Introducció
This manual provides detailed instructions for the safe and efficient operation, setup, and maintenance of your ADJ Fog Fury 3000 Professional Fog Machine. Please read this manual thoroughly before operating the device to ensure proper usage and to prevent damage or injury.
The ADJ Fog Fury 3000 is a high-output fogger designed for professional applications, featuring DMX control capabilities and robust construction. It is engineered to produce dense, consistent fog for various entertainment and event settings.
Informació de seguretat
Always observe the following safety precautions to reduce the risk of electric shock, fire, or personal injury:
- Ensure the unit is connected to a grounded power supply.
- No feu funcionar la unitat si el cable d'alimentació està danyat.
- Use only ADJ Water-Based Fog Fluids. Other fluids may cause damage or create a health hazard.
- No submergiu la unitat en aigua ni altres líquids.
- Mantingueu la unitat allunyada de materials inflamables.
- Assegureu-vos que hi hagi una ventilació adequada al voltant de la unitat durant el funcionament.
- Do not block the fog output nozzle.
- Allow the unit to cool down completely before handling or storing.
- Mantenir fora de l'abast dels nens.
- Refer to the Proposition 65 warning for California residents regarding potential chemical exposure.
Desembalatge i configuració inicial
Carefully unpack the ADJ Fog Fury 3000 and inspect it for any signs of damage during transit. If any damage is observed, contact your dealer immediately.
Contingut del paquet:
- ADJ Fog Fury 3000 Fog Machine
- Comandament a distància per cable
- Cable d'alimentació
- Manual d'usuari (aquest document)
Col·locació:
Place the fog machine on a flat, stable surface. Ensure there is sufficient space around the unit for proper ventilation. Do not place the unit directly on carpet or other soft surfaces that may block ventilation openings.
Imatge: Anvers view of the ADJ Fog Fury 3000 Fog Machine, showing the fog output nozzle and fluid tank.
Fluid Tank Installation:
- Unscrew the cap of the fluid tank located on the top of the unit.
- Carefully pour ADJ Water-Based Fog Fluid into the tank. Do not overfill. The tank has an LED light for easy visibility in dark environments.
- Securely screw the cap back onto the fluid tank.
- Ensure the fluid hose inside the tank is fully submerged in the fog fluid.
Imatge: Part posterior view of the ADJ Fog Fury 3000, displaying the DMX LCD display, power switch, and various input/output ports.
Instruccions de funcionament
Encès:
- Connect the power cable to the unit and then to a suitable grounded power outlet.
- Flip the main power switch located on the rear panel to the "ON" position.
- The unit will begin its warm-up cycle, which takes approximately 8 minutes. The status indicator on the unit or remote will change when ready.
Modes de control:
The Fog Fury 3000 offers multiple control options:
1. Mode manual:
- Connect the wired remote control to the designated port on the rear of the unit.
- Press and hold the button on the remote to manually activate fog output. Release the button to stop.
Image: The ADJ FF23WR Wireless Remote, which is sold separately, shown with its receiver and connection cable. This remote allows for wireless operation of the fog machine.
2. Timer Mode:
- The wired remote typically includes timer functions. Refer to the remote's specific instructions for setting interval, duration, and volume.
3. DMX Control:
The Fog Fury 3000 is DMX operational via 3-pin DMX connections. It utilizes 3 DMX channels.
- Connect a DMX controller to the DMX IN port on the rear of the unit.
- Set the DMX address using the LCD display and buttons on the rear panel. Refer to the DMX channel chart below for specific functions.
Gràfic de canals DMX:
| Canal | Funció | Interval de valors | Descripció |
|---|---|---|---|
| 1 | Sortida de boira | 0-255 | 0 = Off, 1-255 = Fog Output (increasing intensity) |
| 2 | Funcions especials | 0-255 | Reserved for future functions or specific modes (refer to advanced DMX manual if available) |
| 3 | Strobe/Pulse | 0-255 | 0 = Off, 1-255 = Strobe/Pulse effect (increasinvelocitat g) |
For detailed DMX programming, consult your DMX controller's manual.
Manteniment
Regular maintenance ensures the longevity and optimal performance of your Fog Fury 3000.
Neteja:
- Exterior: Netegeu l'exterior amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
- Dipòsit de fluids: Periodically empty and rinse the fluid tank with distilled water to prevent residue buildup.
- Broquet: If the fog output appears weak or inconsistent, the nozzle may be partially clogged. Use a small brush or compressed air to gently clear any obstructions.
Gestió de fluids:
- Always use high-quality, water-based fog fluid recommended by ADJ.
- Do not mix different types of fog fluid.
- Store fog fluid in a cool, dark place, away from direct sunlight.
- The unit features an automatic circuit cut-off to protect the pump if the fog fluid tank runs dry. However, it is best practice to ensure sufficient fluid before operation.
Emmagatzematge:
Before storing the unit for extended periods, run a small amount of distilled water through the system to clean the pump and heater coil. This helps prevent mineral buildup. Store the unit in a cool, dry place.
Resolució de problemes
If you encounter issues with your Fog Fury 3000, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Sense sortida de boira | No power; Unit not warmed up; No fog fluid; Clogged nozzle/pump; Remote not connected. | Check power connection; Wait for warm-up (approx. 8 min); Refill fluid tank; Clean nozzle/pump; Ensure remote is securely connected. |
| Weak or inconsistent fog | Low fluid level; Incorrect fluid type; Partially clogged nozzle/pump; Unit not fully heated. | Refill fluid; Use ADJ water-based fluid; Clean nozzle/pump; Allow unit to fully heat. |
| La unitat no respon a DMX | Incorrect DMX address; Faulty DMX cable; DMX controller issue; DMX termination. | Verify DMX address setting; Test with a different DMX cable; Check DMX controller; Ensure proper DMX termination if using multiple units. |
| Unit overheats or shuts off | Insufficient ventilation; Fluid tank empty (safety cut-off). | Ensure adequate airflow around the unit; Refill fluid tank. |
If the problem persists after attempting these solutions, contact ADJ customer support.
Especificacions
Detailed technical specifications for the ADJ Fog Fury 3000:
- Model: FOG FURY 3000
- Consum d'energia: 1500 W (màxim 1600 W)
- Temps d'escalfament: Uns 8 minuts
- Sortida de boira: 21,000 peus cúbics per minut (CFM)
- Capacitat del dipòsit de fluids: 5 litres
- Control: Manual, Timer (via wired remote), 3-pin DMX (3 channels)
- Dimensions: 18.75" x 13.75" x 12.75"
- Pes: 25 lliures.
- Característiques de seguretat: Electronic Thermal Sensing Technology, Automatic Circuit Cut-off (dry tank protection)
- Aprovacions: Aprovat per ETL
Garantia i Suport
Informació de la garantia:
ADJ Products provides a limited warranty for its products. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ADJ Products weblloc web. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
Atenció al client:
For technical assistance, service, or parts inquiries, please contact ADJ Products customer support. You can find contact information on the official ADJ weblloc web o a través del vostre distribuïdor autoritzat.
ADJ Products Official Weblloc: www.adj.com
