Introducció
This manual provides instructions for the safe and effective use of your Sencor SLR 33 Fabric Shaver. This device is designed to quickly remove unsightly pilling and fuzz balls from various knit fabrics, restoring them to a like-new appearance. Please read these instructions carefully before first use and retain them for future reference.
Image of the Sencor SLR 33 Fabric Shaver, white with a magenta trim around the shaving head and power button, and a transparent lint collection bin.
Instruccions de seguretat
- Mantingueu el dispositiu fora de l'abast dels nens.
- Do not use the shaver on wet fabrics.
- Ensure the fabric is laid flat and taut to prevent damage.
- Do not press excessively hard on the fabric, as this may damage the garment or the shaver blades.
- Turn off the device before cleaning or when not in use.
- Do not attempt to disassemble the shaver beyond routine cleaning.
Configuració
Instal·lació de la bateria
- Locate the battery compartment cover, typically on the handle or base of the shaver.
- Feu lliscar o desenganxeu la tapa per obrir el compartiment.
- Introduïu dues piles AA, assegurant-vos de la polaritat correcta (+/-) tal com s'indica a l'interior del compartiment.
- Col·loqueu la coberta del compartiment de la bateria amb seguretat.
Note: The Sencor SLR 33 Fabric Shaver requires 2 AA batteries, which are included with the product.
Instruccions de funcionament
- Preparar la peça de roba: Lay the fabric flat on a hard, smooth surface. Stretch the area to be treated to ensure it is taut and free of wrinkles.
- Activate the Shaver: Locate the power button, usually on the side or front of the device. Press the button to turn the shaver ON.
- Comença a afaitar-te: Gently glide the shaving head over the pilled or fuzzed areas of the fabric. Use light, circular motions or short, even strokes. Avoid pressing down too hard.
- Monitor Lint Collection: The transparent collection bin allows you to see the accumulated lint. Empty it as it fills to maintain optimal performance.
- Deactivate the Shaver: Once finished, press the power button again to turn the shaver OFF.
The triple blade system is designed to remove lint effectively without damaging your garments when used correctly.
Manteniment
Cleaning the Lint Collection Bin
- Ensure the shaver is turned OFF.
- Carefully detach the transparent collection bin from the main body of the shaver.
- Empty the collected lint and fuzz into a waste bin.
- If necessary, use a small brush (often included with the shaver) to remove any remaining lint from the bin and around the blade area.
- Reattach the collection bin securely until it clicks into place.
Cura de la fulla
- Periodically check the blades for any trapped fibers.
- Use the provided brush to gently clean around the blades. Do not touch the blades directly with your fingers.
- If the shaver's performance decreases, ensure the blades are clean and free from obstruction.
Emmagatzematge
Store the Sencor SLR 33 Fabric Shaver in a dry place, away from direct sunlight and extreme temperatures. Keep it out of reach of children.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| L'afaitadora no s'encén. | Les piles estan gastades o incorrectament inserides. | Comproveu la polaritat de la pila o substituïu-la per piles AA noves. |
| Shaver is not removing lint effectively. | Lint collection bin is full; blades are obstructed; fabric is not taut. | Empty the collection bin. Clean blades with the provided brush. Ensure fabric is laid flat and stretched. |
| L'afaitadora fa un soroll estrany. | Blades or motor obstructed. | Turn off and carefully inspect the blade area for any foreign objects or excessive lint. Clean thoroughly. |
Especificacions
| Marca: | Sence |
| Model: | SLR 33 |
| Font d'alimentació: | Funciona amb piles |
| Bateries: | 2 x AA (inclosos) |
| Voltage: | 1.5 Volts |
| Dimensions del producte: | 7.4 x 5 x 10.4 cm |
| Pes: | 90.72 g |
| Tipus de material: | Knit (suitable for) |
| Color: | Blanc |
Garantia i Suport
Specific warranty information for the Sencor SLR 33 Fabric Shaver is not provided in this document. Please refer to the packaging or the official Sencor weblloc web per obtenir informació detallada sobre els termes i condicions de la garantia.
For product support, technical assistance, or inquiries, please contact Sencor customer service through their official channels. Contact details are typically available on the manufacturer's weblloc o embalatge del producte.
