1. Introducció
This manual provides essential instructions for the safe installation, operation, and maintenance of the Fulham FHS2-UNV-36L Emergency LED Driver. This device is designed to provide emergency power to LED luminaires in the event of a normal power failure, ensuring illumination for a specified duration. Please read this manual thoroughly before installation or use and retain it for future reference.
2. Informació de seguretat
ADVERTIMENT: To reduce the risk of death, personal injury, or property damage from fire, electric shock, falling parts, cuts, abrasions, and other hazards, read all warnings and instructions included with and on the fixture box and all fixture labels. All electrical work must be performed by a qualified electrician in accordance with all applicable national and local electrical codes.
- Desconnecteu l'alimentació al fusible o al disjuntor abans de la instal·lació o el manteniment.
- Assegureu-vos que l'entrada voltage to the emergency driver matches the specified range (100-277V AC).
- No instal·leu a prop d'escalfadors de gas o elèctrics.
- No utilitzeu aquest equip per a un altre ús que el previst.
- This product is designed for use with specific LED loads. Refer to specifications for compatibility.
- The emergency driver requires a separate battery backup unit (not included) for emergency operation. Ensure the battery unit is compatible and correctly installed.
3. Producte acabatview
The Fulham FHS2-UNV-36L is an emergency LED driver designed to convert standard LED luminaires into emergency lighting fixtures. It provides constant power output to the LED load during a power outage, ensuring continuous illumination for a minimum of 90 minutes. This unit operates with a universal input voltage range and is suitable for various commercial and industrial applications.
- Model: FHS2-UNV-36L
- Funció: Controlador de LED d'emergència
- Durada de l'emergència: 90 minuts mínim
- Entrada Voltage: 100-277V AC
- Vol. De sortidatage: 11-36V DC
- Potència de sortida màxima: 20 watts
- Còpia de seguretat de la bateria: Not included (requires external battery pack)
4. Configuració i instal·lació
Installation must be performed by a qualified electrician in compliance with all national and local electrical codes. Ensure power is disconnected before beginning any installation work.
4.1 Instruccions de cablejat
- Desconnexió d'alimentació: Turn off the main power supply to the circuit where the emergency driver will be installed. Verify power is off using a voltage provador.
- Muntatge: Mount the FHS2-UNV-36L emergency driver securely within the fixture or in an accessible location, ensuring proper ventilation. The unit has a rectangular aluminum housing.
- Connexió d'entrada de CA: Connect the AC input wires of the emergency driver to the unswitched AC power supply (100-277V). Typically, this involves connecting the black wire to Line, white wire to Neutral, and green wire to Ground.
- Connexió de la bateria: Connect the emergency driver to a compatible external battery backup unit (e.g., Fulham FHSBATL6-3, if applicable). Ensure correct polarity (positive to positive, negative to negative). The product description states the battery backup is not included with the FHS2-UNV-36L.
- LED Load Connection: Connect the output wires of the emergency driver to the LED load. Observe correct polarity for the LED module. The output voltagEl rang és de 11-36 V CC.
- Test Switch/Indicator: If applicable, connect the test switch and charge indicator light according to the wiring diagram provided with the battery backup unit. This allows for manual testing of the emergency function.
- Restauració d'energia: Once all connections are secure and verified, restore power to the circuit. The charge indicator light should illuminate, indicating the battery is charging.
Note: Always refer to the specific wiring diagram provided with your complete emergency lighting system for detailed connection instructions.
5. Instruccions de funcionament
The Fulham FHS2-UNV-36L Emergency LED Driver operates automatically. No user intervention is required during normal operation or during a power outage.
- Mode normal: When AC power is present, the emergency driver's battery unit (if connected) will charge. The LED luminaire operates normally, powered by the standard AC supply.
- Mode d'emergència: Upon interruption of normal AC power, the emergency driver automatically switches to emergency mode. It draws power from the connected battery backup unit and supplies power to the LED load, illuminating the fixture for a minimum of 90 minutes.
- Torna a la normalitat: When AC power is restored, the emergency driver automatically returns to normal mode, and the battery unit begins recharging.
5.1 Testing Emergency Function
Regular testing is crucial to ensure the emergency lighting system is functioning correctly.
- Prova mensual: Press the test switch (if installed) for at least 30 seconds. The LED luminaire should operate in emergency mode. Release the switch; the luminaire should return to normal operation.
- Prova anual: Conduct a full 90-minute discharge test annually. Disconnect AC power to the emergency driver for 90 minutes. The LED luminaire should remain illuminated for the entire duration. After the test, restore AC power and allow the battery to fully recharge (typically 24 hours).
6. Manteniment
The Fulham FHS2-UNV-36L Emergency LED Driver is designed for minimal maintenance. However, periodic checks are recommended to ensure optimal performance.
- Neteja: Keep the unit clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquid cleaners.
- Inspecció: Periodically inspect the wiring for any signs of damage, loose connections, or corrosion.
- Substitució de la bateria: The lifespan of the external battery backup unit varies. If the unit fails to maintain illumination for the full 90-minute duration during an annual test, the battery may need replacement. Refer to the battery manufacturer's instructions for replacement procedures.
7. Solució De Problemes
If the emergency LED driver is not functioning as expected, refer to the following troubleshooting guide:
| Problema | Causa possible | Solució |
|---|---|---|
| LED luminaire does not illuminate in emergency mode. | No AC power to the emergency driver. Battery not charged or faulty. Cablejat incorrecte. Faulty LED load. | Comproveu el disjuntor i les connexions del cablejat. Allow 24 hours for battery to charge. If problem persists, replace battery. Verify all wiring connections according to the diagram. Test LED load with a known good power source. |
| Emergency illumination duration is less than 90 minutes. | La bateria no està completament carregada. Bateria a punt d'arribar al final de la seva vida útil. Incompatible LED load. | Ensure battery has had sufficient time to charge (24 hours). Replace the battery backup unit. Verify LED load specifications are within the driver's output range. |
| Charge indicator light is off. | No AC power to the emergency driver. Faulty indicator light or wiring. La bateria no està connectada. | Comproveu la font d'alimentació de CA. Inspect indicator light and its connections. Ensure battery is properly connected. |
If troubleshooting steps do not resolve the issue, contact Fulham customer support or a qualified electrician.
8. Especificacions
| Característica | Especificació |
|---|---|
| Número de model | FHS2-UNV-36L |
| Entrada Voltage | 100-277V AC |
| Vol. De sortidatage | 11-36V DC |
| Potència de sortida màxima | 20 watts |
| Ampedat | 0.07 Amps |
| Hora d’operació d’emergència | 90 minuts mínim |
| Dimensions (L x A x A) | 10.25" x 1.5" x 1.25" (26.04 cm x 3.81 cm x 3.18 cm) |
| Pes | 9.9 unces (0.28 kg) |
| Material | Alumini |
| Tipus de muntatge | Muntatge en rack |
| Bateria inclosa | No |
| UPC | 847098011026 |
9. Garantia i Suport
Fulham products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty statement provided with your purchase or visit the official Fulham website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Fulham customer service.
Fulham Contact Information:
Si us plau, visiteu www.fulham.com per obtenir les dades de contacte i els recursos d'assistència més actualitzats.
