.
Fabricant: Duravit
Weblloc: www.duravit.com (Si us plau, consulteu la informació oficial) weblloc web per obtenir la informació de contacte i els recursos d'assistència més actualitzats.)
