Manual d'usuari del comandament a distància per a exteriors Prime TNOREM02 amb 2 endolls i transmissor sense fil

Introducció

The Prime TNOREM02 is an outdoor remote control system designed to provide convenient wireless operation for two grounded electrical devices. It includes a receiver unit with two 3-prong grounded outlets and a wireless transmitter (remote control) for switching connected devices on and off from a distance. This manual provides essential information for the safe and effective use of your Prime TNOREM02.

Image: The Prime TNOREM02 outdoor remote control system, showing the receiver unit with its power cord and the compact wireless transmitter.

Informació de seguretat

Si us plau, llegiu i comprengui totes les instruccions de seguretat abans d'utilitzar aquest producte. Si no segueix aquestes instruccions, pot provocar descàrregues elèctriques, incendis o lesions greus.

• Només per a ús exterior: This product is designed for outdoor use. Ensure all connections are protected from direct exposure to water.
• Posada a terra: The receiver unit features two 3-prong grounded outlets and a grounded plug. Always connect to a properly grounded outdoor receptacle.
• Valoració elèctrica: No supereu la classificació elèctrica màxima de 15 Amps, 1875 Watts, 125 Volts, or 1/3 Horsepower. Overloading can cause overheating and fire.
• Protecció de l'aigua: While designed for outdoor use, avoid submerging the unit in water. Ensure the outlets are facing downwards when installed to prevent water accumulation.
• Gestió de cordons: Route cords to prevent tripping hazards and protect them from damage.
• Advertència de la proposta 65: Aquest producte pot contenir productes químics coneguts per l'estat de Califòrnia per causar càncer i defectes de naixement o altres danys reproductius. Rentar-se les mans després de la manipulació.
• Seguretat de la bateria: The remote control uses a CR2032 3V button-cell battery. Keep batteries out of reach of children. If swallowed, seek immediate medical attention.

Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• 1 x Prime TNOREM02 2-Outlet Outdoor Remote Control Receiver
• 1 x Wireless Transmitter (Remote Control)
• 1 x CR2032 3V Button-Cell Battery (pre-installed in transmitter)

Image: The Prime TNOREM02 product packaging, showing the receiver and remote control clearly visible through the clear plastic.

Característiques del producte

• Endolls amb doble connexió a terra: Two 3-prong grounded outlets for connecting multiple devices.
• Funcionament sense fil: Control devices from up to 80 feet away using the included transmitter.
• Classificació exterior: Durable construction suitable for outdoor environments.
• "Reversed" Ground-Pin: Patented design allows for use with right-angle and larger transformer plugs without blocking the second outlet.
• Simple On/Off Control: Easy-to-use 2-button remote for instant power control.
• Bateria inclosa: Transmitter comes with a replaceable CR2032 3V button-cell battery.

Imatge: Un primer pla view of the Prime TNOREM02 receiver unit, highlighting the two 3-prong grounded outlets.

Configuració

1. Seleccioneu la ubicació: Choose a suitable outdoor location for the receiver unit. Ensure it is protected from direct heavy rain and positioned where its outlets face downwards.
2. Connecteu el receptor: Connect the receiver unit's grounded plug into a standard 3-prong outdoor electrical outlet.
3. Connexió de dispositius: Plug the devices you wish to control into the two grounded outlets on the receiver unit. Ensure the total wattagLa potència dels dispositius connectats no supera els 1875 watts.
4. Prepare Transmitter: The CR2032 3V button-cell battery is pre-installed in the wireless transmitter. If the remote does not respond, check the battery.

Image: The Prime TNOREM02 receiver unit installed outdoors, connected to two green extension cords, with a hand holding the remote control to operate connected lights.

Instruccions de funcionament

Using the Prime TNOREM02 is straightforward:

• Encendre: Premeu el botó ON button on the wireless transmitter. The indicator light on the receiver unit should illuminate, and connected devices will receive power.
• Apagar: Premeu el botó OFF button on the wireless transmitter. The indicator light on the receiver unit should turn off, and connected devices will lose power.
• Interval: The wireless transmitter has an operating range of up to 80 feet. Obstructions such as walls or dense foliage may reduce this range.

Manteniment

The Prime TNOREM02 requires minimal maintenance. The primary maintenance task is replacing the battery in the wireless transmitter.

Replacing the Transmitter Battery:

1. Locate the battery compartment on the back of the wireless transmitter.
2. Using a small screwdriver or coin, carefully open the battery compartment cover.
3. Remove the old CR2032 3V button-cell battery.
4. Insert a new CR2032 3V button-cell battery with the positive (+) side facing up.
5. Col·loqueu la coberta del compartiment de la bateria amb seguretat.
6. Test the remote control to ensure it is functioning correctly.

Periodically inspect the receiver unit and its cords for any signs of damage, wear, or corrosion. Discontinue use if any damage is observed.

Resolució de problemes

Especificacions

Garantia i Suport

Specific warranty information for the Prime TNOREM02 is not provided in the available product details. For warranty claims or technical support, please contact Prime customer service directly. Retain your proof of purchase for any warranty inquiries.

For further assistance, refer to the official Prime weblloc web o contacteu amb els seus canals d'atenció al client.