Introducció
The Movo LV1 is a versatile omnidirectional lavalier microphone designed for clear and accurate voice reproduction. It is compatible with a wide range of devices, including cameras, camcorders, smartphones, and audio recorders, making it suitable for vlogging, interviews, presentations, and other audio recording applications.
Contingut del paquet
Si us plau, verifiqueu que tots els elements que s'enumeren a continuació estiguin inclosos al vostre paquet:
- Movo LV1 Lavalier Microphone with 6-meter (20ft) cable
- Clip de solapa
- Parabrisa d’escuma
- LR44 Battery (may be pre-installed or included separately)
- Targeta de garantia

Image: The Movo LV1 lavalier microphone showing its 20ft cable, clip, and foam windscreen, highlighting its versatile design.
Configuració
1. Instal·lació de la bateria
The Movo LV1 requires one LR44 battery for operation in 'CAMERA' mode. For 'OFF/Smartphone' mode, the microphone typically draws power from the smartphone and does not require the battery.
- Locate the power module on the microphone cable.
- Unscrew the two halves of the power module to access the battery compartment.
- Insert one LR44 battery with the positive (+) side facing up.
- Carefully screw the power module back together, ensuring a secure fit.
2. Connectar el micròfon
Use the included lapel clip to attach the microphone to your clothing. For optimal sound quality, position the microphone approximately 6-8 inches (15-20 cm) from the speaker's mouth, ideally on a lapel or collar.
3. Instal·lació del parabrisa
Gently slide the foam windscreen over the microphone capsule. The windscreen helps to reduce plosive sounds (like 'p' and 'b') and minimize wind noise during outdoor recordings.
4. Connexió al vostre dispositiu
The Movo LV1 features a 3.5mm TRRS connector for broad compatibility.
- Per a telèfons intel·ligents: Plug the 3.5mm connector directly into your smartphone's audio jack. Ensure the switch on the power module is set to 'OFF/Smartphone'.
- For Cameras, Camcorders, and Audio Recorders: Plug the 3.5mm connector into your device's microphone input. Set the switch on the power module to 'CAMERA'. This mode requires the LR44 battery to be installed and functional.

Image: A person plugging the Movo LV1 microphone's 3.5mm jack into a smartphone, illustrating the 'Plug & Play' setup for mobile devices.

Image: Diagram showing the Movo LV1 microphone's compatibility with various devices including cameras, smartphones, and audio recorders, highlighting its versatility.
Instruccions de funcionament
1. Encès i apagat
The power module on the microphone cable has a switch with two positions:
- OFF/Smartphone: Use this setting when connecting to a smartphone. The microphone will draw power from the smartphone.
- CÀMERA: Use this setting when connecting to a camera, camcorder, or audio recorder. This mode requires the LR44 battery to be installed and powered.
2. Gravació d'àudio
- Ensure the microphone is securely clipped to the speaker and the windscreen is in place.
- Connect the microphone to your recording device and set the power module switch to the appropriate position (OFF/Smartphone or CAMERA).
- Open your recording application or activate recording on your camera/audio recorder.
- Perform a test recording to check audio levels and quality before your main recording session. Adjust input levels on your device as needed.
- Begin your recording.

Imatge: Un primer pla view of the Movo LV1 microphone, illustrating its omnidirectional pickup pattern for high-quality audio capture.

Image: A person using the Movo LV1 microphone while vlogging with a camera, demonstrating its application for content creation.
Manteniment
Neteja
To clean your Movo LV1 microphone, gently wipe the body with a soft, dry cloth. Do not use liquid cleaners, solvents, or abrasive materials, as these can damage the microphone's components.
Canvi de bateria
If you notice a decrease in audio quality or the microphone fails to power on in 'CAMERA' mode, it may be time to replace the LR44 battery. Follow the battery installation steps outlined in the Setup section.
Emmagatzematge
When not in use, store the microphone in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage.
Resolució de problemes
- Sense so o volum baix:
- Ensure the microphone's 3.5mm connector is fully inserted into your device's audio input.
- Verify the power module switch is set correctly for your device (OFF/Smartphone or CAMERA).
- If in 'CAMERA' mode, check if the LR44 battery is installed correctly and has sufficient charge. Replace if necessary.
- Check your recording device's input settings and volume levels.
- So distorsionat o poc clar:
- Ensure the microphone is not too close to the sound source, which can cause clipping. Maintain an optimal distance of 6-8 inches.
- Check your device's recording levels; reduce them if they are too high.
- If in 'CAMERA' mode, a low battery can cause distortion. Replace the LR44 battery.
- Soroll de fons excessiu:
- Ensure the foam windscreen is properly installed to reduce plosives and light wind noise.
- Avoid rubbing the microphone or its cable against clothing during recording.
- Record in a quiet environment to minimize ambient noise.
Especificacions
| Model | LV1 |
| Patró polar | Omnidireccional |
| Connectivitat | 3.5mm Jack (Auxiliary) |
| Font d'alimentació | Wired Electric (1 x LR44 battery required for camera mode) |
| Longitud del cable | 6 metres (aprox. 20 peus) |
| Sensibilitat d'àudio | 65 decibels |
| Ràtio senyal / soroll | 58 dB |
| Dispositius compatibles | Camcorder, Camera, Smartphone, Audio Recorder, Tablet |
| Color | Negre |
| Pes | 132 g |

Image: A diagram illustrating an omnidirectional polar pattern, indicating that the microphone captures sound equally from all directions.
Garantia i Suport
Informació de la garantia
The Movo LV1 Lavalier Microphone comes with a 1 any de garantia des de la data de compra. Aquesta garantia cobreix els defectes de fabricació i garanteix que el producte compleix els estàndards de rendiment especificats. Conserveu el comprovant de compra per a reclamacions de garantia.
Atenció al client
For technical assistance, troubleshooting, or warranty inquiries, please contact Movo's friendly US-based customer support team. Refer to the warranty card included in your package or visit the official Movo weblloc per obtenir dades de contacte.




