Introducció
Producte acabatview
The Shure SM35-XLR is a performance headset condenser microphone designed for hands-free audio capture. It is suitable for multi-instrumentalists and active performers, providing clear vocal reproduction in various live sound environments.
Image: The Shure SM35-XLR Performance Headset Condenser Microphone, featuring the headset frame, microphone boom, and integrated preamp.
Característiques clau
- Integrated Shure RPM626 preamp with 3-pin XLR output.
- Wireframe headset design for secure and comfortable fit during active use.
- Unidirectional cardioid polar pattern for effective rejection of off-axis sound and feedback.
- Flexible gooseneck for precise microphone placement.
- Lightweight and low-profile form factor for extended wear.
- Snap-fit windscreens to reduce plosives and breath noise.
- Tailored frequency response for clear vocal reproduction.
Guia de configuració
Desembalatge
Verify that the following components are included in the package:
- 1 Shure SM35-XLR Headset Microphone
- 2 parabrises
- 1 Headset Clip
- 1 RPM626 Preamp
Connexió del micròfon
- Connect the SM35-XLR headset cable to the RPM626 preamp.
- Connect the 3-pin XLR output of the RPM626 preamp to an XLR input on your mixer or audio interface.
- Ensure that the connected device provides alimentació fantasma (typically +48V). Condenser microphones require phantom power to operate. Refer to your mixer or audio interface manual for instructions on enabling phantom power.
Portant els auriculars
Position the headset securely on your head. Adjust the wireframe for a comfortable and stable fit. The flexible gooseneck allows for precise positioning of the microphone element near your mouth.
Image: A person wearing the Shure SM35-XLR headset microphone, demonstrating proper placement of the microphone element near the mouth.
Funcionament
Col·locació del micròfon
Adjust the flexible gooseneck to position the microphone element approximately 1-2 inches from the corner of your mouth. This placement helps optimize vocal capture and minimize breath noise. Experiment with slight adjustments to find the ideal position for your voice and performance style.
Sound Considerations
The SM35-XLR features a unidirectional (cardioid) polar pattern, which primarily picks up sound from the front of the microphone while rejecting sound from the sides and rear. This characteristic is beneficial for reducing feedback on loud stages and minimizing signal bleed from other instruments or monitors.
Manteniment
Neteja
To maintain optimal performance and hygiene, regularly clean the headset and microphone element. Use a soft, dry cloth to wipe down the headset frame. For the microphone element, gently clean the windscreen. Avoid using harsh chemicals or abrasive materials.
Substitució del parabrisa
The SM35-XLR includes snap-fit windscreens designed to protect the microphone element and reduce plosive sounds. If a windscreen becomes damaged or worn, replace it with a new one. Replacement windscreens are typically available from authorized Shure dealers.
Resolució de problemes
Sense sortida de so
- Comproveu les connexions: Ensure all cables (headset to preamp, preamp to mixer) are securely connected.
- Verifiqueu l'alimentació fantasma: Confirm that +48V phantom power is enabled on the mixer or audio interface input channel connected to the microphone.
- Nivell d'entrada: Check the input gain on your mixer. It may be set too low.
- Integritat del cable: Test with a different XLR cable if possible to rule out a faulty cable.
Problemes de retroalimentació
- Col·locació del micròfon: Ensure the microphone is positioned correctly and not too close to loudspeakers or monitors.
- Volum del monitor: Reduce the volume of stage monitors if feedback occurs.
- Igualació: Use an equalizer on your mixer to cut frequencies that are causing feedback.
Àudio distorsionat
- Guany d'entrada: Reduce the input gain on your mixer or audio interface. The signal may be too strong, causing clipping.
- Distància del micròfon: If the microphone is too close to the sound source, it can cause distortion. Adjust placement slightly further away.
Especificacions tècniques
| Model | SM35-XLR |
| Tipus de micròfon | Condensador |
| Patró polar | Unidireccional (cardioide) |
| Connectivitat | XLR (via RPM626 preamp) |
| Font d'alimentació | Phantom Power (+48V DC) |
| Sensibilitat d'àudio | 130 decibels |
| Ràtio senyal / soroll | 78 dB |
| Resposta de freqüència | 20 KHz (upper limit) |
| Pes de l'article | 0.4 lliures (6.4 unces) |
| Dimensions del producte (L x A x A) | 3.2 x 7.6 x 6.4 polzades |
| Material | Metal Alloy or High-Quality Plastic |
Image: Diagram illustrating the approximate dimensions of the Shure SM35-XLR headset microphone.
Garantia i Suport
Informació de la garantia
For detailed warranty information, please refer to the official Shure Warranty Document. You can access the PDF document aquí.
Recursos addicionals
A comprehensive User Manual (PDF) is available for further details on the Shure SM35-XLR. Access the full manual aquí.
For technical support or service inquiries, please visit the official Shure weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.
