PeakTech 3385 Analog Multimeter Instruction Manual

1. Introducció

The PeakTech 3385 is a robust analog multimeter designed for a variety of electrical measurements. This versatile device is suitable for both professional and educational use, offering functions such as AC/DC voltage, AC/DC current, resistance, continuity testing, and dB measurements. Its analog display provides clear readings, and the durable, non-slip housing ensures protection against impacts.

This manual provides essential information for the safe and effective operation of your PeakTech 3385 multimeter. Please read it thoroughly before use and keep it for future reference.

2. Informació de seguretat

Always observe the following safety precautions to prevent electric shock or damage to the meter:

• The PeakTech 3385 is rated for CAT III 600 V. Do not attempt to measure voltages exceeding this rating.
• Before making any measurements, ensure the function switch is set to the correct range.
• No mesureu mai el voltage with the test leads connected to the current input terminals (mA/A).
• Inspect test leads for damaged insulation or exposed metal before each use. Replace damaged leads immediately.
• No utilitzeu el mesurador si sembla danyat o si la carcassa està oberta.
• Aneu amb compte quan treballeu amb volumtagper sobre de 30 V CA RMS, 42 V pic o 60 V CC. Aquests voltagsuposen un risc de xoc.
• Desconnecteu sempre l'alimentació del circuit i descarregueu totes les emissions d'alt volum.tage capacitors before performing resistance or continuity tests.
• Canvieu les piles tan bon punt aparegui l'indicador de bateria baixa per garantir lectures precises.

Figura 2.1: The PeakTech 3385 features a robust, non-slip housing for enhanced safety and durability.

3. Configuració

3.1 Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• Multímetre analògic PeakTech 3385
• Cables de prova (vermell i negre)
• Bossa de transport
• 3 piles AAA de 1.5 V
• Manual d'usuari

Figura 3.1: The complete package includes the multimeter, test leads, batteries, carrying bag, and user manual.

3.2 Instal·lació de la bateria

The PeakTech 3385 requires three 1.5V AAA batteries for operation. These are primarily used for resistance and continuity measurements, as voltage and current measurements do not require battery power.

1. Localitzeu la tapa del compartiment de la bateria a la part posterior del multímetre.
2. Utilitzeu un tornavís per obrir el compartiment de la bateria.
3. Insert three 1.5V AAA batteries, observing the correct polarity (+/-) as indicated inside the compartment.
4. Substituïu la tapa del compartiment de la bateria i fixeu-la amb el cargol.

3.3 Producte acabatview

Familiaritzeu-vos amb els components principals del vostre multímetre:

• Pantalla analògica: Features a 75 mm mirror scale for precise readings and to minimize parallax error.
• Function/Range Selector Dial: Used to select the desired measurement function (V, A, Ω, dB) and range.
• Preses d'entrada:
• COM (Comú): For the black test lead.
• VΩmA: For the red test lead when measuring voltage, resistance, or current up to 500mA.
• 10A: For the red test lead when measuring current up to 10A.
• Ω ADJ (Zero Adjustment): Knob used to zero the needle for resistance measurements.

Figura 3.2: Front panel of the PeakTech 3385 multimeter.

Figura 3.3: The versatile function and range selector dial.

Figura 3.4: Detail of the 4mm safety sockets, analog mirror scale, and resistance zero adjustment.

4. Instruccions de funcionament

The PeakTech 3385 offers 20 different measurement ranges. Always select a range higher than the expected value to prevent damage to the meter.

4.1 Mesurar DC Voltage (DCV)

1. Introduïu el cable de prova negre al COM presa i el cable de prova vermell al VΩmA jack.
2. Set the function switch to the desired DCV range (e.g., 15V, 60V, 150V, 600V). Start with the highest range if the voltage es desconeguda.
3. Connecteu els cables de prova al component o circuit que s'ha de mesurar.
4. Llegeix el voltage value from the appropriate DCV scale on the analog display.

4.2 Mesurar AC Voltage (ACV)

1. Introduïu el cable de prova negre al COM presa i el cable de prova vermell al VΩmA jack.
2. Set the function switch to the desired ACV range (e.g., 15V, 60V, 150V, 600V). Start with the highest range if the voltage es desconeguda.
3. Connecteu els cables de prova al component o circuit que s'ha de mesurar.
4. Llegeix el voltage value from the appropriate ACV scale on the analog display.

