1. Informació de seguretat

Read and understand all instructions before operating the TRAC Angler 30 AutoDeploy-G3 Electric Anchor Winch. Failure to follow these instructions may result in product damage, property damage, or serious injury.

• Keep hands away from moving parts: Ensure hands, clothing, and other objects are clear of the rope and winch drum during operation.
• Use safety cable when underway: Always secure the anchor with the provided safety chain or cable when the boat is in motion to prevent accidental deployment or loss.
• Stow anchor in boat when trailering: For transport, ensure the anchor is fully retrieved and secured within the boat, not hanging from the winch.
• Desconnexió d'alimentació: Disconnect power to the winch when performing maintenance or when the winch is not in use for extended periods.
• Advertència de la proposta 65: Aquest producte pot contenir materials advertits per la Proposició 65 de Califòrnia.

2. Producte acabatview

The TRAC Angler 30 AutoDeploy-G3 Electric Anchor Winch is designed for automatic anchor deployment and retrieval, supporting anchors up to 30 lb. It features a durable all-steel gear motor for reliable performance.

Components inclosos:

• TRAC Angler 30 AutoDeploy-G3 Electric Anchor Winch
• 100-feet of 3/16-inch pre-wound braided anchor rope
• Automatic resetting circuit breaker
• Sealed membrane switch (control panel)
• Comandament a distància sense fil
• 14-gauge marine-grade battery wire (17-feet in length)
• Anchor safety chain
• Ferreteria de muntatge

Note: Anchor is not included and must be purchased separately.

3. Especificacions

4. Configuració i instal·lació

Proper installation is crucial for the safe and effective operation of your anchor winch. Always ensure your boat's mounting surface is strong enough to support the winch and anchor forces.

Passos d'instal·lació (directrius generals):

1. Trieu la ubicació de muntatge: Select a flat, reinforced area on your boat's bow or stern that allows for clear anchor deployment and retrieval, and easy access to the control panel.
2. Assegurar el cabrestant: Use the provided assembly hardware to securely mount the winch unit to the chosen location. Ensure all bolts are tightened appropriately.
3. Connectar l'alimentació: Route the 14-gauge marine-grade battery wire to your boat's 12V battery. Connect the positive (+) wire to the positive terminal and the negative (-) wire to the negative terminal. Install the automatic resetting circuit breaker as per the included instructions to protect the system.
4. Attach Anchor: Securely attach your anchor (not included) to the carabiner at the end of the pre-wound anchor rope.
5. Install Anchor Safety Chain: Attach the anchor safety chain to the anchor and a secure point on your boat to prevent accidental deployment or loss during transport or high-speed operation.

5. Instruccions de funcionament

The TRAC Angler 30 AutoDeploy-G3 offers convenient anchor control via its sealed membrane switch and wireless remote.

Ús del tauler de control:

• Deploy Anchor: Manteniu premut el botó ABAIX button (or the anchor symbol button for auto-deploy) to lower the anchor. The winch will automatically stop when the anchor reaches the bottom and the rope tension decreases.
• Retrieve Anchor: Manteniu premut el botó UP button to raise the anchor. Release the button once the anchor is fully retrieved and secured.

Using the Wireless Remote:

The wireless remote provides convenient operation from anywhere on your boat.

• Encès/apagat: Use the ON/OFF buttons to activate or deactivate the remote.
• Deploy Anchor: Premeu el botó ABAIX button to lower the anchor.
• Retrieve Anchor: Premeu el botó UP button to raise the anchor.
• Funció de bloqueig: Use the LOCK button to prevent accidental operation.

6. Manteniment

Regular maintenance ensures the longevity and reliable performance of your anchor winch.

• Inspeccionar la corda: Periodically check the anchor rope for fraying, cuts, or excessive wear. Replace if necessary.
• Comproveu les connexions elèctriques: Ensure all battery and winch connections are clean, tight, and free of corrosion.
• Clean Winch Unit: Wipe down the winch exterior with a damp cloth to remove salt, dirt, and debris. Avoid using harsh chemicals.
• Lubricació: Refer to the detailed product manual for any specific lubrication requirements for internal components.

7. Solució De Problemes

If you encounter issues with your TRAC Angler 30 AutoDeploy-G3 Electric Anchor Winch, consult the following common troubleshooting steps:

• Winch Not Operating:
  • Comproveu si les connexions de la bateria estan ben ajustades i presenten algun signe de corrosió.
  • Verify the circuit breaker has not tripped. Reset if necessary.
  • Ensure the wireless remote has fresh batteries and is properly paired (refer to remote instructions).
• Anchor Not Deploying/Retrieving Smoothly:
  • Inspect the anchor rope for tangles or obstructions.
  • Ensure the anchor roller is clear of debris.
  • Confirm the anchor weight does not exceed the 30 lb. maximum capacity.
• Wireless Remote Issues:
  • Substituïu les piles del comandament a distància.
  • Assegureu-vos que no hi hagi fonts d'interferència fortes a prop.
  • If the remote is damaged or unresponsive, consider using the sealed membrane switch on the winch unit.

For persistent issues, contact TRAC Outdoor Products customer support.

8. Garantia i Suport

The TRAC Angler 30 AutoDeploy-G3 Electric Anchor Winch (Model 69004) includes a garantia limitada d'un any des de la data de compra. Aquesta garantia cobreix els defectes de materials i de mà d'obra en ús normal.

For warranty claims, technical assistance, or replacement parts, please contact TRAC Outdoor Products customer support directly. Keep your proof of purchase for warranty validation.

For the most up-to-date contact information and detailed warranty terms, please visit the official Trac weblloc web o consulteu la documentació inclosa amb el producte.