1. Introducció
This manual provides essential information for the proper installation, operation, and maintenance of your Kidde i9040 Battery-Operated Ionization Smoke Alarm. Please read it thoroughly before installation and retain it for future reference. This device is designed to detect smoke and alert occupants to potential fire hazards.
2. Informació important de seguretat
- This smoke alarm is designed for residential use only.
- Do not paint the smoke alarm. Paint can clog the sensing chamber and prevent the alarm from operating correctly.
- Test the smoke alarm weekly to ensure proper function.
- Replace the battery immediately when the low battery warning sounds.
- Never ignore a smoke alarm. Investigate the cause and take appropriate action.
- This alarm is not intended to replace proper fire safety practices, including regular fire drills and escape plans.
3. Producte acabatview
The Kidde i9040 is a compact, battery-operated ionization smoke alarm. Ionization smoke alarms are generally more effective at detecting fast-flaming fires.
Figura 1: Frontal view of the Kidde i9040 smoke alarm, showing the test button and alarm grille. The text "PUSH AND HOLD TO TEST WEEKLY" and "DO NOT PAINT" are visible.
Key features include a test/hush button, a loud alarm, and a battery compartment for easy replacement.
Figura 2: posterior view of the Kidde i9040 smoke alarm with the mounting bracket and battery compartment visible. A 9V battery is shown installed, along with mounting hardware.
4. Configuració i instal·lació
4.1 Selecció d'una ubicació
For optimal protection, install smoke alarms in every sleeping room and on every level of your home, including the basement.
Figure 3: Recommended placement diagram for smoke alarms, heat alarms, carbon monoxide alarms, and fire extinguishers within a typical home structure. Ionization smoke alarms are indicated by red dots.
4.2 Instruccions de muntatge
- Twist the mounting bracket counter-clockwise to separate it from the alarm unit.
- Position the mounting bracket on the ceiling or wall at your chosen location. Mark the two mounting holes.
- Drill two 3/16 inch (5 mm) holes at the marked locations. Insert the plastic screw anchors (if applicable).
- Fixeu el suport de muntatge amb els cargols proporcionats.
- Install the 9V battery into the battery compartment. Ensure correct polarity (+ to + and - to -).
- Align the alarm unit with the mounting bracket and twist clockwise until it locks into place.
- Proveu l'alarma immediatament després de la instal·lació.
Figure 4: A standard 9V battery, required for operation of the Kidde i9040 smoke alarm.
5. Instruccions de funcionament
5.1 Funcionament normal
The smoke alarm is continuously monitoring for smoke. A red LED indicator will flash approximately once every 30-40 seconds to confirm it is operating correctly.
5.2 Prova de l'alarma
Press and hold the test button on the front cover for a few seconds. The alarm will sound a loud, pulsating horn. Release the button to stop the alarm. Test weekly.
5.3 Condició d'alarma
When smoke is detected, the alarm will sound a loud, pulsating horn. The red LED will flash rapidly.
5.4 Funció de silenci
If a nuisance alarm occurs (e.g., from cooking fumes), press the test/hush button. This will silence the alarm for approximately 7-10 minutes. The red LED will flash every 10 seconds during the hush period. The alarm will automatically reset after the hush period, or sooner if smoke density increases.
6. Manteniment
6.1 Substitució de la bateria
The smoke alarm requires one 9V battery. When the battery is low, the alarm will "chirp" approximately once every 30-40 seconds. Replace the battery immediately.
- Gireu l'alarma en sentit antihorari per treure-la del suport de muntatge.
- Obriu el compartiment de la bateria.
- Traieu la bateria antiga i llenceu-la correctament.
- Install a new 9V battery, ensuring correct polarity.
- Close the battery compartment and re-attach the alarm to the mounting bracket.
- Proveu l'alarma després de substituir la bateria.
6.2 Neteja de l'alarma
Clean your smoke alarm at least once a month.
- Traieu l'alarma del suport de muntatge.
- Use a soft brush attachment on your vacuum cleaner to remove dust and debris from the alarm's cover and vents.
- No utilitzeu aigua, productes de neteja ni dissolvents, ja que poden fer malbé la unitat.
- Re-install the alarm and test it.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| L'alarma sona cada 30-40 segons | Bateria baixa | Substituïu la bateria de 9V. |
| Alarm sounds frequently without smoke | Nuisance alarm (cooking fumes, steam), dust in sensing chamber, improper placement. | Use hush feature. Clean the alarm. Relocate if consistently triggered by non-fire sources. |
| L'alarma no sona durant la prova | Dead or improperly installed battery, faulty unit. | Check battery installation and replace if necessary. If problem persists, replace the alarm. |
| El LED vermell no parpelleja | No power, faulty unit. | Check battery. Replace alarm if LED still does not flash. |
8. Especificacions
- Model: Kidde i9040
- Tipus de sensor: Ionització
- Font d'alimentació: 9V Battery (1 required)
- Volum de l'alarma: 85 dB a 10 peus
- Temperatura de funcionament: De 40 °C (4.4 °F) a 100 °C (37.8 °F)
- Humitat de funcionament: 10% - 95% relative humidity, non-condensing
- Dimensions: Approximately 4.2 x 4.2 x 3.2 inches (package dimensions, actual unit is slightly smaller)
- Pes: Approximately 8 ounces (with battery)
- UPC: 635231841780
9. Garantia i Suport
For warranty information or technical support, please refer to the contact information provided on the product packaging or visit the official Kidde weblloc web. Conserveu el rebut de compra com a comprovant de compra.
Fabricant: Kidde
Weblloc: www.kidde.com
