Fagor Commercial CZ701135000 230 V Inlet Valve Instruction Manual

1. Introducció

This manual provides essential information for the safe and effective installation, operation, and maintenance of the Fagor Commercial CZ701135000 230 V Inlet Valve. Please read these instructions thoroughly before proceeding with any installation or service to ensure proper function and to prevent damage or injury.

2. Informació de seguretat

ADVERTIMENT: La instal·lació, l'ajustament, l'alteració, el servei o el manteniment inadequats poden causar danys a la propietat, lesions o la mort. Llegiu atentament les instruccions d'instal·lació, funcionament i manteniment abans d'instal·lar o donar servei a aquest equip.

• Always disconnect power and water supply to the appliance before installing, servicing, or removing the inlet valve.
• Installation should only be performed by a qualified technician in accordance with all local and national plumbing and electrical codes.
• Ensure all connections are secure and leak-free after installation.
• Use only genuine Fagor Commercial replacement parts to ensure compatibility and maintain product integrity.

3. Producte acabatview

The Fagor Commercial CZ701135000 is a 230 V inlet valve designed as a genuine OEM replacement part for various Fagor Industrial equipment. This component is crucial for controlling the flow of water into commercial appliances such as ovens, cooking units, buffets, dishwashing systems, laundry equipment, and commercial refrigeration units. Its robust design ensures reliable performance and longevity within demanding commercial environments.

Figura 1: Frontal view of the Fagor Commercial CZ701135000 230 V Inlet Valve, showing the main body and electrical coil.

4. Configuració i instal·lació

This inlet valve is intended for replacement purposes in compatible Fagor Industrial equipment. Follow these general steps for installation. Refer to your specific appliance's service manual for detailed instructions.

1. Preparació: Ensure the appliance is completely disconnected from its electrical power source and the main water supply is shut off.
2. Accés: Carefully access the area where the existing inlet valve is located within the appliance.
3. Desconnecteu la vàlvula antiga: Disconnect any electrical wiring and water lines attached to the old inlet valve. Be prepared for residual water in the lines.
4. Treure la vàlvula antiga: Unmount and remove the old inlet valve from its position.
5. Instal·lar una vàlvula nova: Position the new Fagor Commercial CZ701135000 inlet valve in the same location. Secure it using appropriate fasteners.
6. Connecteu les línies d'aigua: Connect the water inlet and outlet lines to the new valve. Ensure all connections are tight to prevent leaks.
7. Connexió elèctrica: Reconnect the 230 V electrical wiring to the valve's terminals. Ensure correct polarity if specified.
8. Prova: Restore the water supply and check for leaks. Then, restore electrical power and test the appliance's water fill function.

Figura 2: lateral view of the inlet valve, highlighting the threaded water connection point.

5. Instruccions de funcionament

The Fagor Commercial CZ701135000 inlet valve operates automatically as an integral part of the Fagor Industrial equipment it is installed in. Once correctly installed and connected, it controls the flow of water into the appliance based on the appliance's programmed operational cycles. No direct user interaction is required for the valve's operation.

6. Manteniment

To ensure the longevity and proper function of your inlet valve and the appliance it serves, consider the following maintenance guidelines:

• Inspecció periòdica: Periodically inspect the valve and its connections for any signs of leaks, corrosion, or physical damage.
• Qualitat de l'aigua: Ensure the water supply to the appliance is clean and free of sediment or debris, which can clog or damage the valve. Consider installing a water filter if water quality is poor.
• Neteja: If accessible, gently clean any external dirt or grime from the valve body. Do not use harsh chemicals.

Figura 3: Primer pla view of the electrical terminals on the inlet valve's solenoid.

7. Solució De Problemes

If you experience issues related to water supply in your Fagor Industrial appliance, the inlet valve may be a factor. Here are some common troubleshooting steps:

• Sense flux d'aigua:
  • Check if the main water supply to the appliance is open.
  • Verify that the appliance is receiving electrical power.
  • Inspect the electrical connections to the inlet valve for looseness or damage.
  • Check for blockages in the water inlet line or within the valve's filter screen (if present).
• Continuous Water Flow (Valve Not Closing):
  • This often indicates a faulty valve or debris preventing it from closing completely.
  • Disconnect power and water, then inspect the valve for foreign objects.
• Fuites:
  • Tighten all water connections to the valve.
  • Inspect the valve body for cracks or damage. A damaged valve requires replacement.

For complex issues or if troubleshooting does not resolve the problem, contact a qualified service technician.

Figura 4: Angle view of the inlet valve, showing both the threaded water inlet and the hose barb outlet.

8. Especificacions

9. Informació de la garantia

Specific warranty details for the Fagor Commercial CZ701135000 230 V Inlet Valve are typically provided at the point of purchase or with the original appliance documentation. Please retain your proof of purchase. For detailed warranty terms and conditions, contact your authorized Fagor Commercial dealer or the manufacturer directly.

10. Suport

For technical assistance, replacement parts, or service inquiries regarding the Fagor Commercial CZ701135000 230 V Inlet Valve, please contact:

• Your authorized Fagor Commercial dealer.
• Fagor Commercial customer service (refer to the Fagor Commercial website for contact information).

When contacting support, please have the model number (CZ701135000) and the serial number of your appliance readily available.