Manual d'usuari del sistema d'altaveus de components de 2 vies Focal ISS-200 de 8 polzades

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your Focal ISS-200 8-inch 2-Way Component Speaker System. Please read this manual thoroughly before attempting installation or operation to ensure proper function and longevity of your speakers. The Focal ISS-200 system is designed to deliver high-fidelity audio performance in a vehicle environment.

2. Informació de seguretat

Observeu sempre les següents precaucions de seguretat durant la instal·lació i el funcionament:

• Disconnect the vehicle's battery before beginning any electrical work to prevent short circuits.
• Assegureu-vos que tot el cablejat estigui correctament aïllat i fixat per evitar danys per vibracions o vores afilades.
• Do not install speakers in locations that obstruct airbags, driver visibility, or vehicle controls.
• Use appropriate tools and personal protective equipment during installation.
• Consulteu un instal·lador professional si teniu dubtes sobre alguna part del procés d'instal·lació.
• Avoid prolonged exposure to high volume levels, which can cause hearing damage.

3. Contingut del paquet

Verifiqueu que tots els elements que s'enumeren a continuació siguin presents al vostre paquet:

• Dos (2) altaveus de greus de 8 polzades
• Two (2) Inverted Dome Tweeters (with pre-attached speaker wire)
• Two (2) Surface Mount Tweeter Housings (pre-installed)
• Two (2) Angled Surface Mount Tweeter Housings
• Two (2) 19-inch Lengths of Speaker Wire with In-line Tweeter Crossovers
• Two (2) 7-inch Lengths of Speaker Wire with In-line Woofer Crossovers
• Two (2) Foam Woofer Gaskets
• Eight (8) Speed Clips
• Four (4) 7/8-inch Flathead Screws
• Eight (8) 1-inch Self-tapping Screws
• Owner's Manual (English/French)
• Focal Window Sticker

This image displays the user manual, various screws, and speed clips included with the Focal ISS-200 component speaker system, essential for installation.

4. Instal·lació

The Focal ISS-200 system is designed for straightforward installation, featuring built-in crossovers for simplified wiring. However, professional installation is recommended for optimal performance and to avoid damage to your vehicle or the speakers.

4.1 Woofer Installation

The 8-inch woofers are designed with a shallow mounting depth of 2.5 inches (63.5 mm), allowing for compatibility with various vehicle door panels. Ensure the mounting location provides adequate clearance and is free from obstructions. The woofers feature built-in crossovers, simplifying the wiring process by eliminating the need for external crossover units.

This image shows the two 8-inch woofers from the Focal ISS-200 component speaker system, highlighting their design and size.

Aquesta imatge proporciona una view of the rear of the Focal ISS-200 woofers, illustrating their magnet assembly and connection terminals.

4.2 Tweeter Installation

The inverted dome tweeters can be installed using either the surface mount housings (pre-installed) or the angled surface mount housings, depending on your vehicle's interior and desired sound staging. The compact size of the tweeters allows for flexible mounting options. Connect the tweeters using the provided speaker wire with in-line crossovers.

This image displays the two inverted dome tweeters included in the Focal ISS-200 system, featuring their grilles.

This image illustrates the different tweeter mounting housings available for the Focal ISS-200, offering flexibility for installation.

4.3 Cablejat

The Focal ISS-200 system utilizes in-line crossovers for both woofers and tweeters. Connect the provided speaker wires to the corresponding components and then to your amplifier or head unit outputs. Ensure correct polarity (+/-) for all connections to maintain proper sound reproduction.

This image shows the speaker wiring provided with the Focal ISS-200, featuring integrated in-line crossovers for simplified connection.

5. Funcionament

Once properly installed, the Focal ISS-200 component speaker system is ready for use. These speakers are designed to be driven by a car audio amplifier or a head unit with sufficient power output. The system has a nominal impedance of 4 ohms and can handle up to 80 Watts RMS (Root Mean Square) and 160 Watts maximum power.

5.1 Initial Power-Up and Testing

1. After completing all wiring, reconnect the vehicle's battery.
2. Turn on your car audio system at a low volume level.
3. Gradually increase the volume and listen for clear, balanced sound from all speakers.
4. Check for any distortion or unusual noises. If present, immediately reduce volume and re-check wiring connections.

5.2 Ajust de so

Utilize your head unit's or amplifier's equalizer and balance/fader controls to fine-tune the sound to your preference. The ISS-200 system offers a frequency response from 40Hz to 20kHz, providing a wide range of audio reproduction.

6. Manteniment

The Focal ISS-200 speakers require minimal maintenance. Follow these guidelines to ensure their longevity:

• Keep the speakers free from dust and debris. Use a soft, dry cloth for cleaning.
• Avoid exposing the speakers to excessive moisture or direct sunlight for prolonged periods.
• Regularly check wiring connections for tightness and corrosion, especially after significant vehicle vibrations or temperature changes.
• Do not apply any chemical cleaners or solvents to the speaker cones or surrounds.

7. Solució De Problemes

If you experience issues with your Focal ISS-200 speaker system, refer to the following common troubleshooting steps:

7.1 No Sound from Speakers

• Comproveu la potència: Assegureu-vos el vostre amplifier or head unit is receiving power and is turned on.
• Verifica les connexions: Inspect all speaker wires for secure connections at both the speaker and amplifier/head unit ends. Check for any loose or disconnected wires.
• Comprova la polaritat: Incorrect wiring polarity can cause phase issues, leading to weak or no sound. Ensure positive (+) and negative (-) terminals are correctly matched.
• Examine Fuses: Check the fuses on your amplificador o unitat principal.

7.2 Distorted or Unclear Sound

• Nivell de volum: Reduïu el volum. Sovint es produeix distorsió quan ampL'amplificador o els altaveus estan saturats.
• Configuració de guany: Si s'utilitza un extern amplifier, ensure the gain settings are properly adjusted. Too high a gain can cause clipping and distortion.
• Configuració de l'equalitzador: Adjust your head unit's or amplifier's equalizer settings. Extreme bass or treble boosts can introduce distortion.
• Integritat del cablejat: Check speaker wires for any damage, fraying, or short circuits.
• Muntatge d'altaveus: Ensure speakers are securely mounted and not vibrating against vehicle panels.

7.3 Imbalanced Sound (One Speaker Louder/Softer)

• Balance/Fader Control: Ajusteu els controls de balanç i fader de la unitat principal.
• Cablejat: Check the wiring for the affected speaker. A loose connection or incorrect polarity can cause reduced output.
• Danys de l'altaveu: Inspect the speaker cone and surround for any visible damage.

8. Especificacions

Technical specifications for the Focal ISS-200 8-inch 2-Way Component Speaker System:

9. Garantia i Suport

Focal products are manufactured to high-quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims.

For technical assistance, warranty service, or further information, please contact your authorized Focal dealer or visit the official Focal website. Do not attempt to repair the speakers yourself, as this may void the warranty.