1. Introducció
The Stelpro SWT2F Double Pole Thermostat is designed for precise temperature control of electric heating systems operating between 120V and 277V, up to 22 amps. This manual provides essential information for the safe installation, operation, and maintenance of your thermostat. Please read these instructions thoroughly before beginning installation or use.
2. Informació de seguretat
To prevent personal injury or property damage, observe the following safety precautions:
- Desconnecteu l'alimentació: Always disconnect power to the heating system at the main electrical panel before installing or performing any maintenance on the thermostat.
- Electricista qualificat: La instal·lació ha de ser realitzada per un electricista qualificat d'acord amb tots els codis elèctrics locals i nacionals.
- Ús previst: This thermostat is designed exclusively for controlling electric heating systems. Do not use it for other applications.
- Voltage i Ampera: Assegureu-vos que el volum del termòstattage i amperage ratings (120-277V, 22A) are compatible with your heating system.
- Double Pole Disconnect: The SWT2F model provides a double pole disconnect, meaning it completely cuts power to both lines of the heating circuit when turned to the 'OFF' position, enhancing safety.
3. Característiques del producte
The Stelpro SWT2F thermostat offers reliable and straightforward temperature control:
- Mechanical Dial: Easy-to-use rotary dial for setting desired temperature.
- Interval de temperatura: Ajustable d'10 °C a 32 °C (50 °F a 90 °F).
- Double Pole Design: Provides a complete power disconnect to the heater when set to 'OFF'.
- Compatibilitat: Suitable for electric baseboards, fan-forced heaters, and commercial fan-forced heaters with a 120-277 Vac coil contactor.
- Disseny elegant: Pro baixfile white molded plastic housing blends with various decors.
Figura 3.1: Frontal view of the Stelpro SWT2F Thermostat.
Figure 3.2: Double Pole functionality of the SWT2F Thermostat.
4. Instal·lació
4.1 Abans de començar
- Ensure power to the heating circuit is OFF at the main electrical panel.
- Confirm the thermostat's ratings match your heating system's requirements.
- Gather necessary tools: screwdriver, wire strippers, electrical tape, voltage provador.
4.2 Muntatge
The thermostat is designed for wall mounting. It should be installed on an electrical box at approximately 5 feet (1.5 meters) from the floor, on an inside wall. Avoid locations near windows, doors, or heat sources that could affect temperature readings.
Figure 4.1: Stelpro SWT2F Thermostat Dimensions.
4.3 Cablejat
WARNING: Risk of electric shock. Installation must be performed by a qualified electrician.
- Assegureu-vos que l'alimentació estigui DESCONNECTADA a l'interruptor principal.
- Connect the thermostat wires to the heating system's supply wires and heater wires according to the wiring diagram provided with your specific heating unit and local electrical codes. The SWT2F is a double pole thermostat and will have four wires for connection (two for line input, two for load output).
- Secure all wire connections with appropriate wire connectors.
- Carefully push the wires back into the electrical box and mount the thermostat to the wall box.
- Restableix el subministrament elèctric al quadre elèctric principal.
5. Funcionament
5.1 Configuració de la temperatura
The Stelpro SWT2F thermostat features a simple rotary dial for temperature adjustment:
- Ajust: Rotate the dial clockwise to increase the desired temperature and counter-clockwise to decrease it. The temperature scale ranges from 50°F to 90°F.
- Posició OFF: For complete power disconnection to the heater, turn the dial fully counter-clockwise past the 50°F mark to the 'OFF' position (indicated by a snowflake symbol). This feature is specific to double pole models like the SWT2F.
- Fluctuació de la temperatura: The thermostat operates with a 4°F set point, meaning the room temperature may fluctuate within approximately 4°F of your desired setting before the heating system activates or deactivates. This is normal operation to prevent rapid cycling.
Figura 5.1: Angle view of the thermostat showing the control dial.
6. Manteniment
The Stelpro SWT2F thermostat requires minimal maintenance:
- Neteja: Netegeu periòdicament l'exterior del termòstat amb un drap suau i sec.amp tela. No utilitzeu netejadors abrasius ni dissolvents.
- Sense peces reparables per l'usuari: The thermostat contains no user-serviceable parts. Do not attempt to open or repair the unit.
- Flux d'aire clar: Ensure that the thermostat's vents (if any) are not obstructed by dust or objects, as this can affect temperature sensing accuracy.
7. Solució De Problemes
Consulteu la taula següent per veure els problemes habituals i les seves possibles solucions:
| Problema | Causa possible | Solució |
|---|---|---|
| L'escalfador no s'encén. | Thermostat set to 'OFF' or too low. No power to the circuit. Faulty wiring. | Turn dial to a higher temperature. Check circuit breaker. Verify wiring connections (consult electrician). |
| Heater not turning off. | Thermostat set too high. Thermostat malfunction. | Turn dial to a lower temperature or 'OFF'. If problem persists, consult electrician or replace thermostat. |
| Lectura de temperatura inexacta. | Thermostat located near draft or heat source. Normal temperature fluctuation (4°F hysteresis). | Relocate thermostat if possible. Understand that minor fluctuations are normal. |
| Thermostat feels warm. | Normal operation due to electrical current passing through. | This is generally normal. If it feels excessively hot or emits smoke/smell, disconnect power immediately and consult an electrician. |
8. Especificacions
| Característica | Detall |
|---|---|
| Model | SWT2F |
| Tipus | Double Pole Mechanical Thermostat |
| Voltage | 120-277 volts de corrent altern |
| Màxim Ampedat | 22 Amps |
| Wat màxtage | 6094 watts |
| Interval de temperatura | De 50 °F a 90 °F (de 10 °C a 32 °C) |
| Tipus de control | Manual Rotary Dial |
| Dimensions (A x A x P) | 4.58" x 2.9" x 1.61" (116 mm x 74 mm x 41 mm) |
| Tipus de muntatge | Wall Mount (on electrical box) |
| Material | Plàstic |
| Connectivitat | Amb cable |
9. Garantia i Suport
9.1 Informació de la garantia
The Stelpro SWT2F Thermostat is backed by a Garantia limitada d'5 any del fabricant. Aquesta garantia cobreix els defectes de materials i de fabricació en condicions d'ús normal. Conserveu el comprovant de compra per a reclamacions de garantia.
9.2 Atenció al client
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Stelpro customer support. Refer to the official Stelpro weblloc web o l'embalatge del producte per obtenir la informació de contacte més actualitzada.
