Introducció
This manual provides comprehensive instructions for the Gingko GK15R8 Digital Click Clock. Please read this manual carefully before use to ensure proper operation and to fully utilize all features of your new clock. This digital clock is designed to display time, date, and temperature with a white LED display, activated by sound or continuous power.
Característiques del producte
- Displays time, date, and temperature with automatic switching.
- Activates through sound detection (e.g., a clap or tap) or can be set for continuous display.
- Three independent alarm settings with snooze function.
- Option for 5-day (weekday) or 7-day (every day) alarm activation.
- LED display with dimming capability.
Configuració
Contingut del paquet
Assegureu-vos que hi hagi tots els elements:
- Gingko GK15R8 Digital Click Clock
- Cable d'alimentació USB
- Manual d'instruccions (aquest document)
Alimentació del rellotge
The clock can be powered via the included USB cable or by batteries (if installed).
- Potència USB: Connect the USB cable to the DC5V/0.5A port on the back of the clock and plug the other end into a compatible USB power adapter (not included) or a computer USB port.
- Potència de la bateria: Insert 3 AAA batteries (not included) into the battery compartment on the back of the clock, observing correct polarity. Battery power is primarily for backup or temporary use, as continuous display will drain batteries quickly.

Davant view of the Gingko GK15R8 Digital Click Clock, showcasing its wood-grain finish and the bright red LED display showing "10:32".

posterior view of the Gingko GK15R8 Digital Click Clock, showing the control buttons labeled "SET", "UP", "DOWN", and "V/S", along with the DC5V/0.5A power input port and branding.
Instruccions de funcionament
Funcions del botó
- SET: Enters setting mode, confirms selections, and moves to the next setting option.
- AMUNT: Increases values or navigates up through options.
- BAIX: Decreases values or navigates down through options.
- V/S (Veu/So): Toggles sound activation mode or adjusts display brightness.
Configuració de l'hora i la data
- Premeu el botó SET Premeu el botó una vegada per entrar al mode de configuració de l'hora. Els dígits de les hores parpellejaran.
- Utilitza el UP or ABAIX botons per ajustar l'hora.
- Premeu SET again to confirm the hour and move to minute setting. The minute digits will flash.
- Utilitza el UP or ABAIX botons per ajustar els minuts.
- Premeu SET again to confirm minutes and move to year setting.
- Continue this process, using Amunt/Avall per ajustar i SET to confirm, for Year, Month, and Day.
- After setting the Day, press SET one last time to exit the time/date setting mode.
Visualització de la temperatura
The clock automatically cycles between time, date, and temperature display. The temperature is shown in Celsius or Fahrenheit, depending on the selected unit.

The Gingko GK15R8 Digital Click Clock displaying the temperature "20°C" in a room setting, highlighting its temperature display feature.
Sound Activation Mode
In sound activation mode, the display will turn off when the room is quiet to save energy. To activate the display, make a sound (e.g., a clap, tap on the clock, or speak loudly).
- Premeu el botó V/S button to toggle between sound activation mode (display turns off) and continuous display mode (display stays on).
- When the display is off, a sound will activate it for approximately 10-15 seconds before it turns off again.
Configuració d'alarma
The clock features three independent alarms (A1, A2, A3).
- Premeu el botó SET button repeatedly until you see "A1" displayed.
- Premeu SET again to enter Alarm 1 setting. The hour digits will flash.
- Ús Amunt/Avall per configurar l'hora de l'alarma i, a continuació, premeu SET.
- Ús Amunt/Avall to set the alarm minutes, then press SET.
- You will then see options for alarm activation: "--:A1" (Alarm 1 OFF), "ON:A1" (Alarm 1 ON for 7 days), or "E:A1" (Alarm 1 ON for 5 days - weekdays only). Use Amunt/Avall to select your preference, then press SET.
- Repeat steps 1-5 for Alarm 2 (A2) and Alarm 3 (A3).
- To stop a sounding alarm, press any button. To activate snooze, press the ABAIX button during the alarm.

The Gingko GK15R8 Digital Click Clock displaying the time "12:02" in a bedroom setting, demonstrating its time display function.
Manteniment
To ensure the longevity and proper functioning of your Gingko GK15R8 Digital Click Clock, follow these maintenance guidelines:
- Neteja: Wipe the clock surface with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the finish and internal components.
- Col·locació: Col·loca el rellotge sobre una superfície estable i plana, allunyada de la llum solar directa, de temperatures extremes i d'alta humitat.
- Substitució de la bateria: If using battery power, replace all batteries simultaneously when the display dims or functions become erratic. Do not mix old and new batteries or different types of batteries.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Clock display is off or dim. | Sound activation mode is active; low battery; power disconnected. | Make a sound to activate display. Check USB power connection. Replace batteries if using battery power. Press V/S button to toggle continuous display. |
| L'alarma no sona. | Alarm is not set or is set to OFF; incorrect alarm time. | Verify alarm settings (A1, A2, A3) are set to "ON" or "E" and the time is correct. |
| Difficulty setting time/alarms. | Seqüència de botons incorrecta. | Refer to the "Operating Instructions" section for detailed steps. Ensure you press SET to confirm each step. |
| La lectura de temperatura és inexacta. | Clock placed near heat source or vent. | Trasllada el rellotge a una zona amb una temperatura ambient estable. |
Especificacions
- Marca: Gingko
- Número de model: GK15R8
- Color: Black (Note: Product images may show a wood-effect finish)
- Dimensions del producte: 15 x 4.5 x 10 cm
- Potència/Wattage: 11 watts-hora
- Material: Wood-effect finish
- Característiques especials: Calendar display, Alarm, Snooze, Sound Activation
- Font d'alimentació: USB (DC5V/0.5A) or 3x AAA Batteries (not included)
- Tipus de visualització: Digital LED (White LED display as per product description)
Garantia i Suport
For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. You may also visit the official Gingko weblloc per obtenir més ajuda.





