Introducció
This user manual provides comprehensive instructions for the installation, operation, and maintenance of your Hunter Sprinkler XC600 X-Core 6-Station Outdoor Irrigation Controller. The X-Core is an entry-level residential controller designed for reliable performance. It can be enhanced with a Solar Sync ET sensor (sold separately) to transform it into a smart controller, optimizing irrigation runtimes based on local weather conditions for efficient water conservation.
Producte acabatview i Característiques
Figura 1: Frontal view of the Hunter XC600 X-Core Controller with its protective door open, displaying the control panel and included keys.
The Hunter XC600 X-Core controller offers a range of features designed for ease of use and efficient irrigation management:
- 6-Station Control: Manages up to six independent irrigation zones.
- Múltiples programes: Supports 3 independent programs (A, B, C) with 4 start times each, allowing for flexible scheduling.
- Protecció automàtica contra curtcircuits: Protects the controller from electrical damage due to wiring faults.
- Recuperació fàcil de memòria: Stores all programming in non-volatile memory, ensuring settings are retained even during power outages.
- Hunter Quick Check: A diagnostic feature that helps identify and troubleshoot field wiring issues quickly.
- ROAM Remote Control Compatibility: Can be operated remotely with Hunter's ROAM Remote Control (sold separately).
- Solar Sync ET Sensor Compatibility: Integrates with the Solar Sync ET sensor for automatic seasonal adjustment and water conservation.
Configuració i instal·lació
Muntatge del controlador
Figure 2: The Hunter XC600 X-Core Controller securely mounted on an outdoor brick wall, ready for wiring connections.
- Choose a suitable outdoor location, protected from direct sunlight and extreme weather conditions if possible, though the unit is designed for outdoor use.
- Use the provided mounting template or mark the two mounting holes on the wall. Ensure the controller is level.
- Drill pilot holes and insert appropriate wall anchors (if necessary).
- Secure the controller to the wall using the provided screws.
Connexions de cablejat
Figure 3: Internal wiring compartment of the Hunter XC600 X-Core controller, showing the terminal block for station, common, and sensor wire connections.
- Connexió d'alimentació: The controller operates on 120 Volts AC. Connect the power cord to a grounded outdoor outlet. For direct wiring, consult a qualified electrician.
- Valve Wiring: Connect one wire from each solenoid valve to a numbered terminal (1-6) on the controller.
- Cable comú: Connect the common wire from all solenoid valves to the terminal marked "COM". This is crucial for valve operation.
- Relé d'arrencada de la vàlvula mestra/bomba (opcional): If using a master valve or pump start relay, connect its common wire to the "COM" terminal and its control wire to the terminal marked "MV".
- Sensor Wiring (Optional): For rain sensors or Solar Sync ET sensors, connect the sensor wires to the designated "SEN" terminals. Refer to your sensor's manual for specific wiring instructions. Ensure the sensor bypass switch is in the "ACTIVE" position if a sensor is connected.
Instruccions de funcionament
The X-Core controller features a user-friendly dial and button interface for easy programming and operation.
Configuració de la data i l'hora
- Gireu el dial cap a Data/Hora posició.
- Utilitza el + or - buttons to adjust the year, month, day, hour, and minute. Press the > botó per passar a la configuració següent.
Configuració de les hores d'inici
- Gireu el dial cap a Les hores d'inici posició.
- Utilitza el + or - buttons to set the desired start time for Program A (P-A).
- Premeu el botó > button to move to the next start time or program. You can set up to 4 start times per program.
Setting Run Times
- Gireu el dial cap a Temps d'execució posició.
- The display will show the program (e.g., P-A) and station number (e.g., S-1). Use the + or - buttons to set the run time for the current station.
- Premeu el botó > button to move to the next station. Repeat for all stations in the program.
- To switch programs (A, B, C), press the PROG botó.
Establiment de dies d'aigua
- Gireu el dial cap a Jornades d'aigua posició.
- Utilitza el + or - buttons to select specific days of the week for watering. A blinking water drop icon indicates the selected day. Press > per passar al dia següent.
- Alternatively, you can choose odd/even day watering or interval watering.
Funcionament manual
- Manual Single Station: Gireu el dial a Manual. Utilitza el > button to select the station you wish to run. Use + or - to set the run time. The station will begin watering immediately.
- Manual All Programs: Gireu el dial a Manual. Premeu el botó PROG button to select "ALL". All programmed stations will run sequentially.
Sistema desactivat
To stop all automatic watering, turn the dial to the Sistema desactivat position. The display will show "OFF".
Seasonal Adjust (with Solar Sync)
Video 1: Official Hunter X-Core Irrigation Controller Product Guide. This video provides a detailed overview of the controller's features and programming, including water-saving capabilities like seasonal adjustment with Solar Sync.
If a Solar Sync ET sensor is connected, the controller will automatically adjust run times based on local weather. You can manually override this by turning the dial to Ajust estacional and setting a percentage. This feature helps optimize water usage throughout the year.
Manteniment
- Neteja: Periodically wipe down the controller's exterior with a damp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Inspecció del cablejat: Inspeccioneu anualment totes les connexions del cablejat per detectar corrosió o danys. Assegureu-vos que tots els terminals estiguin ben fixats.
- Comprovació del sensor: If using a rain or ET sensor, ensure it is clean and free from obstructions. Test its functionality periodically according to the sensor's manual.
- Hivernització: In regions subject to freezing temperatures, disconnect the power and drain all water from the irrigation system to prevent freeze damage to pipes and valves. The controller itself is designed for outdoor use but protecting it from direct ice buildup is recommended.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La pantalla del controlador està en blanc. | No power to the controller; tripped circuit breaker; faulty transformer. | Check power outlet, circuit breaker. Ensure transformer is securely connected. |
| A specific zone does not water. | Faulty solenoid; broken wire; clogged nozzle; system off or rain sensor active. | Check solenoid for clicks; inspect wiring for breaks (use Hunter Quick Check); clean or replace nozzles; ensure system is not off and sensor bypass is correct. |
| All zones do not water. | Master valve not opening; common wire disconnected; system off; rain sensor active. | Check master valve operation; verify common wire connection; ensure dial is not in "System Off" position; check rain sensor status. |
| "ERR" message on display. | Wiring short circuit detected (Automatic Short Circuit Protection). | Identify and repair the short circuit in the field wiring. The Hunter Quick Check feature can assist. |
Especificacions
- Número de model: XC600
- Dimensions del producte: 5 x 7 x 10 polzades
- Pes de l'article: 1.2 lliures
- Voltage: 120 volts (CA)
- Material: Plàstic
- Color: Gris
- Fabricant: Indústries Hunter
- País d'origen: EUA
Garantia i Suport
For detailed warranty information, please refer to the warranty card included with your product or visit the official Hunter Industries website. Hunter Industries provides support for their products through their website and authorized dealers.
Podeu trobar més informació i recursos de suport a Botiga Hunter a Amazon or the official Hunter Industries weblloc.
