Introducció
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the Falcon B101S Q 626 B Series Grade 2 Medium Duty Cylindrical Lock. This lock features a passage function with a Quantum lever and a keyless cylinder, designed for applications requiring reliable, non-locking access.
Image: Falcon B101S Q 626 Passage Function Quantum Lever Lock in Satin Chrome finish, showing both exterior and interior levers and the latch mechanism.
Configuració i instal·lació
Components inclosos:
- Lock Chassis
- Palanca exterior
- Palanca interior
- Roses (interior and exterior)
- Through-bolted Rose Inserts
- Conjunt de forrellat
- Placa de vaga
- Cargols de muntatge
Eines necessàries:
- Tornavís Phillips
- Cinta mètrica
- Llapis
- Wood Chisel (if needed for strike plate)
- Drill with appropriate bits (for new installations)
Passos d'instal·lació:
- Prepara la porta: Ensure the door preparation meets ANSI A156.2 Series 4000 Grade 2 standards. The lock is non-handed, meaning it can be installed on left or right-hand doors without modification.
- Instal·leu el forrellat: Insert the latch bolt assembly into the edge bore hole of the door. Ensure the bevel of the latch faces the door frame. Secure with screws.
- Install Exterior Chassis: Insert the exterior lock chassis into the cross bore hole, ensuring the spindle engages with the latch mechanism.
- Install Interior Chassis: Place the interior rose and lever assembly over the interior side of the door, aligning it with the exterior chassis.
- Bloqueig segur: Use the through-bolts to secure the interior and exterior assemblies together. Tighten screws evenly to prevent binding.
- Attach Levers: Secure the levers to the spindles. For the Quantum lever, ensure the retainer is properly seated.
- Instal·leu la placa de tancament: Mark and chisel out the door frame for the strike plate, ensuring the latch bolt engages smoothly. Secure the strike plate with screws.
- Prova de funcionament: Close the door and test the operation of both levers to ensure the latch retracts and extends freely.
Instruccions de funcionament
The Falcon B101S Q 626 lock is a passage function lock, meaning it does not have a locking mechanism. Both the interior and exterior levers are always free to operate, allowing unrestricted access. To open the door, simply depress either the interior or exterior lever. The latch bolt will retract, allowing the door to open. Releasing the lever will allow the latch bolt to extend, securing the door in the closed position.
Manteniment
Regular maintenance ensures the longevity and smooth operation of your Falcon lock.
- Neteja: Netegeu les superfícies exteriors del pany amb un drap suau iamp drap. Eviteu netejadors o dissolvents abrasius, ja que poden danyar l'acabat.
- Lubricació: Periodically apply a small amount of silicone-based lubricant to the latch bolt mechanism and inside the lever hub to maintain smooth operation. Do not use oil-based lubricants, which can attract dust and debris.
- Inspecció: Annually inspect all mounting screws for tightness. Loose screws can affect the lock's performance and durability.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Lever is stiff or hard to turn. | Lack of lubrication; debris in mechanism; misaligned installation. | Apply silicone lubricant. Clean visible debris. Check for proper alignment during installation. |
| El forrellat no es retrau completament. | Binding due to overtightened screws; debris in latch mechanism. | Loosen mounting screws slightly and re-test. Clean latch bolt area. |
| Door rattles when closed. | Strike plate not properly aligned or shimmed. | Adjust strike plate position or add shims behind it to reduce play. |
| Levers feel loose or wobbly. | Mounting screws are loose; lever retainer not fully engaged. | Tighten all mounting screws. Ensure lever retainer is properly seated. |
Especificacions
| Característica | Detall |
|---|---|
| Marca | Falcó |
| Número de model | B101S Q 626 |
| Tipus de bloqueig | Cylindrical Lock, Passage Function |
| Estil de palanca | Quantum Lever |
| Tipus de cilindre | Sense clau |
| Acabar | Crom setinat (626) |
| Material | Alloy Steel, Brass, Bronze, Chrome, Zinc |
| Grau | ANSI/BHMA Grau 2 |
| Entrega | Sense mà |
| Llistat UL | 1.5 hour fire door |
| Pes de l'article | 3.62 lliures |
| Dimensions del paquet | 9.5 x 7.1 x 3.8 polzades |
Informació de la garantia
Falcon provides a 10-year warranty for the B101S Q 626 B Series Grade 2 Medium Duty Cylindrical Lock. This warranty covers defects in material and workmanship under normal use. For specific terms and conditions, please refer to the official Falcon warranty documentation or contact customer support.
Suport
For further assistance, technical support, or warranty claims, please contact Falcon customer service. You can typically find contact information on the manufacturer's official weblloc web o a través del vostre distribuïdor de productes.
Per a més informació, visiteu l'oficial Falcon Brand Page.
