Jebao JP900

Jebao JP900 145 GPH Submersible Pump Instruction Manual

1. Acabatview

The Jebao JP900 is a versatile 120V speed-adjustable submersible water pump designed for both indoor and outdoor applications. It features a compact design and is ideal for various water features, including fountains and tile saws, providing a maximum flow of 145 gallons per hour (GPH) and a maximum head of 45 inches.

Jebao JP900 Submersible Pump

Image: The Jebao JP900 submersible pump, a compact black unit with a power cord and an adjustable flow nozzle. The label indicates it is a 120V, 0.14A, 60Hz pump, impedance protected, and suitable for indoor and outdoor use.

2. Especificacions del producte

CaracterísticaEspecificació
MarcaJebao
ModelJP900
Voltage120 V CA
Actual0.14A
Freqüència60 Hz
Màx. Velocitat de flux145 GPH (548.88 Liters Per Hour)
Màx. Cap45 polzades
Mides de la bomba (L x A x A)2.75" x 1.88" x 2.25"
Longitud del cable6 peus
Tube Connectors Included1/2" i 5/16"
MaterialPlàstic, acer inoxidable
Pes de l'article1 lliures
Apte perÚs interior / exterior
ProteccióImpedància protegida
Classificació IPIPX8

3. Informació de seguretat

ADVERTÈNCIA: Per reduir el risc de descàrrega elèctrica:

  • Connect only to a properly grounded, grounding-type receptacle.
  • Install only on a Ground-Fault Circuit-Interrupter (GFCI) protected circuit.
  • Aquesta bomba no ha estat investigada per utilitzar-la en piscines o zones marines.

PRECAUCIÓ:

  • Aquesta bomba ha estat avaluada per utilitzar-la només amb aigua.
  • No connecteu a cap voltage other than that shown on the pump label.
  • No bombeu líquids inflamables.
  • The maximum operation depth is 1.5m (approximately 4.9 feet).
  • No es pot canviar el cable de subministrament. Si el cable està danyat, s’ha de desfer l’aparell.
  • If the plug or receptacle is wet, do not unplug the cord. Disconnect the fuse or circuit breaker that supplies power to the appliance. Then unplug and examine for presence of water in the receptacle.
  • La bomba no està pensada per ser utilitzada per nens petits o persones malaltes sense supervisió.

4. Configuració i instal·lació

The Jebao JP900 pump is designed for easy setup. Ensure the pump is completely submerged in water when operating. For optimal performance, there should be at least 2 inches of water covering the pump.

The pump includes two size tube connectors (1/2" and 5/16") to fit various applications. Attach the appropriate connector to the pump's outlet.

The pump features suction cups on its base for secure placement on smooth surfaces within your water feature.

Visual Guide: Increasing Water Flow and Setup

Video: This video demonstrates how to increase the water flow of a submersible pump, including steps for disassembling, cleaning the impeller, installing the smallest nozzle, setting the valve to maximum flow, and ensuring the pump is completely submerged with at least 2 inches of water covering it for optimal performance.

5. Funcionament

Once installed and fully submerged, plug the pump into a properly grounded GFCI-protected outlet. The pump is speed-adjustable, allowing you to control the water flow rate to suit your needs. Locate the flow control valve on the side of the pump (often marked 'MAX' or with a dial) and adjust it to achieve the desired flow.

6. Manteniment i neteja

Regular maintenance is crucial for the longevity and optimal performance of your Jebao JP900 pump. We recommend cleaning the pump every 2 weeks, or more frequently depending on water conditions and usage.

Procediment de neteja:

  1. Remove the pump from the fountain: Unplug the pump and carefully remove it from the water feature.
  2. Disassemble the pump: Carefully take apart the pump body. Remove the filter by pulling it off. Locate the gland and rotor; the rotor is often held in place by a magnet. Use a fingernail or a slim object to lift out the rotor.
  3. Components nets: Clean the impeller and wash away any blockages or debris. Use a cotton swab or bottle brush to clean the pump's cavity. For stubborn build-up or hard water deposits, clean the parts with white vinegar.
  4. Torneu a muntar: Once all parts are clean and well-rinsed, reassemble the pump by installing the rotor, then the gland, and finally the filter.

