Aiphone GT-BCX Expanded Audio Bus Control Unit User Manual

1. Introducció

The Aiphone GT-BCX Expanded Audio Bus Control Unit is designed to enhance the functionality of the GT Series Multi-Tenant Intercom system. This unit provides expanded audio bus control, facilitating communication within complex multi-tenant environments. It operates on a 24V DC power source and is engineered for DIN rail mounting, ensuring seamless integration into existing setups. This manual provides essential information for the proper installation, operation, and maintenance of your GT-BCX unit.

2. Informació de seguretat

Please read and understand all safety instructions before installing or operating the GT-BCX unit. Failure to follow these instructions may result in injury, damage to the product, or voiding of the warranty.

Font d'alimentació: Only use the specified 24V DC power source. Connecting to an incorrect voltagpot fer malbé la unitat.
Instal·lació: Installation should be performed by qualified personnel in accordance with all local electrical codes and regulations.
Medi ambient: Do not expose the unit to moisture, extreme temperatures, or direct sunlight. Ensure adequate ventilation.
Cablejat: Ensure all wiring is correctly connected and secured to prevent short circuits or loose connections.
Manteniment: Desconnecteu l'alimentació abans de realitzar qualsevol manteniment o neteja.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet abans de continuar amb la instal·lació.

Aiphone GT-BCX Expanded Audio Bus Control Unit
Manual d'instal·lació (aquest document)
Necessary mounting hardware for DIN rail installation

4. Configuració i instal·lació

Follow these steps for proper installation of the GT-BCX unit.

4.1 Muntatge

The GT-BCX unit is designed for DIN rail mounting. Ensure the DIN rail is securely installed in a suitable enclosure or panel.

Align the GT-BCX unit with the DIN rail.
Press the unit firmly onto the rail until it clicks into place, ensuring it is securely fastened.

Aiphone GT-BCX Expanded Audio Bus Control Unit mounted on a DIN rail

Image 1: The Aiphone GT-BCX Expanded Audio Bus Control Unit, typically shown mounted on a DIN rail. This image illustrates the compact design and connection terminals of the unit.

4.2 Cablejat

The GT-BCX unit requires specific wiring for connection to the GT Series intercom system and power supply.

Tipus de cable: Use 2-conductor, solid, non-shielded wire with PE insulation for bus connections.
Connexió d'alimentació: Connect the 24V DC power source to the designated power terminals on the GT-BCX unit. Observe correct polarity.
Connexions d'autobús: Connect the GT Series intercom bus lines to the appropriate terminals on the GT-BCX unit. Refer to the GT Series system manual for specific bus wiring diagrams.
Posada a terra: Assegureu-vos de posar a terra correctament segons els codis elèctrics locals.

4.3 Engegada inicial

Once all connections are secure, apply power to the unit. Observe any indicator lights for proper operation. Refer to the GT Series system manual for system-wide configuration and testing procedures.

5. Operating the GT-BCX Unit

The GT-BCX unit functions as an integral part of the Aiphone GT Series Multi-Tenant Intercom system. It expands the audio bus capabilities, allowing for more extensive and complex intercom configurations. Its operation is largely automatic once properly installed and configured within the GT Series system. It manages and routes audio signals across the expanded bus, ensuring clear communication between various intercom stations.

Specific operational details, such as call routing, tenant station programming, and system-wide audio adjustments, are managed through the main GT Series control unit and associated software. The GT-BCX unit provides the necessary hardware infrastructure for these expanded audio functions.

6. Manteniment

The Aiphone GT-BCX unit is designed for reliable, long-term operation with minimal maintenance. However, periodic checks can help ensure optimal performance.

Neteja: Gently wipe the exterior of the unit with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
Connexions: Inspeccioneu periòdicament totes les connexions del cablejat per assegurar-vos que estiguin ben fixades i que no presentin corrosió.
Medi ambient: Ensure the installation environment remains free from excessive dust, moisture, and extreme temperatures.
Firmware: Consult Aiphone's official website or your system integrator for information on potential firmware updates for the GT Series system, which may affect the GT-BCX unit's performance.

