Viper 2-Way LCD Remote Control (DEI7756V) User Manual

Introducció

This manual provides comprehensive instructions for the operation and maintenance of your Viper 2-Way LCD Remote Control (Model DEI7756V). This remote serves as an additional or replacement unit for compatible Viper security and remote start systems. It features up to one-mile range, a rechargeable battery, and a premium LCD display for visual and audible confirmation of commands.

Figura 1: Davant view of the Viper 2-Way LCD Remote Control, displaying an illuminated screen with a lock icon and time. This remote provides visual feedback on your vehicle's status.

Compatibilitat del sistema

The DEI7756V remote is compatible with the following Viper security and remote start systems:

• 3706 V
• 3806 V
• 4706 V
• 4606 V
• 5606 V
• 5706 V
• 5806 V
• 9756 V

Ensure your existing Viper system is listed above for proper functionality.

Configuració i aparellament

To ensure proper operation, the remote control must be paired with your Viper security and remote start system. The pairing process typically involves placing the vehicle's system into programming mode and then activating the remote.

Pairing the Remote Control with Your System:

1. Prepare the vehicle system: Refer to your Viper system's main unit manual for specific instructions on entering programming mode. This often involves turning the ignition key to the ON position and pressing a control button (e.g., Valet button) a specific number of times. The system will usually respond with a chirp or LED flash to indicate it's in programming mode.
2. Activa el comandament a distància: While the vehicle system is in programming mode, press and hold the BLOC button on the DEI7756V remote until the remote's LCD screen displays "PROG" or a similar indication.
3. Confirm pairing: The vehicle system should respond with a chirp or flash to confirm successful pairing. The remote's LCD may also show a confirmation message.
4. Sortir del mode de programació: Turn the vehicle's ignition key to the OFF position to exit programming mode. Test the remote's functions to ensure proper operation.

Note: If you encounter difficulties, consult the detailed user guide for your specific Viper system or seek professional installation assistance.

Instruccions de funcionament

The DEI7756V remote features a 5-button layout with a premium LCD display for intuitive control and feedback.

Figura 2: The Viper 2-Way LCD Remote Control, showing the main lock and unlock buttons and the blank LCD screen when not active.

Funcions bàsiques:

• Bloqueig: Premeu el botó BLOC button once to arm your security system and lock your vehicle's doors. The remote's LCD will display a lock icon and provide audible confirmation.
• Desbloquejar: Premeu el botó DESBLOQUEAR button once to disarm your security system and unlock your vehicle's doors. The remote's LCD will display an unlock icon and provide audible confirmation.
• Inici remot: To remote start your vehicle, press and hold the Inici remot button (often indicated by a lightning bolt or similar icon) for approximately 3 seconds. The remote will confirm the command on its LCD.
• Alliberament del tronc: If programmed, press and hold the Alliberament del maleter button (often indicated by a trunk icon) for approximately 3 seconds to open your vehicle's trunk.
• Panic/Car Finder: Premeu el botó Pànic button (often indicated by a siren icon) to activate the vehicle's alarm. Press again to disarm. This can also be used to locate your vehicle in a crowded parking lot.

The premium LCD display provides visual feedback on the status of your vehicle, including lock/unlock status, remote start confirmation, and battery level.

Figura 3: lateral view of the Viper 2-Way LCD Remote Control, highlighting the additional function buttons located on the side of the device.

Manteniment i Càrrega

The DEI7756V remote control features a rechargeable battery. Regular charging ensures optimal performance and range.

Càrrega del comandament a distància:

• Locate the micro USB charging port on the side of the remote control.
• Connect a standard micro USB cable to the remote and to a USB power source (e.g., computer USB port, wall adapter).
• The LCD screen will typically display a charging indicator. Allow the remote to charge fully.
• Desconnecteu el cable un cop finalitzada la càrrega.

Note: A full charge can last for an extended period, providing convenience and reliability.

Resolució de problemes

If you experience issues with your Viper 2-Way LCD Remote Control, consider the following common solutions:

• El comandament a distància no respon:
  • Ensure the remote's battery is charged. Connect it to a micro USB charger.
  • Verify that you are within the operating range (up to one mile). Obstacles can reduce range.
  • Attempt to re-pair the remote with your vehicle's system (refer to the "Setup and Pairing" section).
• La pantalla LCD no es mostra:
  • Charge the remote. A low battery can cause the screen to go blank.
  • If the screen is physically damaged (e.g., cracks, dark spots), the remote may need replacement.
• Funcionalitat intermitent:
  • Check for strong electromagnetic interference in the area.
  • Ensure no physical obstructions are blocking the signal path between the remote and the vehicle.

For persistent issues, it is recommended to contact a certified Viper installer or customer support.

Especificacions

Garantia i Suport

Viper products are designed for reliability and performance. For warranty information and technical support, please refer to the official Viper weblloc web o contacteu directament amb el seu servei d'atenció al client.

• Guia oficial d'usuari: For a more detailed user guide, you may refer to the PDF document available aquí.
• Suport al producte: Visita el Botiga Viper a Amazon per obtenir informació i recursos addicionals sobre el producte.
• Avís legal: "brand new fast shipping" - This statement is from the product's legal disclaimer and refers to the condition and delivery of the product at the time of purchase.