Manual d'instruccions del conjunt de tall de cabells/cura corporal AEG BHT 5640

1. Introducció

Thank you for choosing the AEG BHT 5640 Body Care/Hair Trimmer Set. This versatile 4-in-1 grooming kit is designed for precise and gentle hair removal across various body areas. Please read this instruction manual carefully before first use to ensure safe operation and optimal performance of your device. Keep this manual for future reference.

2. Instruccions de seguretat

• Aquest aparell el poden utilitzar nens a partir de 8 anys i persones amb capacitats físiques, sensorials o mentals reduïdes o amb manca d'experiència i coneixements si han rebut supervisió o instruccions sobre l'ús de l'aparell d'una manera segura i entenen els perills que comporta. .
• Els nens no jugaran amb l'aparell. La neteja i el manteniment dels usuaris no els han de fer els nens sense supervisió.
• Do not immerse the appliance in water or other liquids. The housing is beam-water-protected (IPX5), but the charging base is not.
• Only use the original charging adapter provided with the device.
• No utilitzeu l'aparell si està danyat o funciona malament.
• Mantingueu l'aparell lluny de fonts de calor i de la llum solar directa.
• Ensure hands are dry when handling the appliance and charger.
• For hygienic reasons, avoid sharing the appliance with others.
• Always switch off the appliance before changing attachments or cleaning.

3. Producte acabatview

The AEG BHT 5640 is a versatile grooming tool featuring a main trimmer unit and four interchangeable attachment heads, along with a charging/storage stand and accessories.

Components clau:

• Unitat de retallada principal
• Hair Cutting Attachment (32 mm width) with adjustable comb (11-20 mm in 10 stagés)
• Beard Cutting Attachment (21 mm width) with adjustable comb (2.5-4.5 mm in 5 stagés)
• Shaver Attachment (22 mm width)
• Nose/Ear Hair Remover Attachment
• Charging/Storage Stand
• Raspall de neteja
• Pinta

Figura 1: The AEG BHT 5640 main trimmer unit with various attachments displayed on its charging and storage stand.

Figura 2: All components of the AEG BHT 5640 set, including the main unit, four attachment heads, adjustable combs, cleaning brush, and comb.

4. Configuració

1. Càrrec inicial: Before first use, fully charge the trimmer for approximately 8-10 hours. Place the main trimmer unit into the charging stand and connect the power adapter to a suitable electrical outlet. The charging indicator light will illuminate.
2. Connectant els caps: To attach an accessory head, align the head with the main trimmer unit and gently push until it clicks into place. To remove, pull the head straight off.
3. Col·locació de pintes: For the hair cutting and beard cutting attachments, slide the desired adjustable comb onto the attachment head until it locks. Adjust the cutting length by sliding the comb adjuster.

5. Instruccions de funcionament

Ensure your skin and hair are clean and dry before use for best results, unless using the shaver attachment which can be used on wet skin.

Funcionament general:

• Press the ON/OFF button to start the trimmer.
• Mantingueu la retalladora lleugerament inclinada contra la pell.
• Moveu el tallador de cabells lentament i constantment en la direcció contrària al creixement del pèl.
• Press the ON/OFF button again to turn off the trimmer.

Ús dels fitxers adjunts:

1. Hair Cutting Attachment: Attach the hair cutting head and the desired adjustable comb. Select the desired cutting length (11-20 mm). Guide the trimmer against the hair growth.
2. Beard Cutting Attachment: Attach the beard cutting head and the desired adjustable comb. Select the desired cutting length (2.5-4.5 mm). Trim your beard by moving the trimmer in smooth strokes.
3. Shaver Attachment: Attach the shaver head. Use on dry or wet skin. Gently press the shaver against the skin and move in short, circular motions for a close shave.
4. Nose/Ear Hair Remover: Attach the nose/ear hair remover head. Carefully insert the trimmer tip into the nostril or ear canal. Move it gently to trim unwanted hair. Do not insert too deeply.

6. Manteniment

Regular cleaning ensures optimal performance and extends the lifespan of your trimmer.

Neteja:

• Després de cada ús: Switch off the trimmer. Remove the attachment head. Use the provided cleaning brush to remove any loose hairs from the blades and the trimmer unit.
• Esbandida: The main trimmer unit and attachment heads are beam-water-protected (IPX5). They can be rinsed under running water. Ensure the trimmer is switched off and disconnected from the charger before rinsing. Allow all parts to air dry completely before reassembling or storing.
• Do NOT rinse the charging stand or power adapter.

Figura 3: The AEG BHT 5640 trimmer head being rinsed under running water, demonstrating its IPX5 water protection.

Emmagatzematge:

Store the trimmer and its accessories in the charging/storage stand in a dry place, away from direct sunlight and out of reach of children.

7. Solució De Problemes

8. Especificacions

• Marca: AEG
• Model: 5640 BHT
• Número de model de l'article: 5640 BHT
• Dimensions del producte: 4 x 16.9 x 4 cm
• Pes de l'article: 20 g (0.02 quilograms)
• Font d'alimentació: Battery operated (Batteries required: Yes)
• Protecció de l'aigua: IPX5 (Beam-Water-Protected Housing)
• Hair Cutting Width: 32 mm
• Hair Cutting Lengths: 11 - 20 mm (10 stagés)
• Beard Cutting Width: 21 mm
• Beard Cutting Lengths: 2.5 - 4.5 mm (5 stagés)
• Shaver Width: 22 mm
• UPC: 795545111297
• Data de primera disponibilitat: 18 de desembre de 2013

9. Garantia i Suport

For warranty information or technical support, please refer to the warranty card included with your product or contact AEG customer service. Keep your proof of purchase for any warranty claims.

Fabricant: AEG