7. Solució De Problemes

If you encounter issues with your GT-BCX unit or the GT Series intercom system, refer to the following table for common problems and solutions.

Problema	Causa possible	Solució
Sense llum indicadora d'alimentació	Incorrect 24V DC power connection or no power supply.	Verify 24V DC power supply is connected and active. Check polarity of power connections.
No audio through expanded bus	Incorrect bus wiring or configuration issue in the main GT Series control unit.	Check bus wiring for correct connections and continuity. Consult the GT Series system manual for configuration settings.
Àudio intermitent	Loose wiring connections or interference.	Secure all wiring connections. Ensure proper wire type (2-cond, solid, non-shielded) is used. Check for sources of electrical interference.
Unit not recognized by GT Series system	Improper bus connection or system configuration.	Verify bus connections are correct. Ensure the GT Series main control unit is properly configured to recognize expanded bus units.

If the problem persists after attempting these solutions, contact Aiphone technical support or your system integrator for further assistance.

8. Especificacions

Key technical specifications for the Aiphone GT-BCX Expanded Audio Bus Control Unit:

Característica	Especificació
Número de model	GT-BCXB-N
Font d'alimentació	24V DC
Muntatge	Carril DIN
Wire Type (Bus)	2-conductor, solid, non-shielded, PE insulation
Dimensions (L x A x A)	8.9 x 5.3 x 3.3 polzades (22.6 x 13.5 x 8.4 cm)
Pes de l'article	1.25 lliures (0.57 kg)
Material de construcció	Plàstic ABS
Dispositius compatibles	GT Series Multi-Tenant Intercom Systems
Tecnologia de connectivitat	Amb cable

9. Garantia i Suport

Aiphone Corporation products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Aiphone website. Technical support is available to assist with installation, troubleshooting, and general inquiries.

Aiphone Corporation Contact Information:
Please visit the official Aiphone website for the most current contact details, support resources, and service center locations.

	Aiphone GT Series Multi-Tenant Entry Security Intercom Parts Reference Guide Comprehensive parts reference guide for the Aiphone GT Series Multi-Tenant Entry Security Intercom system, detailing tenant stations, guard stations, door stations, control units, and accessories with product specifications and compatibility information.
	Aiphone GT-2C Tenant Station: Basic Operation Guide Learn the basic functions of the Aiphone GT-2C Tenant Station, including operation buttons, power supply, and controls for intercom and security features. This guide details button operations, symbol meanings, and system controls.
	Guia d'operació de l'estació de l'inquilí de l'Aiphone GT-1C Guia completa d'operació de l'estació de servei Aiphone GT-1C. Apreneu sobre la font d'alimentació, la pantalla LCD, l'altaveu, el micròfon i les funcions de botons com ara Obrir porta, Opció, Protecció, Parlar i Apagar, juntament amb els controls laterals de brillantor, volum i zoom.
	Aiphone GT-1C7 Tenant Station Operation Guide This guide provides basic operational information for the Aiphone GT-1C7 Tenant Station, detailing its various buttons, controls, and functions for communication and security.
	Guia d'operació de l'estació de l'inquilí Aiphone GT-1M3 Guia concisa de les funcions bàsiques i el funcionament de l'estació d'inquilí Aiphone GT-1M3, que detalla els controls i les característiques per als sistemes d'intercomunicació d'edificis.
	Guia d'operació de l'estació de lloguer de la sèrie Aiphone GT Una guia concisa de les funcions bàsiques de l'estació de servei Aiphone GT Series, que cobreix la compatibilitat amb audiòfons, la font d'alimentació, el funcionament del telèfon, el control de volum del timbre i les funcions dels botons.

Aiphone GT-BCXB-N