Introducció
This manual provides instructions for the proper installation, operation, and maintenance of your Jones Stephens A01-021 Aerators. Please read these instructions carefully before installation and retain them for future reference. These aerators are designed to regulate water flow and conserve water in compatible faucets.
Informació de seguretat
- Always turn off the water supply to the faucet before attempting any installation or maintenance.
- Use appropriate tools and avoid over-tightening to prevent damage to the aerator or faucet.
- Mantingueu les peces petites allunyades dels nens per evitar perills d'asfixia.
- Ensure proper disposal of old aerators and packaging materials.
Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- Six (6) Jones Stephens A01-021 Aerators
- Clear plastic storage tube
This image displays six Jones Stephens A01-021 aerators, each featuring a metallic body with a light green O-ring, neatly arranged inside a transparent plastic tube. The tube is sealed with a purple cap on one end. These aerators are designed for faucet installation to regulate water flow.
Configuració i instal·lació
Follow these steps to install your new aerator:
- Tanqueu el subministrament d'aigua: Locate the shut-off valves under your sink and turn them clockwise to completely stop the water flow to the faucet.
- Remove Existing Aerator: Most aerators can be unscrewed by hand. If it is too tight, use an aerator wrench or pliers with a cloth to avoid scratching the faucet finish. Turn counter-clockwise to remove.
- Clean Faucet Spout: Inspect the faucet spout for any debris or mineral buildup. Clean thoroughly to ensure a proper seal with the new aerator.
- Identify Thread Type: The Jones Stephens A01-021 aerators feature dual threads: 15/16"-27 male x 55/64"-27 female. Determine if your faucet has male or female threads and select the appropriate side of the aerator for installation.
- Install New Aerator: Screw the new aerator onto the faucet spout clockwise. Hand-tighten only. Do not use tools to over-tighten, as this can damage the aerator or faucet.
- Restaurar el subministrament d'aigua: Slowly turn the water supply valves counter-clockwise to restore water flow.
- Comproveu si hi ha fuites: Turn on the faucet and check for any leaks around the aerator connection. If a leak occurs, gently tighten the aerator a small amount until the leak stops.
Instruccions de funcionament
Once installed, the aerator operates automatically with your faucet. Simply turn on the faucet as usual. The aerator will mix air into the water stream, providing a consistent, splash-free flow while conserving water.
Manteniment
Regular cleaning of your aerator is recommended to maintain optimal water flow and prevent mineral buildup.
- Freqüència de neteja: Clean the aerator every 3-6 months, or more frequently in areas with hard water.
- Passos de neteja:
- Tanqueu el subministrament d'aigua a l'aixeta.
- Unscrew the aerator from the faucet spout.
- Disassemble the aerator components (screen, washer, flow restrictor).
- Rinse all components under running water to remove loose debris.
- For stubborn mineral deposits, soak the components in a solution of equal parts white vinegar and water for 30 minutes to an hour.
- Use a small brush (like an old toothbrush) to gently scrub away any remaining deposits.
- Rinse thoroughly and reassemble the aerator, ensuring all components are correctly seated.
- Screw the cleaned aerator back onto the faucet spout and restore water supply.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Baix cabal d'aigua | Clogged aerator screen due to mineral buildup or debris. | Remove and clean the aerator as described in the Maintenance section. |
| Water leaks around the aerator | Aerator not tightened sufficiently, damaged washer, or incorrect installation. | Gently tighten the aerator. If leaking persists, remove, inspect the washer for damage, and re-install carefully. Replace the washer if damaged. |
| Aerator does not fit | Incorrect thread size for your faucet. | Verify your faucet's thread type and size. The A01-021 features 15/16"-27 male x 55/64"-27 female dual threads. |
Especificacions
- Número de model: A01021
- Marca: Jones Stephens
- Tipus de fil: Dual thread (15/16"-27 male x 55/64"-27 female)
- Quantitat: 6 aerators per tube
- Material: Construcció sense plom
- Pes de l'article: Approximately 0.16 ounces (per tube)
- Dimensions del producte: Aproximadament 8 x 6 x 6 polzades (embalatge)
Garantia
Jones Stephens products are manufactured to high-quality standards. For specific warranty information, please refer to the official Jones Stephens weblloc web o contacteu directament amb el seu servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra.
Suport
For further assistance, technical support, or to inquire about replacement parts, please contact Jones Stephens customer service through their official website or the contact information provided with your purchase. When contacting support, please have your product model number (A01-021) available.
