GEFU Tempico 12340 5-in-1 Timer Instruction Manual

Introducció

The GEFU Tempico 12340 is a versatile 5-in-1 digital timer designed for various timing needs in the kitchen and beyond. It features five individually adjustable timers, a clear alarm signal, and can also display the current time and date when not in use. Its integrated magnets and foldable stand offer flexible placement options.

Image: The GEFU Tempico 12340 5-in-1 Timer. This digital timer features a black body with a silver-colored frame and a red-backlit display. The screen shows five distinct timer sections labeled T1, T2, T3, T4, and an 'OVEN' timer, each displaying different time values. Below the screen are control buttons for setting and operating the timers, including rewind, play/pause, fast forward, and a mode/clock button. The device is shown with its integrated stand extended, allowing it to sit upright.

Configuració

1. Instal·lació de la bateria: The timer is powered by batteries. Locate the battery compartment on the back of the device. Insert the required batteries (type not specified, typically AAA or AA) according to the polarity indicators (+/-). Close the battery compartment securely.
2. Engegada inicial: After battery installation, the device should power on automatically. If not, press the power button (if available) or any button to activate the display.
3. Col·locació:
   • Enganxament magnètic: Utilize the integrated magnets on the back of the timer to attach it to metallic surfaces such as refrigerators or oven hoods.
   • Suport plegable: For placement on flat surfaces, extend the foldable stand located on the back of the device to prop it upright.

Instruccions de funcionament

1. Setting Clock and Date:

   When the timer is not actively counting down, it displays the current time and date. Refer to the device's buttons (e.g., 'Mode' or 'Clock' button, often indicated by a clock icon) to enter the setting mode. Use the adjustment buttons (e.g., 'M' for minutes, 'H' for hours, or arrow keys) to set the correct time and date. Confirm settings as per on-screen prompts.

2. Selecting a Timer:

   The device features five independent timers (T1, T2, T3, T4, and OVEN). Use the designated timer selection button (if available, or cycle through timers using a specific button) to choose which timer you wish to set or activate.
3. Configuració d'un temporitzador:

   Once a timer is selected, use the 'M' (minutes) and 'H' (hours) buttons, or similar arrow keys, to adjust the desired countdown duration. Timers can be set from 1 minute up to 99 hours. Press the 'Play/Pause' button (often a triangle icon) to start the countdown.

4. Starting and Stopping Timers:

   Press the 'Play/Pause' button to start the selected timer. Press it again to pause the timer. To reset a timer, typically hold down the 'Play/Pause' button or use a dedicated reset function.

5. Funció d'alarma:

   When a timer reaches zero, a clear alarm signal will sound. To silence the alarm, press any button. The alarm duration may vary.
6. Canvi de modes de visualització:

   The device can switch between displaying active timers and the current clock/date. Use the mode button (often indicated by a clock or hourglass icon) to toggle between these displays.

Manteniment

• Neteja: Per netejar el temporitzador, netegeu-lo amb un drap suau iamp cloth. Do not use abrasive cleaners or immerse the device in water. Ensure the device is dry before storage or next use.
• Substitució de la bateria: When the display dims or the device malfunctions, it may be time to replace the batteries. Follow the battery installation steps outlined in the "Setup" section. Dispose of old batteries responsibly.
• Emmagatzematge: Store the timer in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.

Resolució de problemes

• La pantalla està en blanc o apagada:

  Check battery installation and ensure batteries are fresh. Replace batteries if necessary.

• Els botons no responen:

  Ensure the device is not in a locked mode (if applicable). Try removing and reinserting the batteries to perform a soft reset.

• Alarm is Too Quiet:

  The alarm volume is fixed. Ensure the timer is placed in a location where the alarm can be clearly heard. There is no volume adjustment feature on this model.
• Timer Does Not Hold Settings After Countdown:

  This model does not automatically save the last set time after a countdown completes. Each timer needs to be set manually for each new use.

Especificacions

Garantia i Suport

For information regarding warranty coverage, product support, or spare parts, please contact GEFU customer service directly. Specific warranty terms may vary by region and retailer. Please retain your proof of purchase for warranty claims.

You can typically find contact information for GEFU on their official weblloc web o a través del venedor on es va comprar el producte.