KRUPS MS-622735

KRUPS Dolce Gusto Water Tank MS-622735 for Piccolo Instruction Manual

Model: MS622735

Introducció

This manual provides instructions for the proper installation, operation, and maintenance of your KRUPS Dolce Gusto Water Tank MS-622735. This water tank is a genuine replacement part specifically designed for KRUPS Dolce Gusto Piccolo coffee machines, ensuring optimal performance and compatibility.

Instruccions de seguretat

  • Always ensure the coffee machine is unplugged before installing or removing the water tank.
  • Use only clean, fresh water in the tank.
  • Do not use the water tank if it appears damaged or cracked. Replace it immediately.
  • Keep the water tank out of reach of children.
  • This water tank is designed for use with KRUPS Dolce Gusto Piccolo machines only. Using it with other models may cause damage or improper function.

Contingut del paquet

  • 1x KRUPS Dolce Gusto Water Tank MS-622735

Instal·lació

Follow these steps to properly install the replacement water tank into your KRUPS Dolce Gusto Piccolo coffee machine:

  1. Unplug the Machine: Ensure your Dolce Gusto Piccolo coffee machine is unplugged from the power outlet before proceeding.
  2. Treure el dipòsit antic (si escau): If replacing an existing tank, gently pull the old water tank straight up and away from the back of the coffee machine.
  3. Posició del nou tanc: Align the new KRUPS Dolce Gusto Water Tank MS-622735 with the water tank slot at the back of your Piccolo machine.
  4. Insert Tank: Carefully push the water tank down into the slot until it sits firmly and securely in place. You should feel it click or settle into position. Ensure there are no gaps between the tank and the machine body.
  5. Verifica l'ajust: Gently try to lift the tank slightly to confirm it is properly seated and stable.
KRUPS Dolce Gusto Water Tank MS-622735

Image: The KRUPS Dolce Gusto Water Tank MS-622735. This transparent plastic tank is designed to fit securely into the back of compatible Dolce Gusto Piccolo coffee machines, serving as the reservoir for water.

Operation (Filling and Placement)

To use your water tank effectively, follow these guidelines:

  1. Remove for Filling: Gently lift the water tank straight up from the coffee machine.
  2. Omplir amb aigua: Open the lid of the water tank and fill it with fresh, clean drinking water. Do not exceed the maximum fill line indicated on the tank.
  3. Tanca la tapa: Securely close the lid of the water tank.
  4. Re-insert Tank: Place the filled water tank back into its designated slot on the coffee machine, ensuring it is firmly seated as described in the Installation section.
  5. Comproveu si hi ha fuites: After re-inserting, visually inspect for any immediate leaks around the base of the tank.

Manteniment i Neteja

Regular cleaning of your water tank is essential for hygiene and optimal coffee taste:

  • Esbandida diària: After each day of use, remove the water tank, empty any remaining water, and rinse it thoroughly with warm water.
  • Neteja setmanal: Once a week, wash the water tank with warm, soapy water. Use a soft brush or sponge to clean the interior. Rinse thoroughly to remove all soap residue.
  • Assecat: Allow the water tank to air dry completely before re-inserting it into the machine, or wipe it dry with a clean cloth.
  • Eviteu productes químics durs: No utilitzeu netejadors abrasius, dissolvents ni productes químics agressius, ja que poden danyar el plàstic.
  • Descalcificació: The water tank itself does not require descaling, but follow your coffee machine's descaling instructions for the machine's internal components.

Resolució de problemes

If you encounter issues with your water tank, consider the following:

  • Fuga d'aigua:
    • Ensure the water tank is correctly seated and pushed down firmly into the machine.
    • Check the tank for any visible cracks or damage. If damaged, replace the tank.
    • Verify that the rubber seal at the bottom of the tank (if present) is clean and intact.
  • Tank Not Fitting Properly:
    • Ensure no obstructions are in the water tank slot on the coffee machine.
    • Confirm you have the correct model (MS-622735) for your Dolce Gusto Piccolo machine.
  • No Water Flow from Tank:
    • Ensure the tank is filled with water and properly seated.
    • Check the water inlet valve at the bottom of the tank for any blockages.
    • If the issue persists, the problem might be with the coffee machine itself, not the water tank. Refer to your coffee machine's manual.

Especificacions

CaracterísticaDetall
Número de model de l'articleMS-622735
ASINB00J35WW8G
Tipus de materialPlàstic
Nom del colorTransparent
Pes de l'article8.4 unces
Data de primera disponibilitat25 d'agost de 2012

Garantia i Suport

For information regarding warranty coverage or technical support for your KRUPS Dolce Gusto Water Tank MS-622735, please refer to the documentation provided with your original Dolce Gusto Piccolo coffee machine or visit the official KRUPS website. You may also contact KRUPS customer service directly for assistance with replacement parts.

KRUPS Official Weblloc: www.krups.com