1. Introducció
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Schneider Electric Osisense XS130B3PAL2 Inductive Proximity Sensor. Please read this manual thoroughly before using the product.
Figure 1: Schneider Electric Osisense XS130B3PAL2 Inductive Proximity Sensor. A detailed view of the cylindrical brass housing, M30 threading, and pre-wired cable connection.
2. Informació general
The Schneider Electric Osisense XS130B3PAL2 is a cylindrical inductive proximity sensor designed for general-purpose industrial applications. It features a robust nickel-plated brass housing and a PPS sensing face, ensuring durability and reliable performance in challenging environments.
Característiques principals:
- Model: XS130B3PAL2
- Tipus de sensor: Sensor de proximitat inductiu
- Habitatge: Cylindrical, M30, L45mm, Nickel-plated Brass
- Sensing Face: PPS
- Sensing Range (Sn): 15 mm
- Subministrament Voltage: 12-24 V DC
- Tipus de sortida: 3-wire, NO (Normally Open), PNP
- Connexió: Pre-wired cable (2 meters length)
- Classificacions de protecció: IP65, IP68, IP69K
- Temperatura de funcionament: -25 °C a +70 °C
- Indicació: Annular LED for status visualization
- Certificacions: E2, CSA, UL
3. Instruccions de seguretat
Seguiu sempre les següents pautes de seguretat per evitar lesions i danys a l'equip:
- Desconnecteu l'alimentació abans de la instal·lació, el cablejat o el manteniment.
- Assegureu-vos de posar a terra correctament per evitar descàrregues elèctriques.
- No supereu el volum de subministrament especificattage (12-24 V DC).
- Avoid exposing the sensor to corrosive substances or extreme mechanical stress beyond its ratings.
- Installation and wiring should be performed by qualified personnel only.
- Comproveu que totes les connexions estiguin segures abans d'aplicar energia.
- This device features double insulation for enhanced protection against electric shocks.
4. Instal·lació
The XS130B3PAL2 sensor is designed for flush mounting and can be installed directly onto a metallic surface or support.
Passos de muntatge:
- Identify the desired mounting location. Ensure sufficient clearance for the sensor body and cable.
- Drill a hole of appropriate diameter (Ø 30 mm) for the M30 x 1.5 thread.
- Insert the sensor into the drilled hole.
- Secure the sensor using the two provided nuts on the external thread. Tighten firmly but do not overtighten to avoid damaging the housing.
- Ensure the sensing face is flush with the mounting surface for optimal performance.
Nota: For non-flush mounting applications, consult the product datasheet for specific mounting distances and considerations to prevent mutual interference between sensors or with metallic objects.
5. Cablatge
The XS130B3PAL2 is a 3-wire, PNP, Normally Open (NO) sensor with a 2-meter pre-wired cable. Follow the wiring diagram below:
- Fil marró: Connect to +12-24 V DC (Power Supply Positive)
- Filferro blau: Connect to 0 V DC (Power Supply Negative / Ground)
- Fil negre: Connect to Load (Output Signal)
Ensure all connections are correct and secure before applying power. Incorrect wiring can damage the sensor or connected equipment.
6. Funcionament
Once properly installed and wired, the sensor is ready for operation. When a metallic object enters the sensing range (15 mm), the sensor's output will switch states.
Sensing Indication:
The sensor features an annular LED indicator. This LED illuminates when a target object is detected within the sensing range, providing visual confirmation of operation and aiding in configuration and troubleshooting.
Principi de detecció:
Inductive proximity sensors generate an electromagnetic field. When a metallic object enters this field, it causes a change in the field, which the sensor detects, triggering its output. The nickel-plated brass housing provides magnetic shielding, enhancing precision and immunity to external magnetic disturbances.
7. Manteniment
The Schneider Electric Osisense XS130B3PAL2 sensor is designed for minimal maintenance. Regular inspection can help ensure long-term reliable operation.
- Neteja: Periodically clean the sensing face to remove dust, dirt, or debris that may accumulate and affect performance. Use a soft, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Inspecció del cable: Check the cable for any signs of damage, such as cuts, abrasions, or kinks. Replace the sensor if the cable is damaged.
- Seguretat de muntatge: Ensure the sensor remains securely mounted. Vibrations or impacts can loosen mounting nuts over time.
- Condicions ambientals: Verify that the operating environment remains within the specified temperature range (-25°C to +70°C) and that the IP protection ratings are not compromised.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El sensor no detecta l'objecte |
|
|
| El LED no s'il·lumina |
|
|
| Detecció intermitent |
|
|
9. Especificacions
| Fabricant | Schneider Electric |
| Número de model | XS130B3PAL2 |
| Tipus de sensor | Sensor de proximitat inductiu |
| Dimensions de la carcassa (L x A x A) | 13.1 x 9.5 x 4.2 cm |
| Pes | 20 grams |
| Material de l'habitatge | Llautó niquelat |
| Sensing Face Material | PPS |
| Tipus de muntatge | Flush, M30 x 1.5 thread, Pole mount |
| Nominal Sensing Distance (Sn) | 15 mm |
| Subministrament Voltage | 12-24 V DC |
| Tipus de sortida | 3-wire, NO (Normally Open), PNP |
| Connexió | Pre-wired cable (2 meters) |
| Classificació de protecció | IP65, IP68, IP69K |
| Interval de temperatura de funcionament | -25 °C a +70 °C |
| Certificacions | E2, CSA, UL |
| Usos recomanats | Industrial automation and machine control |
| Dispositius compatibles | Sistemes de seguretat |
10. Garantia i Suport
Information regarding specific warranty terms and conditions for the Schneider Electric Osisense XS130B3PAL2 Inductive Proximity Sensor is not provided in this document. For detailed warranty information and technical support, please refer to the official Schneider Electric weblloc web o contacteu directament amb el seu servei d'atenció al client.
Components included: Product and instructions (French not guaranteed). Spare parts availability: Information unavailable on spare parts.