Important: Periodically change the water in your fountain to prevent the formation of sticky residues and microorganisms. Do not allow the pump to freeze in winter; always remove the pump from outdoor features and store it in a frost-free location.

7. Solució De Problemes

Si la bomba no funciona com s'espera, consulteu els problemes i solucions habituals següents:

ProblemaCausa possibleSolució
Pump not working / No start at all or stops immediately after startCan't restart after dry burning; GFCI leakage circuit breaker is actuated; Impeller is caught by foreign substance; Repair the point of leakage; Voltage drop; Frozen discharge hose/pipeWait till the pump temperature drops to 113°F (45°C); Check the power circuit; Contact us for a replacement if within warranty; Raise the voltage to the rating; Allow hose/pipe to thaw
No pumping or poor performanceDischarge hose is clogged; Impeller clogged; Low flow rateUnclog hose; Clean the pump and impeller; Check the water level to make sure the pump is completely submerged.
Soroll anormalImpeller clogged; Air in the pump housingClean the impeller assembly and the cavity with clean water; Temporarily remove the pump from the water and re-submerge it.
La bomba no s'aturaThermal protection is actuatedRemove foreign substance if the impeller is stuck.

8. Garantia i assistència

Garantia:

This product has a warranty of one year for any defects in materials or workmanship. The warranty is not valid if the pump is not properly used, neglected, or if there is a lack of maintenance. If the pump fails due to a manufacturing fault within the warranty period, the pump will be replaced free of charge. This warranty excludes the filter and rotor, which may require replacing annually.

Suport:

For further assistance or inquiries, please contact Jebao Electrical Appliances Co.,Ltd. via their official channels:

Documents relacionats - JP900

Preview Manual d'usuari de la bomba submergible Jebao
Manual del propietari per a les bombes submergibles Jebao, models PP-355 i PP-377. Proporciona instruccions de funcionament, avisos de seguretat i manteniment.
Preview Manual de l'usuari de la bomba Jebao DC: models DCP-2500 a DCP-20000
El Manual del propietari de la bomba de corrent continu Jebao proporciona instruccions completes per al funcionament, la instal·lació, el manteniment i la resolució de problemes segurs dels models DCP-2500, DCP-3000, DCP-4000, DCP-5000, DCP-6500, DCP-8000, DCP-10000, DCP-15000, DCP-18000 i DCP-20000. Obteniu informació sobre funcions com el cabal ajustable, el mode d'alimentació, la funció de memòria i la protecció contra l'apagada automàtica per a aplicacions submergibles i no submergibles en entorns marins i d'aigua dolça.
Preview Jebao RF-B Series Automatic Feeder User Manual
Comprehensive user manual for the Jebao RF-B Series Automatic Feeder, detailing installation, operation, features, maintenance, and troubleshooting for aquarium fish feeding.
Preview Manual d'usuari del fabricant d'ones intel·ligents Jebao: configuració, funcionament i resolució de problemes
Manual d'usuari complet per al Jebao Smart Wave Maker (SÈRIE MCP, MLW, MOW), que cobreix la instal·lació, les funcions, el control de l'aplicació mitjançant Jebao Aqua, els diversos modes d'ona, la resolució de problemes i el manteniment. Apreneu a configurar i utilitzar el vostre Jebao Smart Wave Maker per aconseguir unes condicions òptimes per a l'aquari.
Preview Manual d'usuari de la bomba de font UV Jebao
Manual d'usuari per a les bombes de font UV Jebao UFP-1000 i UFP-2000, que detalla les instruccions d'instal·lació, manteniment, resolució de problemes i seguretat.
Preview Manual d'usuari de la bomba Jebao DC - Sèrie DCP
Manual d'usuari complet per a les bombes de corrent continu Jebao (DCP-2500 a DCP-20000), que cobreix les característiques, el funcionament, el manteniment i la resolució de problemes.