Makita HM1306 30mm Demolition Hammer Instruction Manual

1. Introducció

This manual provides essential information for the safe and effective operation, maintenance, and setup of your Makita HM1306 30mm Demolition Hammer. Please read this manual thoroughly before using the tool to ensure proper handling and to prevent injury or damage.

The Makita HM1306 is a robust demolition hammer designed for heavy-duty chipping operations. It features high durability, a soft grip for enhanced control and reduced fatigue, and an adjustable large side handle for improved operator comfort. Its design ensures minimum power loss during chipping, even when the bull point is continuously applied against concrete.

Figure 1: Makita HM1306 30mm Demolition Hammer. This image displays the main unit of the demolition hammer, highlighting its robust construction and ergonomic design, including the main handle and the adjustable side handle.

2. Instruccions de seguretat

Always observe the following fundamental safety precautions when operating the Makita HM1306 Demolition Hammer to reduce the risk of electric shock, fire, and serious injury.

• Llegeix el manual: Familiaritzeu-vos amb totes les instruccions i advertències abans d'utilitzar-lo.
• Seguretat de l'àrea de treball: Mantingueu la vostra zona de treball neta i ben il·luminada. Les zones desordenades o fosques conviden als accidents. No feu servir eines elèctriques en atmosferes explosives, com ara en presència de líquids, gasos o pols inflamables.
• Seguretat elèctrica: Power tool plugs must match the outlet. Never modify the plug. Avoid body contact with earthed or grounded surfaces (e.g., pipes, radiators, ranges, refrigerators). Do not expose power tools to rain or wet conditions.
• Seguretat personal: Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, dust mask, and heavy-duty gloves. Dress properly; avoid loose clothing or jewelry. Secure long hair.
• Ús i cura de l'eina: No forceu l'eina elèctrica. Feu servir l'eina elèctrica adequada per a la vostra aplicació. Desconnecteu l'endoll de la font d'alimentació abans de fer qualsevol ajust, canviar accessoris o guardar eines elèctriques.
• Mantenir les eines: Keep cutting tools sharp and clean. Follow instructions for lubricating and changing accessories. Inspect power tool cords periodically and have them repaired if damaged.
• Estigueu alerta: Watch what you are doing, use common sense, and do not operate a power tool while you are tired or under the influence of drugs, alcohol, or medication.

3. Contingut del paquet

Upon unpacking your Makita HM1306 Demolition Hammer, ensure all the following items are present and undamaged:

• Makita HM1306 Demolition Hammer Unit
• Bull Point (Chisel Bit)
• Clau anglesa
• Tirador lateral
• Oil Supply (100mL)
• Manual d'instruccions (aquest document)

Si falta algun article o està danyat, poseu-vos en contacte amb el vostre distribuïdor immediatament.

4. Configuració

Follow these steps to prepare your demolition hammer for operation.

4.1 Fixació de la nansa lateral

1. Afluixa el clamp bolt on the side handle by turning it counter-clockwise.
2. Slide the side handle onto the barrel of the demolition hammer.
3. Adjust the handle to a comfortable and secure position for your grip.
4. Apretar el clamp bolt securely by turning it clockwise to fix the handle in place. Ensure it does not rotate freely.

4.2 Installing the Bull Point (Chisel Bit)

1. Assegureu-vos que l'eina estigui desconnectada de la font d'alimentació.
2. Clean the shank of the bull point and apply a small amount of grease to it.
3. Pull back the tool holder cover (if present) or rotate the locking mechanism.
4. Insert the bull point into the tool holder until it clicks into place.
5. Release the tool holder cover or locking mechanism. Pull on the bull point to ensure it is securely locked.

4.3 Connexió a l'alimentació

1. Verify that the power switch on the tool is in the “OFF” position.
2. Plug the power cord into a suitable electrical outlet (220-240V AC, 50/60Hz). Ensure the outlet is properly grounded.

5. Instruccions de funcionament

Proper operation ensures efficiency and safety.

5.1 Inici i aturada de l'eina

• Començar: Press the trigger switch. For continuous operation, press the trigger switch and then push in the lock button.
• Parar: Release the trigger switch. To stop continuous operation, press the trigger switch fully, then release it.

5.2 Chipping Operation

1. Hold the tool firmly with both hands, using the main handle and the side handle. Maintain a balanced stance.
2. Position the bull point against the material to be chipped.
3. Start the tool and apply moderate pressure. Allow the tool to do the work; excessive force can reduce efficiency and cause premature wear.
4. Guide the tool along the desired line of demolition. The HM1306 is designed to maintain chipping performance even under continuous pressure.
5. Avoid hitting rebar or other embedded metal objects directly, as this can damage the bit and the tool.

5.3 Working Posture

Maintain a stable and comfortable working posture. Ensure your feet are shoulder-width apart for balance. Avoid overreaching. The adjustable side handle allows you to find the most ergonomic position for various tasks.

6. Manteniment

Un manteniment regular garanteix la longevitat i el rendiment òptim de la vostra eina.

6.1 Neteja

• After each use, unplug the tool and clean off any dust, dirt, or debris from the tool body, ventilation openings, and bit holder. Use a dry cloth or compressed air.
• No utilitzeu productes químics agressius ni netejadors abrasius, ja que poden danyar les peces de plàstic.

6.2 Lubricació

• The HM1306 requires periodic lubrication. Refer to the specific instructions in the included oil supply documentation for the correct procedure and frequency.
• Use only the specified Makita oil or an equivalent high-quality lubricant.

6.3 Inspecció

• Cable d'alimentació: Regularly inspect the power cord for any cuts, abrasions, or damage. If damaged, have it repaired by a qualified service center.
• Escombretes de carbó: The carbon brushes are wear items. When they wear down, the motor may stop or run intermittently. Have them inspected and replaced by a Makita authorized service center when necessary.
• Elements de fixació: Check all mounting screws and fasteners for tightness. Tighten any loose screws.

7. Solució De Problemes

Aquesta secció tracta els problemes habituals que podeu trobar amb el vostre martell de demolició.

For issues not listed or if solutions do not resolve the problem, contact a Makita authorized service center.

8. Especificacions

Key technical specifications for the Makita HM1306 Demolition Hammer:

9. Garantia i Suport

Makita products are manufactured under strict quality control standards. In the unlikely event of a defect due to faulty materials or workmanship, please refer to the warranty terms provided at the time of purchase.

For service, repairs, or technical assistance, please contact an authorized Makita service center. Using non-authorized parts or service may void your warranty and compromise tool safety.

Informació de contacte del fabricant:

MAKITA POWER TOOLS INDIA PVT LTD
Unit II, Sy. No.93/3 93/4, Koralur Village,
Kasaba Hobli, Hoskote Taluk, Bangalore – 560 067, India
Telèfon: +91-80-2205-8200
Correu electrònic: sales@makita.in