1. Producte acabatview
The Cisco IP Phone 7821 is designed to meet the voice communication needs of information workers and managers. It offers an enhanced user experience and simplified IT administration. This model provides efficient call handling and clear audio quality, making it suitable for various office environments.
Característiques principals:
- Two-lines for efficient call handling.
- High-resolution graphical grayscale display for improved viewing.
- Dedicated fixed keys for messaging, directory, speaker, and two-way navigation.
- Altaveu integrat per a comunicació amb mans lliures.
- Wideband audio for enhanced clarity with handset, speaker, or headset.
- Power over Ethernet (PoE) Class 1 for reduced energy costs and simplified installation.
Figura 1: Frontal view of the Cisco IP Phone CP-7821-K9.
2. Configuració i instal·lació
Follow these steps to set up your Cisco IP Phone CP-7821-K9:
- Desempaqueta el telèfon: Carefully remove all components from the packaging. Ensure you have the phone unit, handset, handset cord, and Ethernet cable. Note that a separate power adapter is not included if using Power over Ethernet (PoE).
- Connecteu el telèfon: Connecteu un extrem del cable en espiral del auricular a l'auricular i l'altre extrem al port d'auricular de la base del telèfon.
- Connexió a la xarxa (PoE): If your network supports Power over Ethernet (PoE), connect one end of the Ethernet cable to the network port (labeled with a network icon) on the back of the phone and the other end to a PoE-enabled network switch or router. The phone will power on automatically.
- Connect to Network (Non-PoE): If PoE is not available, you will need an optional Cisco power adapter (not included). Connect the power adapter to the power port on the back of the phone, then connect the Ethernet cable to the network port and your network.
- Engegada inicial: The phone will begin its boot-up sequence. This may take a few minutes as it connects to your network and registers with your call control system. The display will show progress messages.
- Configuració: Once booted, the phone will typically receive its configuration from your network's call control system. If manual configuration is required, consult your IT administrator or the detailed Cisco documentation for your specific network setup.
Figura 2: lateral view of the phone, illustrating port locations for connections.
3. Instruccions de funcionament
Fer i rebre trucades:
- Per fer una trucada: Lift the handset, press the speakerphone button, or press the headset button. Dial the number using the keypad.
- Per respondre una trucada: Lift the handset, press the flashing line button, press the speakerphone button, or press the headset button.
- Per finalitzar una trucada: Replace the handset, press the speakerphone button again, or press the headset button again.
Using Phone Features:
- Control de volum: Use the volume bar located on the left side of the keypad to adjust the volume of the handset, speakerphone, or ringer.
- Silenciar: Premeu el botó Silenciar button (microphone with a slash through it) to mute your microphone during a call. Press again to unmute.
- Altaveu: Premeu el botó Altaveu button (speaker icon) to toggle speakerphone mode on or off.
- Auriculars: Premeu el botó Auriculars button (headset icon) to use a connected headset.
- Manteniu: Durant una trucada, premeu el botó Aguanta button (two vertical lines) to place the call on hold. Press the flashing line button to resume the call.
- Transferència: Durant una trucada, premeu el botó Transferència button (two arrows). Dial the number to transfer to, then press Transferència de nou.
- Conferència: Durant una trucada, premeu el botó Conferència button (three people icon). Dial the number of the person you want to add, then press Conferència de nou per unir-se a tots els partits.
- Correu de veu: Premeu el botó Missatges button (envelope icon) to access your voicemail. Follow the voice prompts.
- Directori: Premeu el botó Directori button (open book icon) to access your personal or corporate directories.
- Settings/Preferences: Premeu el botó Configuració button (gear icon) to access phone settings such as ringtone, contrast, and backlight. Use the navigation cluster (circular button with arrows) to scroll through options and the center button to select.
Figure 3: Cisco IP Phone 7800 Series, illustrating the family of devices.
4. Manteniment
To ensure the longevity and optimal performance of your Cisco IP Phone, follow these maintenance guidelines:
- Neteja: Utilitzeu un drap suau i sense pelusa lleugerament dampened with water to clean the phone's exterior. Avoid using abrasive cleaners, solvents, or aerosol sprays, as these can damage the phone's finish or internal components.
- Handset and Cords: Regularly check the handset cord for any kinks or damage. Replace if necessary to maintain clear audio.
- Ventilació: Ensure the phone is placed in an area with adequate ventilation to prevent overheating. Do not block any ventilation openings.
- Medi ambient: Keep the phone away from direct sunlight, excessive heat sources, and areas with high humidity or dust.
5. Solució De Problemes
If you encounter issues with your Cisco IP Phone, try the following troubleshooting steps:
| Problema | Causa possible | Solució |
|---|---|---|
| El telèfon no s'encén | No power from PoE switch or power adapter. | Verify Ethernet cable is securely connected to a PoE-enabled port, or ensure the optional power adapter is correctly connected and receiving power. |
| Sense to de marcatge | Phone not registered with call control system; network issue. | Check network cable connection. Restart the phone by unplugging and re-plugging the Ethernet cable (or power adapter). Contact your IT administrator if the issue persists. |
| Qualitat d'àudio deficient | Loose cable connection; network congestion; faulty handset/headset. | Ensure all cables are securely connected. Try adjusting the volume. Test with a different handset or headset if available. Report network issues to IT. |
| La pantalla està en blanc o tènue | Backlight setting; power issue. | Premeu el botó Configuració button (gear icon) and navigate to "Backlight" to ensure it's set to "On". Check power connection. |
6. Especificacions
| Característica | Detall |
|---|---|
| Número de model | CP-7821-K9 |
| Dimensions del producte | 11 x 3 x 12 polzades |
| Pes de l'article | 2.46 lliures (1.12 quilograms) |
| Color | Charcoal, Black |
| Tipus de telèfon | Cordat |
| Font d'alimentació | Corded Electric (PoE Class 1 supported) |
| Mostra | High-resolution graphical grayscale display (396 x 162 pixel) |
| Interruptor Ethernet | Integrated IEEE 10/100 switch |
| Àudio | Àudio de banda ampla |
| Què hi ha a la caixa | IP Base (phone unit, handset, handset cord, Ethernet cable) |
Figure 4: Detailed specifications comparison for Cisco IP Phone 7800 Series, including CP-7821-K9.
7. Garantia i Suport
Per obtenir informació sobre la garantia i assistència tècnica, consulteu la pàgina oficial de Cisco. website or contact your authorized Cisco reseller. Support resources typically include online documentation, FAQs, and customer service contact details.
Per obtenir més ajuda, visiteu el Botiga Cisco a Amazon.
