Razor Power Rider 360 Electric Drifting Trike

1. Informació important de seguretat

WARNING: To avoid serious injury, always follow these safety guidelines:

• Always wear a helmet and other protective gear (knee pads, elbow pads) when operating the Power Rider 360.
• Adult supervision is required for riders under 18 years of age.
• Recommended for riders aged 8 years and older.
• Maximum rider weight: 120 lbs (54 kg).
• Do not ride at night or in low-visibility conditions.
• Eviteu circular per superfícies mullades, irregulars o relliscoses.
• Keep fingers and other body parts away from moving parts, such as the chain and wheels.
• Aquest producte conté substàncies químiques que l'estat de Califòrnia sap que causen càncer i defectes congènits o altres danys reproductius (advertència de la Proposició 65).
• The electrical system is certified compliant with UL2272 by ACT Lab LLC, an accredited testing lab.

Image: UL2272 Certification Logo, indicating compliance with safety standards.

2. Producte acabatview

The Razor Power Rider 360 is an electric-powered three-wheeler designed for recreational use, offering speeds up to 9 mph and the ability to perform 360-degree spins and drifts. It features a robust design for durability and an engaging riding experience.

Imatge: Anvers view of the Razor Power Rider 360 electric drifting trike.

Característiques principals:

• Chain-driven motor for reliable power.
• Push-button throttle for easy acceleration.
• Speeds up to 9 mph (14 km/h).
• Fins a 40 minuts d'ús continu amb una sola càrrega.
• Front, hand-operated braking system for controlled stops.
• Welded steel frame with moto-style double crown fork design for durability.
• Hi-impact pneumatic front wheel for a smooth ride.
• Rear, dual inclined casters for drifting and spinning action.
• Rubber grips and folding foot pegs for comfort and convenience.
• 12V sealed lead acid rechargeable battery system with charger.

Què hi ha a la caixa:

• Razor Power Rider 360 Electric Drifting Trike
• 12V Sealed Lead Acid Rechargeable Battery (pre-installed)
• Carregador de bateria
• Manual d'instruccions

3. Instruccions de muntatge

The Razor Power Rider 360 requires some assembly before initial use. Please follow the steps below carefully. It is recommended to have an adult perform the assembly.

Eines necessàries (no incloses):

• Clau ajustable
• Claus hexagonals (claus Allen)
• Tornavís

Passos de muntatge:

1. Attach the Handlebars: Secure the handlebars to the front fork using the provided bolts and tighten them firmly. Ensure the brake lever is correctly positioned for easy access.
2. Instal·leu la roda davantera: If not pre-installed, attach the pneumatic front wheel to the fork. Ensure all nuts and bolts are securely fastened.
3. Mount the Seat: Position the seat on the frame and secure it with the appropriate hardware. The seat is adjustable; choose the position that best suits the rider's leg length.
4. Attach Foot Pegs: Install the folding foot pegs to the designated points on the frame.
5. Connect Brake Cable: Ensure the front brake cable is properly connected and adjusted for effective braking. Test the brake function before riding.
6. Inspecció final: Double-check all nuts, bolts, and connections to ensure they are tight and secure. Verify that all moving parts operate smoothly.

Imatge: Lateral view of the Razor Power Rider 360, showing the overall structure.

Image: Close-up of the handlebars with rubber grips and the hand-operated brake lever.

Image: Close-up of the ergonomic seat, which is adjustable.

Image: Close-up of the hi-impact pneumatic front wheel and folding foot pegs.

4. Carregant la bateria

The Power Rider 360 is equipped with a 12V sealed lead acid rechargeable battery. Proper charging is essential for optimal performance and battery longevity.

Procediment de càrrega:

1. Ensure the Power Rider 360 is turned off before charging.
2. Locate the charging port on the unit.
3. Connecteu el carregador a una presa de corrent estàndard (100-240 V CA).
4. Connect the charger to the charging port on the Power Rider 360.
5. The charger's indicator light will typically show red during charging and turn green when charging is complete.
6. For the first charge, charge the battery for a full 12 hours. Subsequent charges should also be approximately 12 hours, even if the light turns green sooner. Do not charge for more than 24 hours.
7. Desconnecteu el carregador un cop finalitzada la càrrega.

IMPORTANT: Do not store the Power Rider 360 with a fully discharged battery. Recharge after each use.

5. Instruccions de funcionament

Familiarize yourself with the controls and operation before riding. Always wear appropriate safety gear.

Starting the Ride:

1. Assegureu-vos que la bateria estigui completament carregada.
2. Sit firmly in the seat with both feet on the folding foot pegs.
3. Turn on the power switch (usually located near the seat or foot area).
4. Press the push-button throttle located on the handlebar to engage the motor and begin moving.

Steering and Braking:

• Steer by turning the handlebars left or right.
• To slow down or stop, release the throttle button and gently squeeze the hand-operated brake lever on the handlebar.

Drifting and Spinning:

The Power Rider 360 is designed for drifting and 360-degree spins using its dual inclined rear casters. To initiate a drift or spin, accelerate to a moderate speed and then turn the handlebars sharply while applying the brake briefly. Practice in an open, safe area.

Image: A child wearing a helmet and protective gear riding the Razor Power Rider 360.

Image: Close-up of the dual inclined rear caster wheels, designed for drifting.

Imatge: Una imatge superior view of a child performing a controlled drift on the Power Rider 360.

6. Manteniment

Regular maintenance ensures the longevity and safe operation of your Power Rider 360.

Cura de la bateria:

• Always recharge the battery immediately after each use.
• Charge the battery at least once a month, even if the product is not in use, to prevent deep discharge.
• Emmagatzemeu el producte en un lloc fresc i sec, lluny de la llum solar directa i de temperatures extremes.

Tire and Wheel Maintenance:

• Check the front pneumatic tire pressure regularly and inflate to the recommended PSI (indicated on the tire sidewall).
• Inspect the rear caster wheels for wear or damage. Replace if necessary.

General Cleaning and Inspection:

• Clean the Power Rider 360 with a damp tela. No utilitzeu productes químics aggressivs ni netejadors abrasius.
• Regularly inspect all nuts, bolts, and fasteners to ensure they are tight.
• Check the brake system for proper function and adjust if needed.
• Inspect the chain and motor for any debris or signs of wear.

7. Solució De Problemes

If you encounter issues with your Power Rider 360, refer to the following common troubleshooting steps:

If these steps do not resolve the issue, please contact Razor customer support for further assistance.

8. Especificacions

• Dimensions del producte: 35.5 x 24.25 x 35.5 polzades (90.17 x 61.60 x 90.17 cm)
• Pes de l'article: 32.8 lliures (14.88 kg)
• Número de model: 20136491
• Edat recomanada: 8 - 18 anys
• Pes màxim del genet: 120 lliures (54 kg)
• Bateria: 12V Sealed Lead Acid (included)
• Temps de càrrega de la bateria: 12 hours (initial and subsequent charges)
• Temps d'ús continu: Fins a 40 minuts
• Velocitat màxima: Fins a 9 mph (14 km/h)
• Material del marc: Acer soldat
• Roda davantera: Hi-impact pneumatic
• Rodes posteriors: Dual inclined casters

9. Garantia i Suport

For warranty information, product registration, or to purchase replacement parts, please visit the official Razor weblloc web o contacteu directament amb el seu servei d'atenció al client. Conserveu el comprovant de compra per a reclamacions de garantia.

Fabricant: Razor USA, LLC

Informació de contacte: Refer to the official Razor website or product packaging for the most current support details.