4.3 Measuring DC Current (DCA)

Precaució: Always connect the meter in series with the circuit. Never connect it in parallel across a voltage source when measuring current.

1. Introduïu el cable de prova negre al COM jack.
2. For currents up to 500mA, insert the red test lead into the VΩmA jack. For currents up to 10A, insert the red test lead into the 10A jack.
3. Set the function switch to the desired DCA range (e.g., 100µA, 10mA, 500mA, 10A).
4. Obriu el circuit on es vol mesurar el corrent i connecteu el mesurador en sèrie.
5. Read the current value from the appropriate DCA scale.

4.4 Mesura de la resistència (Ω)

Precaució: Assegureu-vos que el circuit estigui desenergitzat i que tots els condensadors estiguin descarregats abans de mesurar la resistència.

1. Introduïu el cable de prova negre al COM presa i el cable de prova vermell al VΩmA jack.
2. Set the function switch to the desired Ω range (e.g., x1, x10, x100, x1k).
3. Short the test leads together. Adjust the Ω ADJ knob until the needle points exactly to zero on the resistance scale.
4. Connecteu els cables de prova al component que s'ha de mesurar.
5. Read the resistance value from the Ω scale and multiply by the range factor.

4.5 Prova de continuïtat

The continuity test provides an audible indication for low resistance circuits.

1. Introduïu el cable de prova negre al COM presa i el cable de prova vermell al VΩmA jack.
2. Set the function switch to the continuity symbol (often indicated by a speaker icon).
3. Connect the test leads across the circuit or component. If continuity exists (low resistance), the meter will emit an audible tone.

Figura 4.1: The PeakTech 3385 is a practical measuring device for various applications.

5. Manteniment

5.1 Neteja

Per netejar el mesurador, netegeu la carcassa amb aiguaamp drap i un detergent suau. No utilitzeu abrasius ni dissolvents. Assegureu-vos que el mesurador estigui completament sec abans d'utilitzar-lo.

5.2 Substitució de la bateria

When the meter's display indicates a low battery, or if resistance/continuity functions become unreliable, replace the batteries as described in Section 3.2.

5.3 Canvi de fusibles

The PeakTech 3385 is equipped with internal fuses to protect against overcurrent. If the current measurement function stops working, the fuse may need replacement. This procedure should only be performed by qualified personnel.

1. Ensure the meter is turned off and all test leads are disconnected.
2. Obriu la tapa del compartiment de la bateria a la part posterior del mesurador.
3. Carefully remove the old fuse(s). Note the ratings: one for 500mA MAX and another for 10A MAX.
4. Replace with fuses of the exact same type and rating. Using incorrect fuses can compromise safety and damage the meter.
5. Tanqueu la tapa del compartiment de la bateria i assegureu-la.

6. Solució De Problemes

If you encounter issues with your PeakTech 3385, refer to the following common problems and solutions:

• No reading or erratic reading:
  • Comproveu la càrrega de la bateria i substituïu-la si cal.
  • Assegureu-vos que els cables de prova estiguin connectats correctament al mesurador i al circuit.
  • Verify the function switch is set to the correct measurement type and range.
  • Inspect test leads for damage or poor connections.
• Resistance/Continuity not working:
  • Assegureu-vos que les bateries estiguin noves i instal·lades correctament.
  • Perform the zero adjustment for resistance measurements.
  • Confirm the circuit under test is de-energized.
• La mesura de corrent no funciona:
  • Check if the appropriate fuse (500mA or 10A) has blown and replace if needed (refer to Section 5.3).
  • Ensure the meter is connected in series with the circuit.

If the problem persists after attempting these solutions, contact PeakTech customer support.

7. Especificacions

8. Garantia i Suport

8.1 Garantia

The PeakTech 3385 Analog Multimeter comes with a Garantia del fabricant de 3 anys des de la data de compra. Aquesta garantia cobreix els defectes de materials i fabricació en condicions d'ús normal. No cobreix els danys causats per mal ús, accidents, modificacions no autoritzades o negligència.

8.2 Atenció al client

For technical assistance, warranty claims, or service inquiries, please contact PeakTech customer support through their official website or the contact information provided with your purchase documentation. Please have your model number (P 3385) and proof of purchase ready when contacting support.