Fluke T130 Voltage i Tester de continuïtat
Model: FLUKE-T130
Marca: Fluke
Introducció
El Fluke T130 Voltage and Continuity Tester is a robust and reliable tool designed for electrical professionals. It features large, easy-to-use buttons, a bright backlit LED indicator, an LCD display, display hold, and clear audible and vibrating voltage indicators. This two-pole tester is essential for verifying the absence of voltage before working on any circuit, ensuring user safety and accurate measurements.
Image: The Fluke T130 Voltage and Continuity Tester, showing its yellow body, black probes, backlit LCD, and LED indicators.
Informació de seguretat
Always observe standard safety precautions when working with electrical equipment. Failure to do so may result in injury or damage to the tester or equipment under test.
- Llegeix i entén totes les instruccions abans d'utilitzar.
- Do not use the tester if it appears damaged or operates abnormally.
- Verifiqueu el funcionament del provador en una font d'energia en directe coneguda abans i després de l'ús.
- Complir els codis de seguretat locals i nacionals.
- Utilitzeu equips de protecció individual (EPI) adequats.
- The tester is designed according to IEC EN 61243-3:2014 to verify the absence of voltage, even with discharged batteries.
- CAT IV 600 V, CAT III 690 V safety rating.
Què hi ha a la caixa
The Fluke T130 package typically includes the following items:
- Fluke T130 Voltage i Tester de continuïtat
- Rubber tip protector
- 2x GS38 Probe Tip Sheath
- 2x 4 mm Ø Probe Extensions
- 2 AA batteries (pre-installed or included separately)
Configuració
Instal·lació de la bateria
The Fluke T130 requires 2 AA batteries for operation. These are typically included. To install or replace batteries:
- Localitzeu la tapa del compartiment de la bateria a la part posterior del provador.
- Use a suitable tool (e.g., a screwdriver) to open the compartment.
- Introduïu les 2 piles AA, assegurant-vos de la polaritat correcta (+ i -).
- Tanqueu de manera segura la tapa del compartiment de la bateria.
Probe Tip Accessories
Attach the appropriate probe tip accessories (GS38 Probe Tip Sheath or 4 mm Ø Probe Extensions) as required for your measurement application. Ensure they are securely fitted to the probe tips.
Instruccions de funcionament
The Fluke T130 offers multiple ways to indicate the presence of voltage, including LED indicators, an LCD display, an audible tone, and tactile feedback (vibration).
Voltage Mesura
- Ensure the tester is clean and in good working condition.
- Connect the two probes to the circuit or component you wish to test.
- The tester will automatically detect AC or DC voltage and display the reading on the LCD.
- LED indicators will illuminate corresponding to voltage levels (e.g., 12V, 24V, 50V, 120V, 230V, 400V, 690V).
- An audible tone and vibration will also indicate the presence of voltage.
- Use the "Display Hold" function to freeze the reading on the LCD if needed.
Prova de continuïtat
- Assegureu-vos que el circuit estigui desenergitzat abans de realitzar una prova de continuïtat.
- Connect the two probes across the component or wire you want to test for continuity.
- If continuity is present (low resistance), the continuity LED will illuminate, and an audible tone will sound.
Switchable Load (Ghost Voltage Suppression)
The T130 features a switchable load function to avoid the display of "ghost voltages" (induced voltages in open circuits). Press the designated button to activate the load, which draws more current from the circuit under test, allowing for a more accurate voltage reading and preventing nuisance tripping of Residual Current Devices (RCDs).
Phase Rotation Indication
For three-phase systems, the T130 can indicate phase rotation. Follow the instructions in the full user manual for detailed steps on performing this test.
Manteniment
Neteja
Clean the tester's case with a damp cloth and mild detergent. Do not use abrasives or solvents. Ensure the tester is dry before storage or use.
Canvi de bateria
Replace batteries when the low battery indicator appears on the LCD or when the tester's performance degrades. Refer to the "Battery Installation" section under Setup for instructions.
Emmagatzematge
Store the tester in a dry, cool place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El provador no s'encén. | Piles gastades o instal·lades incorrectament. | Canvieu les piles, assegurant-vos de la polaritat correcta. |
| Vol inexactetage lectures. | Fantasma voltages; poor probe contact. | Activate switchable load; ensure firm probe contact. |
| Sense indicació de continuïtat. | Open circuit; faulty component. | Verify circuit integrity; test component separately. |
| La pantalla LCD està tènue o parpelleja. | Bateria baixa. | Substituïu les piles. |
Especificacions
| Característica | Detall |
|---|---|
| Número de model | FLUKE-T130 |
| Classificació de seguretat | CAT IV 600 V, CAT III 690 V |
| Font d'alimentació | Alimentat per piles (2 piles AA incloses) |
| Dimensions del producte | 13.39 x 3.43 x 2.24 polzades |
| Pes de l'article | 0.28 quilograms (9.88 unces) |
| Mostra | Backlit LCD readout, LED indicators |
| Voltage Indicació | LED, LCD, Audible Tone, Tactile Feedback (Vibration) |
| Cable Durability | Dual insulated cable tested to 3x required bend angle |
| Característiques especials | Switchable load (ghost voltage suppression), Display Hold |
| Fabricant | Fluke |
| País d'origen | Regne Unit |
Garantia i Suport
Fluke products are known for their quality and reliability. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Fluke weblloc.
Atenció al client
For technical assistance, troubleshooting, or service, please contact Fluke customer support. Contact information can typically be found on the Fluke weblloc o a l'embalatge del producte.
When contacting support, please have your product model number (FLUKE-T130) and serial number (if applicable) ready.
