Manual d'usuari del comandament a distància Elero MonoTel 2

1. Introducció

The Elero MonoTel 2 is a pure white, 1-channel remote control operating at an 868 MHz wireless radio frequency. It is designed for convenient control of roller shutters, blinds, and awnings. This manual provides essential information for the setup, operation, and maintenance of your device.

Figura 1: Frontal view of the Elero MonoTel 2 Remote Control. The device is white with a dark grey base, featuring three central buttons: an upper square button, a circular button with an orange ring, and a lower square button. The Elero logo is visible on the dark grey base.

2. Característiques clau

• Easy-to-use On/Off Buttons: Designed for intuitive control with a clear LED viewfinestra d’engegada.
• Magnetic Wall Mount: For convenient storage and accessibility.
• Funciona amb bateria: Uses common batteries (not included).
• Compatibilitat versàtil: Supports both unidirectional and bidirectional radio systems.
• Opcions de control avançades: Allows for intermediate positioning and ventilation functions.

3. Configuració

3.1. Instal·lació de la bateria

1. Localitzeu el compartiment de la bateria a la part posterior del comandament a distància.
2. Obriu la coberta del compartiment.
3. Insert the required common batteries, ensuring correct polarity (+/-).
4. Tanqueu bé la tapa del compartiment de la bateria.

3.2. Pairing with Receiver

Refer to the instruction manual of your Elero receiver (e.g., for roller shutters, blinds, or awnings) for specific pairing procedures. Generally, this involves:

• Activating the programming mode on your receiver.
• Pressing a specific button sequence on the MonoTel 2 remote control within a set timeframe.
• Confirming successful pairing, often indicated by an LED on the receiver or the remote.

3.3. Instal·lació de muntatge a la paret

The MonoTel 2 comes with a magnetic wall mount. Choose a suitable location, ensuring it is within range of your controlled devices. Secure the wall mount using appropriate screws (not included) and then simply attach the remote control to the magnetic mount.

4. Instruccions de funcionament

The MonoTel 2 remote control features three primary buttons for operation:

• Upper Square Button: Typically used for Up or Obert functions (e.g., raising a shutter).
• Circular Button (with orange ring): Funciona com a Atureu-vos or Posició intermèdia button. Pressing it during movement will stop the device. A quick press can activate a pre-set intermediate position.
• Lower Square Button: Typically used for Avall or Tancar functions (e.g., lowering a shutter).

4.1. Control bàsic

• To move the device up/open: Premeu el botó Upper Square Button.
• To move the device down/close: Premeu el botó Lower Square Button.
• A parar the device: Press the Circular Button durant el moviment.

4.2. Intermediate Position and Ventilation

If configured with your receiver, a short press of the Circular Button can activate a pre-programmed intermediate position. Consult your receiver's manual for programming these advanced functions.

5. Manteniment

5.1. Neteja

Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the surface.

5.2. Substitució de la bateria

Quan el LED viewing window indicates low battery or the remote's range decreases, replace the batteries as described in the "Battery Installation" section (3.1). Dispose of old batteries responsibly according to local regulations.

6. Solució De Problemes

7. Especificacions

8. Garantia i Suport

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Elero weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.

Manufacturer: Elero