1. Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your Powerbass S-60C 6.5-inch Component OEM Replacement Speaker system. Please read this manual thoroughly before attempting installation or operation to ensure proper function and longevity of your product.
Figure 1: Powerbass S-60C Component Speaker System
2. Informació de seguretat
Observe the following safety guidelines during installation and operation:
- Desconnecteu sempre la bateria del vehicle abans de començar qualsevol instal·lació elèctrica.
- Assegureu-vos que tot el cablejat estigui correctament aïllat per evitar curtcircuits.
- Mount speakers securely to prevent them from becoming loose during vehicle operation.
- Avoid installing speakers in locations that obstruct vehicle controls or safety devices.
- Do not operate the speakers at excessively high volumes for prolonged periods, as this may cause hearing damage or speaker damage.
- If you are unsure about any part of the installation process, consult a qualified professional car audio installer.
3. Contingut del paquet
Verifiqueu que tots els elements siguin presents al vostre paquet:
- 6.5-inch Woofers (2)
- Tweeters (2)
- Crossover Networks (2)
- Maquinari de muntatge (cargols, clips, etc.)
Figure 2: Individual Component Speaker Set
4. Configuració i instal·lació
The Powerbass S-60C is a component speaker system designed for OEM replacement. Proper installation is critical for optimal performance. Professional installation is recommended.
4.1 Component acabatview
Your S-60C system includes:
- Woofer: The 6.5-inch speaker responsible for mid-range and bass frequencies.
- Tweeter: The smaller speaker designed for high-frequency sounds.
- Xarxa creuada: This device separates the audio signal, sending appropriate frequencies to the woofer and tweeter.
Figure 3: S-60C Woofer
Figure 4: S-60C Tweeters
4.2 Muntatge
The 6.5-inch woofers are designed for flush mounting in standard vehicle speaker locations. The tweeters can be flush-mounted or surface-mounted depending on your vehicle's interior and desired sound staging. Ensure adequate clearance behind the mounting surface for the speaker's magnet structure.
Figure 5: S-60C Woofer Dimensions
4.3 Cablejat
Each component set requires connection to a crossover network. The crossover has clearly marked terminals for 'INPUT' (from amplifier), 'WOOFER' (to woofer), and 'TWEETER' (to tweeter). Observe correct polarity (+ and -) for all connections to ensure proper sound reproduction.
- Connecteu el amplifier's speaker output to the 'INPUT' terminals on the crossover network.
- Connect the woofer to the 'WOOFER' terminals on the crossover network.
- Connect the tweeter to the 'TWEETER' terminals on the crossover network.
Use appropriate gauge speaker wire for all connections. Consult your vehicle's wiring diagram or a professional installer if you are unsure about speaker wire routing or connections.
5. Instruccions de funcionament
Once installed, your Powerbass S-60C speakers will operate as part of your vehicle's audio system. Ensure your amplifier's gain settings are properly adjusted to prevent distortion and speaker damage. The speakers have a maximum output power of 140 Watts and an impedance of 4 Ohm. Avoid exceeding these limits.
For optimal sound quality, consider adjusting the equalizer settings on your head unit or amplifier to complement the acoustic characteristics of your vehicle's interior.
6. Manteniment
The Powerbass S-60C speakers require minimal maintenance. Follow these guidelines:
- Keep the speaker cones free from dust and debris. Use a soft, dry cloth for cleaning.
- Avoid exposing speakers to excessive moisture or direct sunlight for prolonged periods.
- Comproveu regularment totes les connexions del cablejat per verificar si estan ben ajustades i si hi ha corrosió.
- Do not apply any chemicals or solvents to the speaker components.
7. Solució De Problemes
If you experience issues with your Powerbass S-60C speakers, refer to the following table:
| Problema | Causa possible | Solució |
|---|---|---|
| No hi ha so de l'altaveu | Cablejat fluix o incorrecte; Amplifier off or faulty; Head unit issue; Speaker damaged. | Check all wiring connections and polarity. Verify amplifier and head unit are functioning. Test speaker with another audio source if possible. |
| So distorsionat | Amplifier gain too high; Incorrect crossover settings; Speaker damaged; Poor quality audio source. | Reduir amplifier gain. Ensure crossover is correctly wired. Check audio source quality. If distortion persists, speaker may be damaged. |
| Un altaveu no funciona | Wiring issue to that specific speaker or crossover; Speaker damaged. | Inspect wiring to the non-working speaker and its crossover. Swap speakers (if safe) to determine if the issue is with the speaker or wiring/crossover. |
If troubleshooting steps do not resolve the issue, contact Powerbass customer support or a qualified service technician.
8. Especificacions
| Característica | Detall |
|---|---|
| Nom del model | S-60C |
| Tipus d'altaveu | Component |
| Mida de l'altaveu | 6.5 polzades (altaveu de greus) |
| Material | 2 layer paper DDC cone / silk dome tweeter |
| Impedància | 4 ohms |
| Potència de sortida màxima dels altaveus | 140 watts |
| Resposta de freqüència | 60 Hz (Lower limit) |
| Tipus de muntatge | Muntatge d'escorredor |
| Dimensions del producte | 4" de profunditat x 17.6" d'amplada x 10" d'alçada (embalatge) |
| Pes de l'article | 1 lliures (per conjunt) |
| Components inclosos | Car Speakers - Component Systems |
9. Garantia i Suport
Your Powerbass S-60C speakers come with a Limited or Full Warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Powerbass weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.
For technical support, service, or questions regarding your product, please contact Powerbass customer service directly. Contact information can typically be found on the Powerbass weblloc o embalatge del producte.
